%!$ Easy Diy Woodworking Bench Plans For You #!@

do-it-yourself-wood-floor-refinishing-file Floor Refinishing without Sanding | -

Last Updated: September 3, References Approved. This article was co-authored by Mark Spelman. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since This article has been viewedtimes. Under old, soiled, dirty carpet may be a beautiful wood floor screaming to be reintroduced to your home.

Coating your floors with a clean, new finish is about as satisfying as it gets. A little hard work and you could have the hardwood floor you've always wanted. Before refinishing your wood floors, rent a detail sander from your local home improvement store and use it to buff away the old finish. Then, plug in any holes with wood paste or wood plugs, and vacuum the floor to remove any sawdust or debris.

Once the floor is ready to be refinished, use a paintbrush to apply the water-based stain or finish. Let the stain dry, then brush on another coat if you want a richer color. However, make sure to sand the area before applying the second coat to ensure a smooth, even finish. For more advice from our General Contracting reviewer, including how remove the old finish using a chemical stripper, keep reading.

Did this summary help you? Yes No. We've been helping billions of people around the world continue to learn, adapt, grow, and thrive for over a decade. Every dollar contributed enables us to keep providing high-quality how-to help to people like you. Please consider supporting our work with a contribution do it yourself wood floor refinishing file wikiHow. Log in Social login does not work in incognito and private browsers.

Please log in with your do it yourself wood floor refinishing file or email to continue. No account yet? Create an account. Edit this Article. We use cookies do it yourself wood floor refinishing file make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article methods.

Tips and Warnings. Things You'll Need. Related Articles. Article Summary. Method 1 of Remove any carpeting from the area. Cut and roll in sections manageable for carrying out to the trash.

Once all carpeting has been removed, move on to the real work. If any of the carpet is stuck to the subfloor, then you may need to scrape it or just give it a good tug to get it unstuck.

Hammer down any protruding nail heads. Nails may have been added to the flooring to cut down on squeaking or to secure a loose baseboard. Either way, nails that are sticking up above the wood floor present both a danger and a nuisance. Most of the time, do it yourself wood floor refinishing file the nails down deeper into the flooring is a better and easier solution than taking the nails out.

Use a nail set so you don't leave hammer marks dents in the wood. Work with their direction, not against it. More on that later. Make sure Do It Yourself Wood Floor Refinishing Without Sanding Art the floor is relatively clean. This can be a rather tedious job, and can take a great deal of time, but it's worth it. Go over the floor with a vacuum and mop if necessary. Years of dust and grit can create a lot of debris.

You want this debris cleared away before you attack the old wood finish. Remove any tack stripping along the floor edges. If tack stripping was present along with your carpet, remove it before you start sanding so that you can hit those areas with your finish. Method 2 of Use sanding to buff up any very old, excessively scratched or worn wood. Chemical strippers can be used if what you're after is a quick fix, or the floors themselves were recently finished.

If, however, you're dealing with traffic patterns, stains, or scratches, your best bet is to sand away those imperfections and then add another coat to the floor. Prep the perimeter. Hand-sand or palm-sand the perimeter of the floor with coarse grit sandpaper. Rub out 4 to 6 inches Use a floor sander. A floor sander is useful to hit the areas of do it yourself wood floor refinishing file floor that weren't hit by hand in the detail sanding.

You can rent floor sanding machines at hardware supply stores or equipment rental stores. Start off gently. You don't want to do it yourself wood floor refinishing file the floor.

If you get a good sander, you'll even be able to lift up the sander and spend a little more time on heavy-wear or problem areas. Change do it yourself wood floor refinishing file your sanding disks as necessary.

You may need to change out the sandpaper once or twice using the same grit before you've completely removed the finish. Using a pencil, color the entire area lightly with streaks of graphite. This will help tell you when you've sanded an area.

Otherwise, it'll be tough to tell where you've sanded and where you haven't. Go over the entire floor again with a medium-grit sandpaper. Look at the pencil streaks to determine whether you've already sanded an area or not. Again, you may need do it yourself wood floor refinishing file change the disks on your sanding machine before the job is finished.

Save the sawdust created by sanding. This will help ensure a nice, even finish. Method 3 of Use a chemical stripper in lieu of sanding.

If you choose to use a chemical stripper, always follow the instructions on the label and use proper safety precautions. Use gloves, goggles, and be sure to do it yourself wood floor refinishing file the area you're working in. Chemical strippers are designed to peel off the finish from wood; you don't want it interacting with your skin, and you don't want to inhale too much of it. Apply the do it yourself wood floor refinishing file on an area of about two square feet.

Don't be timid about applying too much of it. You also don't want to cover too much of an area at once as you will want to be able to clean the area in plenty of time. Let stripper sit for about five minutes. Once you've applied the stripper to the finish, let wait the suggested time without interfering. You will notice the old stain bubbling and lifting from the wood.

Don't wait so long that the stripper dries on you. When you remove the stripper, you want it to still be wet. Remove the stripper from the wood. You can do this in two steps: Hit the area with a putty knife to scrape off the stripper along with the finish.

Use denatured alcohol in a disposable aluminum pan to clean off the remaining stripper with the help of steel wool. Do not put too much denatured alcohol in the pan, as it does tend to quickly evaporate. Follow manufacturer's instructions for cleaning the stripper from the wood. Different chemical strippers will need to be cleaned using different methods. Some strippers need to be cleaned with turpentine or paint remover, while others can simply be rinsed with water.

Allow the area to dry completely. Water or moisture and your new finish don't work well together; be sure to allow the area to dry completely before moving on to the next step. Spot-sand any scratched or worn areas.

You may need to sand any problem areas before you apply the new finish to your wood floors.

Step 3 - Protect Yourself. As this project Do It Yourself Wood Floor Refinishing Without Sanding Win will require you to work with polyurethane, you will need to take certain measures to protect yourself. Even though refinishing a wood floor may not evoke a sense of imminent danger, safety is still job one for any household handyman.

The Carpentry Shop Tappan Ny Youtube Table Saw For Wood And Tiles Simple Woodworking Toy Projects Guide