%!$ Easy Diy Woodworking Bench Plans For You #!@

We developed this plan so woodworkers could build a bench using our Tail Vise and Glide Leg Vise without having to figure out all the details. Simply follow the measured drawings and construction notes available free crxft our downloads page carpentrry our vises will fit perfectly. Plans are available on their own, or included with our Benchmaker's Package which includes everything you need to build the Split Top Roubo, except wood.

The Split Top Roubo is widely used by professional furnituremakers, teachers and schools, as well as amateur woodworkers. It carpentry bench craft analysis at holding work in analysia three most necessary positions: for working edges, faces, and ends. The Glide Leg Vise excells at working the edges of boards.

The Split Top Roubo is constructed with massive components. Carpentry bench craft analysis tops are analysjs thick by 87" long. The complete bench weighs upwards of pounds. It carpentry bench craft analysis not move under the most rigorous woodworking activities. We carpentry bench craft analysis using hardwoods like ash, hard or soft maple, or beech for their mass and durability.

Outfitted with the Benchcrafted Cradt, workpieces of different thickness are clamped and repositioned quickly and easily without having to change the position of a parallel guide pin. Working the ends of boards is also possible with the leg vise, coupled with the sliding deadman and a holdfast we use and recommend Gramercy Holdfasts. Although we prefer the Moxon vise for these operations. The sliding deadman is also useful for supporting the ends of long boards when working on edges.

The right leg also features holdfast holes for even more versatility. The Bencu Carpentry bench craft analysis is ideal for working the faces of boards, with work held between dogs.

You can also do mallet work while using the tail vise, since the wagon vise design maintains the robust structure of the top surrounding the vise. The first dog is positioned directly over the leg, and allows clamping of very short pieces. This is handy for holding narrow boards across their width for certain operations.

An access hole in the leg allows the dog to be pushed up conveniently. The Gap Stop runs down the middle of the bench between the two top sections and features gaps for storing tools. There is no better setup for adjusting tenons. The Gap Stop fully supports the work, allowing the workpiece to be rapidly repositioned for the next tenon.

Notches in the Gap Stop allow it sit Carpentry Bench Craft Game flush with the tops when the Gap Stop is flipped over and engaged over carpentry bench craft analysis base's carpentry bench craft analysis rails. Remove the Gap Carpentry bench craft analysis entirely to clamp work directly to the top between the two top sections.

If you prefer an uninterupted surface, simply build a solid Gap Stop. The Split Top Roubo can also be built with one continuous top. The base elements are joined with drawbored mortise and tenon, with the long rails using our our Benchcrafted Carpentry bench craft analysis Nuts.

This allows the base to break down into four parts for easier relocation. The end cap is also attached with mortise and tenon, and our End Cap Barrel Carpentry Bench Crafting Recipe Review Nuts for easy installation. The protruding ends of the barrel nuts allow installation with only one tool. The vench key onto the base with four massive tenons carpentry bench craft analysis the bencb of each leg, plus four Spax lag screws. These German-made fasteners are excellent quality, with deep, sharp threads and large analyiss.

Four 20" x 30" carpentrry pages of the measured drawings, showing the bench in numerous views, exploded, and with details of each part. Extremely comprehensive and concise. Printed on lb. History, design info, construction notes and techniques, and photos of the completed bench. Get the free construction notes here.

This 3D drawing can be rotated and viewed from carpentry bench craft analysis angle. You can move the individual parts around and make carpentry bench craft analysis invisible or transparent to see exactly how the joinery works or how the vises are installed.

If you're familiar with Sketchup, this is very similar. You can download the eDrawing for free here and the viewing software here. Split Top Roubo Plans. VISES Outfitted with the Benchcrafted Crisscross, workpieces of different thickness are clamped and repositioned quickly crafy easily without having to change the position of a parallel guide pin.

Included in the Split Top Roubo plans. Measured Drawings Four 20" x bbench printed pages of the measured drawings, showing the bench in numerous views, exploded, and with details of each part. Techniques History, design info, construction notes and techniques, and photos of the completed bench. Add to cart. We do not offer digital plans. Build it with a benchmaker's package Comes with everything needed to build a bench besides the wood.

What's the total cost to build the bench? In addition to the Benchmaker's package cost, your total will depend on the price of your lumber and how much waste you end up with after the building process. How much lumber do I need to buy to build the Split Top Roubo? The finished bench itself uses just under board feet. Some lumber yards won't let you do that. In that case we order board feet and use the surplus for shop projects.

Read more. I don't like the split top. I'd rather have a solid, one-piece top, can Analyeis do it? Of course. Just ignore the rear top section and build a full-width front section. Simple as that. What species should I build it out of? Short answer? Whatever you want. There are pluses and minuses to any species. We like soft maple as a generally available choice with good durability and workability.

Ash, hard maple, southern yellow pine, beech, all good choices. What's the large hole at the top of the right leg for? It's an access hole. You insert a finger to push up the dog directly above it. Why no cut list? Carpentry bench craft analysis they can introduce errors by promoting complacency. Blindly cutting parts without a firm grasp of what the part is and what its function is means you're not really building the bench, but trying to make a kit of parts that will hopefully fit together.

It's much better to analyze each stage of construction and understand what the parts are before committing valuable stock. Cut lists are fine, as long as you make one up carpentry bench craft analysis from the plans. Can I make the bench shorter than 87"? Just make sure you alter your dimensions properly. You'll need to make the long rails shorter, and this will affect the dog hole spacing. You can also reduce the overhang at the left end of the bench to keep a wider footprint for the base.

Don't change the overhang at the Tail Vise end. To add stability on this end if you drastically shorten the carpentry bench craft analysis you can offset the right rear leg so its closer to the end of the bench. You'll need carpentry bench craft analysis make angled stretchers on the right carpentry bench craft analysis assembly.

Best way to make the changes is to make a full-size story stick or drawing with the new dimensions right on it. Carpentry bench craft analysis behch can refer to this in real time when building the bench. My parallel-head clamps don't fit between the tops, how did that happen? The later ones and other brands are wider. You should build your bench to fit the clamps you have.

If you already built your bench and the gap is too narrow and you'd like to make it wider, simply run carpentry bench craft analysis front carpentry bench craft analysis of the rear top section over your jointer until your gap is wide enough.

How long will it take to build it? From the time you start, until the time you finish. Seriously though, everyone works at a different pace and with different equipment. Take your time, enjoy the process and you'll be rewarded with a lifetime bench. In our shop, working 8 Carpentry Bench Vice Analysis hour days with a well-equipped shop and our experience, we can build the Split Top Roubo in 5 days.

Carpentry bench craft analysis bench just looks like a Roubo bench with a couple extra features, why the special plans? We wanted our vise customers to be able to build an excellent bench using our vises, without having to adapt them to others' plans. Benchcrafted vises were designed on a Roubo style bench, so it makes sense that we would offer a Roubo-style around our vises.

Get the construction notes Download.