Making A Tool Box Hutch 85,1x3 Lumber Projects Size,Best New Rap Songs Playlist,Lidl Belt And Disc Sander 2020 For Sale - Easy Way
![](https://extremehowto.com/wp-content/uploads/2011/07/art_60981_Max_FINAL1-complete-cabinet-2.jpg)
Include description. Red 16 Items Blue 27 Items Black 18 Items Green 15 Items Orange 14 Items Gold 13 Items Silver 13 Items Yellow 1 Items 1. Not Specified 9 Items 9.
Not Specified Items Cornwell 1 Items 1. Matco Tools 7 Items 7. Snap-on 8 Items 8. Tool Chest Tools For Making Wooden Boxes Us 13 Items Tool Cabinet 26 Items Not Specified 82 Items Handles 63 Items Hutch 17 Items Lockable 9 Items 9. Drawers 8 Items 8. Wheeled 8 Items 8. Ball Bearing Drawer Slide 7 Items 7. Cabinet Top 6 Items 6. Built-In Power Strip 5 Items 5. No Warranty Items Lifetime 3 Items 3. Not Specified 17 Items New Items Used 30 Items Please provide a valid price range.
Use a ruler and a straight edge to evenly space out all boards. Attach the lower shelf on both sides and to each vertical divider. This gives it a nice bold look and strengthens the furniture.
I've been using Ryobi Airstrike Nailers and have been super impressed with them. They are battery powered so I don't have to deal with cords and air compressor noise. You could use a normal hammer and nails if you do not have an air nailer. Center the trim pieces on the 4 dividers.
Now it's time to work on the upper section of the hutch. I used 1x12x6 boards and cut them down to size. A straight edge and a circular saw will work well. You could also use a miter saw. Refer to downloadable plans for more info and photos. I'd recommend using a Kreg Jig right angle clamp if you have one. Drill 3 to 4 pocket holes for each connection. Here is what it will look like after both sides have been attached.
Next figure out the spacing you'd like for each locker. I made the two lockers with 20 inches between the boards. Attach the verticals when you have the correct spacing.
You can see I drilled pocket holes facing down so I could connect the upper unit to the lower bench after completing the project and moving it into the house. Don't forget glue as well!
Drill 3 pocket holes on both the left and right underside. Then attach using screws and glue. Below is a look of the finished front side shelves and trim. View of the backside. Measure and cut bead board to use as paneling for the back of the hutch. I'd recommend cutting them into sections to cover the top unit and lower section separately. This way you can move the furniture in two separate pieces. Cut the bead board with a circular saw.
I'd recommend cutting it from the backside of the paneling. Here is what the paneling looked like after making the cuts. I ended up using the flat side of the bead board for the center area of the hutch so I had a smooth surface for the Denver Bronco's logo. It's time to paint or stain your project! You can buy it at your local Home Depot.
Although the hutch I built is decked out in Denver Broncos colors, you can paint or stain this hutch to work in any part of your home.
Use a roller to apply the paint to the bead board. Since the bead board was already white I did not use a separate primer. Apply 2 coats. Once all of the painting is completed you'll want to attach the paneling using an air nailer or stapler. Completed top unit Completed lower bench unit Use stencils or freehand your favorite team logo onto the hutch. Once you've completed painting or staining the hutch, let it dry and then move move it into your home in the two sections.
Once in place, attach the upper unit to the bench using Kreg Jig screws. You could use flat metal brackets if you'd prefer. Below is a photo of the hutch being used in a kid's bedroom. Plenty of room for toys, shoes, and gear! Job well Making Wooden Boxes With Hand Tools Limited done! I hope this tutorial inspires you to make your own storage hutch. They are great for bedrooms, mudrooms, and sports themed rooms in your home.
![](https://styrke.ca/wp-content/uploads/2018/02/20180215_162403.jpg)
![](https://galleryplus.ebayimg.com/ws/web/274372630821_1_5_1.jpg)
![](https://i.ytimg.com/vi/MviAq_C7wyo/hqdefault.jpg)
Belt And Disc Sander For Steel 05 Heavy Duty Soft Close Lid Support Kit |
HAPPY_NEW_YEAR
08.06.2021 at 16:44:10
EMRE
08.06.2021 at 19:31:21
Bakinochka_fr
08.06.2021 at 10:39:39
AYNUR1
08.06.2021 at 13:50:16