%!$ Easy Diy Woodworking Bench Plans For You #!@

10-table-saw-blade-harbor-freight-track Tables Saws & Bench Saws: Find The Perfect Table Saw at Sears

Failure to do so can result in serious injury. Save this manual. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape 10 Table Saw Blade Harbor Freight Tool or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and 10 table saw blade harbor freight track in a safe and dry 10 table saw blade harbor freight track for future reference.

Cluttered, damp or wet work areas invite injuries. Do not allow children to handle this product. When not in use, tools and equipment should be stored in a dry location to inhibit rust.

Always lock up tools and equipment and keep out of reach of children. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product. Wear ANSI approved 10 table saw blade harbor freight track impact eyeglasses, hearing protectors, and dust masks or respirator when using this product.

ANSI approved safety impact eyeglasses, hearing protectors, dust masks and respirators are available from Harbor Freight Tools. Non-skid footwear or safety shoes should be used when working with this product.

Do not wear loose clothing or jewelry as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing a long-sleeve 10 table saw blade harbor freight track, roll sleeves up above elbows.

Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera. Watch what you are doing at all times. Use common sense. Do not use this product when you are tired or distracted from the job at hand. Before using this product, carefully check that it will operate properly and perform its intended function.

Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts 10 table saw blade harbor freight track. When servicing, use only identical replacement parts. Only use accessories intended for use with this product.

Approved accessories are available from Harbor Freight Tools. Keep this tool clean and dry, and keep Saw Blades clean and sharp for better and safer performance. There are certain applications for which this product was designed.

Do not use small equipment, tools or attachments to do the work of larger industrial equipment, tools or attachments. Do not use this product for a 10 table saw blade harbor freight track for which it was not intended. The electrical power cord for this product is equipped with a grounded 3-Prong Plug.

Never remove the grounding prong or modify the Plug in any way. Do not use adapter plugs with this product. To comply with the National Electric Code, and to provide additional protection from the risk of electrical shock, the Table Saw should only be connected to a Volt, 3 prong electrical outlet that is protected by a Ground Fault Circuit Interrupter GFCI. Do not use the Power Cord part 8F to pull the 3-prong plug from a power outlet.

Keep cord away from heat, oil, sharp edges, and moving parts. Replace damaged cord immediately. Route 10 table saw blade harbor freight track power cord safely. Protect it from being damaged by other equipment in the shop.

Do not route the cord where it can be walked on or tripped over. Do not use this product in or near damp or wet areas. Do not expose this product to rain. Keep the work area well lit. Make sure there is adequate surrounding workspace. 10 table saw blade harbor freight track this product in a well ventilated area. Do not operate this product in the presence of flammable liquids, gases, or dust.

To avoid accidental electric shock, do not let your body come in contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. This Table Saw will do the work better and safer at the speed and capacity for which it was designed. Do not cut dangerous materials, such as asbestos that can cause harmful dust or vapors. When turning it off, allow the Saw Blade to spin down and stop on its own.

Do not press against the Saw Blade to stop it. Caution: Never pass hands directly over the Saw Blade part I when cutting the workpiece. Always push the workpiece into the Saw Blade, using an auxiliary handle or push stick not provided. Apply moderate pressure, allowing the Saw 10 Table Saw Blade Harbor Freight Solution Blade to cut without being forced. Use an auxiliary handle or push stick not provided at all times. Continued To avoid kickback, keep a firm grip on the workpiece at all times.

Support overhanging work pieces; as the work piece is cut and weakens it will sag, causing a pinched Saw Blade. Push the workpiece slower than normal when cutting through knots, pressure treated and green lumber. Do not attempt to force the workpiece back on the cut line if the cut begins to go off line.

Make sure to set the depth adjustment of the Table Saw so that one saw tooth of the Saw Blade projects below the work piece. Use a Roller Stand not provided with a larger 10 table saw blade harbor freight track if necessary. Never allow the workpiece to rest on the moving Saw Blade part I without safely holding on to the workpiece.

Turn off and unplug the Table Saw when leaving the work area, moving the tool from one location to another, changing Saw Blades part Icleaning sawdust from the unit, etcetera.

Never install unauthorized accessories such as shaper cutters, wire wheels, grinding wheels or sanding products. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known to 10 table saw blade harbor freight track State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals; work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Operation of equipment in close proximity to a heart pacemaker could 10 Inch Table Saw Blade Harbor Freight cause interference or failure of the pacemaker. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. See Figures B, C, and Assy. Diagrams A through I. See Figure B, and Assy.

Diagram G. To Assemble The Leg Stand: 1. Repeat the assembly procedure for the remaining one Long Leg Brace and two Legs. Diagram B. Repeat the assembly procedure for the remaining one Short Leg Brace and two Legs. Repeat the assembly procedure for the remaining one Side Brace and two Legs. Repeat 10 table saw blade harbor freight track assembly procedure for the remaining one End Brace and two Legs.

Then, insert one Washer part 3B onto the threads of each of the Leveling Feet. Insert a Leveling Foot, with its threaded portion pointing upward, through the hole located at the bottom of each of the four Legs part 4B. Insert one Washer part 3B onto the threads of each of the Leveling Feet.

Move the Leg Assembly to the desired floor surface working location. Then, firmly tighten all hardware, using an appropriate size wrench not provided. See Figure D. Align the two mounting holes on the each of the two End Braces part 6B with the two mounting holes on each end of the Base part 1G. See Figure D, and Assy. See Figure E, and Assy. Diagram H. To Attach The Front Rail: 1. See Figure F, and Assy.

Blade size 10 in. Certification ETL Depth of cut (in.) /16 in. Horsepower (hp) Maximum cut depth @ 45 deg /16 in. Speed (max) RPM Product Height 12 in. Product Length /4 in. Product Weight 36 lbs. Product Width /8 in. Shipping Weight lb. Table dimensions /8 in. x /8 in. CA Residents Warning - Prop 65 Info/5(8). For any difficulty using this site with a screen reader or because of a disability, please contact us at or cs@www.- . For California consumers: more information about our privacy www.- information about our privacy practices. Harbor Freight buys their top quality tools from the same factories that supply our competitors. We cut out the middleman and pass the savings to you! Inside Track Club; Need Help? Mini Cart. Search. Submit search. Home; Search Results For "Table Saw" 24 Items. NEW. 10 in. 40T General Purpose Miter & Table Saw Blade. 10 in. 40T General.

Powermatic 8 Parallelogram Jointer Stanley Sweetheart Block Plane 05