%!$ Easy Diy Woodworking Bench Plans For You #!@

marking-knife-template-zone The finished product is filled with flaws but damn I'm proud! For a starting point, take a look at production knives that are for specific purposes and gauge what the approximate thickness should be. Thanks to everyone for sharing. Thanks for the patterns! A tip for all European knife marking knife template zone Greetings, and keep up the good work. See the sidebar below for some tips on templats a spokeshave. Alaks, It was always the intention tsmplate the maker Matt Estlea Marking Knife Cost Zone would add his or her own flavor when creating a permanent pattern.

I wanted to ask your opinion on the best way to cut and grid my first knife. I decided on c because of articles I've read about it. Tonight was the start on the project and it quickly ended in frustration. Went through 3 probably cheaper hack saw blades and then tried to grind some of it with my bench grinder. I kept dipping the steel in water to keep it cool but my grinder hardly removed any material at all. I also have a hand grinder but didn't know if that would heat the steel too much. Once it starts to color change in the grind spot, thats getting it too hot?

Thanks for any tips of suggestions you could pass along. Chris, C is pretty tough to work and I'd expect to go through a couple of hacksaw blades, depending on the thickness of material you are working with. Get bi-metal blades, DeWalt ones are fairly good.

To profile my first blades I used some 18 tooth-per-inch blades and a bench grinder with a 'coarse' stone. Yes this does get hot. Just go slow, keep dipping and of course wear some work gloves so you can handle the hot piece. Some guys clamp the steel in a vise and use a disc grinder too. That way you're holding on to the grinder, not the steel. You can finish the profile with a file and get it accurate to your pattern lines.

Once you are done the profile, cut the bevels with a coarse file. Something like a mill bastard file. I used a jig to help guide the file.

As far as getting it too hot, and any heat at this stage generally isn't a big deal as you are going to have the finished blade heat treated after all your grinding, filing and sanding are done. Once the heat treatment is done and the blade is hard, any excess heat at that point will ruin the hardness.

I am learning so much from those guys and they are super helpful. Good luck! Thanks for sharing! Thanks again very useful. Thanks Dan! I think the issue with my bench grinder was the grinding wheel wasn't course enough. Going to get better hacksaw blades and a different bringing wheel today. I've read and watched hours of videos on You Tube about knife making and have learned a ton so far.

Beginner knife maker here, just wondering why you make the knife pattern out of plywood and then trace it on to the steel, I know this is very common and probably necessary in some way that I don't understand but why don't you just trace the pattern onto the steel straight from the printed out pattern?

Hi Hunter, I make the pattern Marking Knife Hock Zone from thin plywood as it's more durable and easier to clamp and trace than paper or cardboard. Both plywood and polycarbonate are easy to shape with sanders and files until they represent a perfected shape. Once made, I can make many copies on to steel. A busy knife maker will make patterns out of steel, where s of knives can be made from the initial pattern.

So it's about durability. Cheers, Dan. Hi, I am going to start selling my knives and was wondering if you mined me using your patterns for commercial use? Alaks, It was always the intention that the maker would add his or her own flavor when creating a permanent pattern. Every aspiring knifemaker will sell a knife sooner or later and that's a great thing. I have no issues with you selling a knife which has it's origins in one of these templates.

Please note that I maintain copyrights on the PDF files and reproducing the files for commercial use requires written permission. Best of luck in your endeavour! This will be a great help as I am just getting started making knifes. Thanks So Much Rudy.

Thanks Rudy. I am trying to document as many knifemaking processes as possible. I am always looking for suggestions. If you think I missed something, please let me know. Dan, What program do you use to draw up your knife patterns? I need to do that with some of my designs so I can save them electronically. I use the Spline and Bezier functions. Once in vector form the image of the knife can be scaled without losing quality.

Best wishes! You got a really useful blog I have been here reading for about an hour. I am a newbie and your success is very much an inspiration for me.

Dan, i've never thought there was such a useful source like this for knife designing. Thanks for time and hardwork Blessing from Italy All the best Ubaldo. Wonderful drawings! Do you have a file zip, rar, etc. Would you be so kind as to help me find them?

Thank you for the suggestion. I do not currently have all the PDFs in one file. I am however working on a database which will allow you to search by style or key words to locate and download a knife pattern. Thanks for posting these. The finished product is filled with flaws but damn I'm proud! How can I send you pictures so that I can fulfill your request for pictures of finished products?

Hi Matt! Sounds awesome. You can send me a pic via email. Thank you so much! I'm going to download all of these. I was breaking my head trying to design a knife and I had basically given up.

But then I finally got to work and designed one, I kept changing things until I had completely changed the look a few times over. I don't think I'll have a problem drawing now but I'll need a backup since I'm not too good at drawing smaller knives. Really appreciate the tips, patterns and ALL the good factual info. Just completed a blade smithing course this summer and hope to build a small forge soon. Your photos and advice are right on.

Glad to see a fellow Canuck who is willing to share the knowledge in an open manner, makes me proud to be Canadian. Thanks Kooter. Thank you so much for all the insightful and helpful tips. I do have one question, I recently came into possession of a few hidden tang? From the point to plunge line their about 8ins. How would attach scales to these? Would you add a weight of some sort to balance the handle and blade?

Normally for hidden tang knives we wouldn't use scales. I would use a block and hollow it out for the tang to fit into.

Then I would glue and pin. If the tang goes all the way though the handle through tang you can attach a butt of say brass or stainless steel.

This would put some weight at the back end to counter a heavy blade. Thanks Dan!! These are perfect templates for what I've been looking for! I'll send you some pics really soon! Hi Dan, the link to the BC4 template appears to be broken?

And many thank's for all the templates. Thanks for the patterns! There is very little truly "free" things on the web anymore. I transferred some to scrap plastic laminate I had in the shop, formed it with the 2X72 and now have thin, durable patterns.

Thanks again and will send some pictures once my work becomes worthy. Thanks Mark. Giving is the way to ensure we always have plenty. Please let me know how your knives turn out. They are always super rewarding! I get steel from Canadian Knifemaker Supply. I heat treat myself in my shop. For heat treatment, try someone local first. Thank you so much for these!!! Hey was wondering if your email was full. Tried sending some pics of my first knife but kept getting a bounce back. Hi I'm thinking of making a small knife my dad could use to skim small game like rabbit, any suggestions on the design i should use?

I really appreciate people like you giving people that want to start out, a resource such as this one;] thanks! Take a paring knife as a starting point. Hi DanCom, First of all, i love your blog!

It has a lot of useful info and the knife patterns are awesome. I based my first knife on the BK-2 template. It was quite an adventure, it took me a couple of months to finish, but I am very happy with the result. Therefor I got my supplies from 'www. A tip for all European knife makers Greetings, and keep up the good work. Vincent Belgium. Hey DanCom, I was wondering if you had any templates of camping knives with a bottle opener at the bottom?

Thank you! I do not as of yet. But seeing that they are increasing in popularity I could come up with something. What ever happened to the twist-off cap?

I'm starting out making my first knife and I'll be using a design from above. It's gonna be kick ass. Right on! I'd love to see how it turns out. I am afraid you will become addicted to knifemaking. Hi there im starting to make knives and i was wondering what program you use to make these wonderful templates thanks tate.

Hi, I use a couple of programs. As long as the software is capable of making "vector drawings" then it's worthwhile using. I have a post and video on using OpenOffice Draw. I've been using your knife patterns for quite some time. I wanted to say thank you for such a great resource and to show you a blade I made recently using your BC2 pattern.

Andrew, That is one very handsome knife and sheath. I would like to add the photo below. Thanks for commenting. Hello dan, I used one of your template,s , and now i,m supposed to send you a picture of the finished knife, but i can,t find a email adres to send it to Greetings Gerben The netherlands.

I just came across your site. Truly amazing for you to share all this information. Deeply grateful as I struggle with design more than with making. Focus on the making part. Your designs will come out of that.

Thanks man, Keep on it. Send a pic. Hey Dan great site thanks for the patterns. Here is one i just finished based on the 1LZ pattern. Feel free to add it to the site. Awesome knife templates. Is there an HT2 design? If someone says God Bless, they are just hoping you receive blessings. If you want to consider is free Karma then so be it. In the end they are simply being nice and hope that good things come your way.

Thank you very much! I really appreciated your video. Japanese masters are abe to make great things with very simple tools. Question 2 years ago on Step 5. As these are for wood carving would it make sense to grind one blank with a left bevel and the other with a right? Answer 2 years ago. Reply 3 years ago. Thank you very much for sharing this, I am going to attempt making some for my brother this year as for a Christmas present he is mad for all things Japanese.

I will post some pictures in November if I am successful :D Just 1 quick question you mentioned you heated the blades to degrees, did you do this with the same home made furnace that you used to create the dimpled effect earlier in the video?

Thanks again Chris. I tried my hand at making a few knives when I was in my gunsmithing phase of my life, a couple turned out passable, one with real stag handles and one using walnut from an old gunstock. For steel, I used old files that had passed their use by date and no longer filed as well as they should have. It was great fun but when my blasted belt sander broke free from it's stand, and I Marking Knife Template Windows 10 did the natural thing and tried to grab a running belt sander to keep it from crashing into the floor.

Man what a mess my right hand was; really messed up my day and put an end to my knife building days. My hand did eventually heal up, and you can't even see the scars any more, but I gotta tell you, that year when I wet to qualify with my hand gun, shooting left handed worked but I didn't get my normal average, instead of tying for the top where I usually did, I nearly tied for low score. That said, I am now stronger then ever in the weak hand portion of qualification.

One thing I learnt in my early twenties is to never try to catch a flying jigsaw. When cutting out a laminate worktop for a glass kitchen hob I lifted the jigsaw when the blade was still active. The jig saw blade just nicked the work top and flew forward. Instinctively I went to stop it with the left hand, but cut through the leather glove I was wearing right through to the bone on my wedding ring finger. Rule number 1 if anything can cut and its moving treat it safely as it will always find skin and bone.

As he brought forth a real Hazzard I would suggest using a foot pedal switch for the sander that way if the sander breaks away as his did you step off the foot switch and the power is turned off!! When a heavy object that you own falls in your proximity, you no longer own it until it is stopped on the ground, it owns you. I work with glass and knives - never, ever catch a falling sharp or buzzing thing. I grabbed a piece of falling plate glass I was working on and let go immediately - my fingers were sliced to the tendons, but did not actually touch the tendons.

It scared me spit-less but I learned; now, as soon as something begins to fall, I step back and let gravity take its course. Is a beautiful job and need a lot of patience I imagine the Samurai maker congratulations and God bless,. More by the author:. About: I am an industrial designer and a maker. I like to make prototypes, unique pieces, equipment and other stuff. Translated to English, 'kiridashi' means 'to carve out' in Japanese.

Here you can see some shots of the finished knives. Thank you for checking out this build. Did you make this project? Share it with us! I Made It! Incredible Wooden Spirals by rschoenm in Woodworking.

Telescope Setting Circles by instgct in Science. Moats Custom Woodworking Question 2 years ago. Answer Upvote. Ninzerbean 2 years ago. Reply Upvote. Guido Vrola Design Ninzerbean Reply 2 years ago. Ninzerbean Guido Vrola Design Reply 2 years ago. Guido Vrola Design ventifact Answer 2 years ago. As Weish said, you need the other bevel orientation if you are lefthanded.

But only in that case. ZeRandomMan 3 years ago. I agree, I think these knives will do great with a crowdfunding campaign :.

Using A Router Round Over Bit Key Best Variable Speed Wood Lathe Key