%!$ Easy Diy Woodworking Bench Plans For You #!@

ridgid-r4512-router-table-ui Ryobi BT table saw with router table attachment. This is the way to go! Put it all together and didnt need any allignment at all. Between the last pic and this next one the saw needed to be flipped on its stand. So I ended up getting the R on sale.

It's a great way to add a rock solid router table to the saw. I also installed a Woodpeckers router lift to hold the Porter Cable router. Rock solid, easy to install. This is the way to go! Re: Router Table for R Holy crap! I took some pics of the v switch setup I made for the vac and router, and it shows some of the mounting of the extention table, I used bolts,nuts and washers. The blue cord is v, the yellow is v.

The router table insert is still a work in progress, I need to make it longer. It fastens to the cast iron saw table; you do have to remove your wood extension, and the steel extension, as well.

I put a small table under the saw with some scrap wood to achieve the correct height, then put the Bench Dog extension on that stack, which held it up for me to start the fasteners. The correct fasteners came with the Bench Dog.

Once in place, I installed a WoodPeckers router lift, and used the leveling screws to level the router lift to the Bench Dog table. Considering I had never used a router table, or a router lift, or a monster bit before, the installation went very well. I also installed a router switch onto the table extension rail so I can turn on the router, and dust collection, from above rather than below. Admittedly, I have NOT successfully made a lock miter joint yet. It is sweeeeet. That Porter cable is a nice addition.

Can someone take pics of how they attached their shop-made extension? I dont have a problem drilling out the rear track or the spreader bar, but cant figure out attachment to the front rail?

I built a router table into my R using MDF. When I get home, I can post some more showing my custom power switch for the Ridgid R router I used and how I mounted the whole thing in the frame.

Thanks, might be picking this up in the near future. I like your new table saw. The Jet is old but very good still. The Rigid came out of the box square and parallel.

What did you do with your Porter Cable? Thanks for posting this info. Currently I have an old Craftsman inherited from my grandfather but the fence is complete garbage. I too have the same question. Nice looking saw, Jay. I have a 10 yr old Rigid TS that has seen better days. Congrats on the new saw! I Ridgid R4512 Router Table Insert Over like your new saw, I too just purchased a new table saw but I ended up getting the craftsman 10 inch contractor saw.

I really like it. Great saw! I purchased mine about the same time you did. I built an outfeed and router table for mine.

Ugh Jay that sucks! Thanks jay. I bought the same saw last week. I love it. I rubbed most of it out with Simple Green. Jay, sorry to hear you have the blade alignment issues. Raising and lowering the blade on mine shifts it by less than. Guess I got lucky or not unlucky. The weight of the motor bends a mount. IF you get one that runs true. I have it setup but still tuning it.

I did notice that the blade was out of alignment. I worked on it some but still have to tweak it some more. They made that awesome band saw you have. Then you can make a hot dog video to test the saw stop out! That would be cool! Hi Jay, Thanks for sharing your experience with us. Looking forward to your next saw. Hope it works better. I have owned this saw for a year. I called and came up with about a month of craziness. I decided to deal with it myself.

I had to take the trunnions out and grind them. Everything is dead on Ridgid R4512 Router Table Insert Queue and wonderful since that point. Hope your second attempt at a new saw will be much better. I can relate to space issues, as I moved my shop from a 2 car garage to a one car garage about a year ago. Now trying to decide if I can part with my radial arm saw because of space issues.

Tough decisions. Good luck on you endeavors. Man that stinks. I think there is a delta saw in about that price point. What better tools at an affordable price. Jay — I noticed that you are using your kitchen as a woodshop. I made sure I showed my wife this in hopes that she would relent and let me do the same but to no avail she told me hell no.

It may not actually be the alignment but the laser. I have not had a chance to do a proper alignment yet but the instructions state that it should be factory aligned. Well to follow up my previous post about my new R — i have tuned it up and mad a few cuts made a sled and some shop stuff. I have heard tales of people getting this saw and having issues — and then those who get one and have none. Jay — what have you done with the saw? Did you return it or did you finally tune it?

So far I have had no issues with it apart from popping the breakers once. Sorry to hear you had issues. I bought the same one in November. Put it all together and didnt need any allignment at all.

Everything was dead square. No issues with the blade moving either. I guess I got lucky. The only thing I dont like is the fence. I cant figure out why or how to adjust it. Looks like this is a mixed bag table saw — some of us get lemons and some peaches. The fence is pretty nice for a stock fence in this price range. Jay, I bought this same saw about eight months ago.

Thanks for giving me a simple and straightforward intro on how to correct these minor problems. Thanx for the info. I have had this saw for about 3 years I generally I like it. Over time I have found a few things that really irritate me about it. Overall it has a decent amount of power, but I really have to slow down when cutting hard woods might be a little due to my blade.

The two major stones I have to throw are about the fence and the insert area. Adds stability and convenience to Routing and Sabre Ridgid R4512 Router Table Insert Youtube Saw operations. Mounts to any work surface bench, workmate, etc. Ryobi BT table saw with router table attachment. The fence locks down right and square. Router is included. Up for sale is a gently used Delta table saw bought from Lowes a couple years back.

I added a router table and a removable fence that works great. Includes extra rails to extend for wide cuts, can be propped up with saw horses. Rails included with saw. Selling the router with the saw since mounting holes match. I'll include the router case and parts if needed. This saw came with a built in miter sled as shown in the pictures.

Father-in-law's tools that had been stored for the grandkids. It is in the original box and has never been used. It is in perfect condition. Cash Only. The saw does not suffer the alignment issue known on many of these see more info below.

This setup allows for over the table height adjustment using the supplied allen wrench, like a router lift. Craftsman 10" table saw, craftsman router , router bits, wood lathe tools, black and decker work bench.

Lathe Tools Princess Auto 800 Marking Knife Material Group Small Handheld Saw For Wood 45 Laser Wood Carving Machine Manufacturers Tab