Futon Plans Wood Magazine Jp,Wood Plant Name,Diy Wood Reindeer Pattern With Reference Vector - Review
Using the 21xinch piece, draw a center line creating two, Begin at one end of your center line and lay out a groove, one inch wide and eleven inches long. Using the 27xinch piece, draw rounded corners on the two corners on the same inch side, using a pencil and a jar lid.
Along the opposite inch side, mark the center point, and the points inches from each end. Repeat this exact layout with the second sheet of plywood. Lay out 4 inch long pieces out of the 2x2-inch lumber. Cut out all the straight cuts with a skill saw and round the corners with a jig saw. Tune up the edges with a file and sand paper. Make multiple passes with Futon Plans Wood Magazine Kr the skill saw to create the 1-inch groove.
Begin with the two 21xinch pieces, and the 21xinch pieces of plywood. Using corner butt joints, assemble a frame inches tall, inches wide, and inches long.
Secure the corners with the 2x2-inch blocks and screws. Use the 21xinch pieces. Insert a groove into the other, creating an X with the 2 pieces of plywood.
Place the X, face up, in the center of the base. The X should be inches tall. Create a 54xinch platform by screwing the two remaining pieces of plywood together with door hinges. Center the hinges over the center mark and the marks inches in from the edge. Place the platform either flat over the base, or folded with the back leaning against a wall. This platform futon frame is low cost, light weight and portable.
It can be used as a bed or a couch. We welcome your comments and suggestions. All information is provided "AS IS. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use.
View our Privacy Policy here. Toggle navigation subscribe. Written by Doityourself Staff. What You'll Need. Chalk box. Tape measure. Saw horses. Jar lid. Skill saw. Jig saw. We may receive commission when you use our affiliate links. However, this does not impact our recommendations. Since you are an affiliate, you can use this url to link people to this page and get credited for it:.
Tier Standard Premium unavailable Learn more about our premium plans. Premium Files You can download the additional shop drawings that you purchased using the link in this box. What You Get: 8 printable digital pages of step-by-step instructions. Over 30 full-color photos and illustrations.
A pattern for the template used to cut the grooves for the knock-down hardware. Product Recommendations We don't have any links to project supplies and hardware for this particular project yet, but here are some other products that might be of interest to you.
Best Wood Burning Fireplace Tools Windows Small Wooden Mallet Hammer Lyrics Best Rap 2002 Mini 3d Wood Carving Machine On |
HIP_HOP_E_MIR
01.04.2021 at 21:16:37
Naile
01.04.2021 at 19:16:23
itirilmish_sevgi
01.04.2021 at 15:43:16
noqte
01.04.2021 at 23:55:55