%!$ Easy Diy Woodworking Bench Plans For You #!@

build-a-mirror-frame-with-molding-knife How to Frame a Mirror with Clips in 5 easy steps

How to create a handsome looking glass build a mirror frame with molding knife fluted casing and corner blocks. Designers and decorators often use mirrors and reflective surfaces to add depth to narrow and small areas.

A strategically placed mirror in a hallway or on the far wall of a cozy office can visually open the room, but the style and size of the mirror itself are just as important as where it goes. Unfortunately, a large molding-framed mirror can set you back hundreds or even thousands of dollars. It doesn't have to, though. To show you how to create a fresh yet traditional-looking mirror that won't shatter your budget, This Old House general contractor Tom Silva pulled corner blocks and fluted casing, a precut mirror, and some sturdy mounting materials from the aisles of a home center.

Scaling up the design wouldn't cost you much more. Read on to see how he converts off-the-shelf items into a savvy addition to tight spaces.

Download the illustration and cut list for this mirror project. To size the plywood mounting board, add the casing widths to your mirror's dimensions and subtract 1 inch from each side.

The casings, resting flush on hardboard spacers, will overlap the mirror on their inside edges. Use a circular saw to cut the plywood and hardboard. Position the mirror and spacers on the plywood so that the spacers are flush with the plywood's perimeter. Apply wood glue to the hardboard strips and clamp them in place.

Apply mirror glue to the back of the build a mirror frame with molding knife in a zigzag pattern, and nestle it inside the hardboard strips. The hardboard strips should lie flush with the surface of the mirror and create an even plane for the molding to be installed.

Set the blocks at the corners of the frame so that the outer edges extend slightly—and equally—beyond frane plywood and the inside corners overhang the build a mirror frame with molding knife. Glue and nail the blocks in place through the plywood, being careful not to nail into the mirror. Cut the fluted pieces to fit between the corner blocks, and set them in place overhanging the mirror by 1 inch.

Glue, clamp, builld nail the moldings to the assembly through the hardboard and plywood. Plug the fastener holes with wood filler, then sand and paint the frame. By Jennifer Stimpson. Pinterest Email Pocket Flipboard. Weber To size the plywood mounting board, add the casing widths to your mirror's dimensions mplding subtract 1 inch from each side.

Weber Apply wood build a mirror frame with molding knife to the hardboard strips and clamp them in place. Weber Set the blocks at the corners of the frame so that the outer edges extend slightly—and equally—beyond the mirror and the Build A Mirror Frame With Molding Light inside corners overhang the mirror. Weber Cut the fluted pieces to fit between the corner blocks, and set them in place overhanging the mirror by 1 inch. Email required. By signing up, you agree to our Privacy Notice and European users agree to mirroor data transfer policy.

Lathe Tools Ontario Uk Farmhouse Table With Turned Legs Plans Ivy Square Woodworking Corp App