%!$ Easy Diy Woodworking Bench Plans For You #!@

benchtop-bandsaw-reviews-2019-note An agricultural machinery partner with great service and great value. Over-reliance on postemergence herbicides, along with soil disturbance bringing viable weed seeds to the surface, and a primarily benchtop bandsaw reviews 2019 note rotation focused on winter crops, had led to high black-grass levels. But particularly careful consideration needs to be given to ground where permanent grass dominated before the food production drive of WWII, often in lower lying areas and without drainage systems. We Also new to the RL is applied two plant winter barley Bolton — one of the first varieties to growth regulators PGRs in mid-April and early May come through the Elsoms Ackermann breeding respectively, benchtop bandsaw reviews 2019 note stop the crop necking but, overall, program, aimed at providing the UK market with there were very few other concerns. Question about the router table.

Dick Neale from Hutchinsons demonstrates how a good soil structure on the Claydon farm allows water to quickly drain down through the soil without surface ponding. Great yields begin with a high-quality seedbed The Kelly Tillage System is a unique tillage tool designed by farmers, for farmers.

Using shallow-tillage technology, the System enables farmers to create a better foundation for their crops by removing small weeds while keeping precious moisture in the soil profile. This is performed by the ground-engaging Kelly Disc Chains, such as CL1 and K4 Disc Chain options, which are proven to be highly effective against weeds, including the herbicide-resistant varieties and in tougher soil conditions, the company says.

Preserved moisture in the soil, along with a uniform seedbed, allow farmers to better establish their crops, resulting in an increased yield. An additional benefit which also results in an improved yield is effective weed control. Herbicide methods are proving less effective as time goes by, which calls for better solution-. This is highly beneficial for spring planting.

Farmers can be confident that only the topsoil is disturbed, leaving the soil underneath untouched and preserved, creating a perfect starting platform for planting.

This ultimately results in creating a higher quality seedbed for an improved bottom line. Kelly says it stands by its commitment to providing farmers with an efficient solution to a perfect seedbed, all the while achieving practical weed control as well as promoting soil health advantages. Achieving effective weed control while maintaining soil health has never been more imperative for UK farmers. While there is no perfect balance between applications, there is always the possibility to control the outcome of future yields through effectual shallow-tillage methods.

Available in a shear bolt protected four- or six-tine configuration, the 3m mounted Awemak Atom Gt subsoiler bar, available from PFC, gives the ability to loosen soil to a depth of mm with its Hardox steel tips, while its integrated linkage allows it to either be used independently or with a linkage-mounted following cultivator.

To maximize the versatility, PFC suggests adding the Ares BTX30 discs, fitted with legs protected by rubber suspension bushes as standard. According to the company, the standard large circumference discs work well in heavy trash and chopped straw loading, but are equally suited for shallow. A number of standard features make the Ares BTX stand out, such as hydraulic working depth adjustment, active side screens, straw distribution tines and disc deflector boards for a level finish, and LED road lighting.

For further information and onfarm pricing, visit www. It is always better to wait for optimum seedbed conditions. The optimum sowing date for spring OSR is from mid-March to mid-April, with a firm but moist seedbed being the aim, he points out.

Ideally, you should be aiming for between 60— 80 seeds per m2 but this will depend on soil conditions and sowing date. Management differences Sarah Hawthorne, of seed breeder DSV, says there are also differences in management when it comes to crop nutrition. Spring beans The area of spring beans sown in the UK is likely to be high again in , following the exceptionally wet autumn in The yield of certified seed crops was adversely affected in by the hot, dry summer.

To make things worse, many certified seed crops of spring beans had to be rejected due to low germination. When using farm-saved spring beans, it is advisable to get them tested first.

The key tests are germination, stem nematode, ascochyta and thousand grain weight. Bean seed is often lower in germination than cereals — typically 80—90 per cent. This is usually acceptable for bean seed, as seed rates can be raised to off-set this. The sample should be free of stem nematode and ascochyta. Stem nematode can infect the soil, sometimes for over 10 years from infected seed, so a zero tolerance is advised here.

Some farmers may be tempted to drill spring beans straight out of the barn. However, it is vital to check that the sample is clean enough when considering this. Closer inspection often shows up a range of problems that need to be addressed. These include bits of pod, small seeds, broken seeds, diseased seeds, weed seeds and even bits of wood, stone and metal. These can cause problems in the drill, resulting in uneven establishment. Most spring bean seed is traditionally sown without a seed treatment.

However, most growers who are using seed treatments that contain phosphites and trace elements are getting higher and more reliable yields. The best crops of spring beans usually come from early sowing, as long as soil conditions are suitable to do so. Field peas The area of spring sown peas is relatively stable, but it might see an increase this spring as growers look for an alternative, profitable break crop.

When farm-saving pea seed, it is advisable to get the seed tested first. The key things to test for here are germination, ascochyta and thousand grain weight. Peas are usually grown for premium markets, often for human consumption. A good yield of high quality is key to profitability with peas,. Where farmers are growing a variety that is susceptible to downy mildew, it is well worth using Wakil XL seed treatment to get the peas off to a good start.

Products containing thiram have been withdrawn from use, so we no longer have a cheap fungicide to use as a seed treatment on peas. Products containing phosphites and trace elements especially manganese, are useful to help get peas off to start. Peas are best sown into a good seedbed when temperatures are rising in the spring.

Peas have a short growing season, and seedbed conditions are important to avoid growth being checked by adverse conditions. Quality Seed Sourced from your farm Processed to your standard Ready when you are. Three new varieties pass tough test According to Elsoms Seeds vining pea and combinable crop manager, George Goodwin, the future varieties pipeline looks strong. New winter wheat varieties Merit and Astound, along with winter barley Bolton, all performed yellow mosaic virus BYMV resistant impressively during a very and is suitable for both heavy and challenging growing season, light land.

Following our recent comments Mr Goodwin right , on success with Jordan, the launch of behalf of the UK breeder. Both work drilling dates, yielded per cent of controls in closely with farmer Peter Hewson of recent trials, and displayed excellent standing Wold Newton Farm, near Market Rasen, ability and lodging resistance in both treated who trialled both varieties.

Overall disease scores Despite the tough agronomic challenge of a were good, with a 6. With a consistent and attractive of the driest springs on record, the two profile, it should provide stern competition to both agronomists agree that the varieties Gravity and Graham. With a high untreated yield, good septoria 23rd October, we were not able to get resistance at 6.

Mr Goodwin. We Also new to the RL is applied two plant winter barley Bolton — one of the first varieties to growth regulators PGRs in mid-April and early May come through the Elsoms Ackermann breeding respectively, to stop the crop necking but, overall, program, aimed at providing the UK market with there were very few other concerns. It offers a good balance between get the crop through and were rewarded with a high yield and good disease resistance, it is barley very clean crop with no lodging.

Bolton yielded. Final yield was excellent in view of the extreme weather and early grain samples showed a high quality, bold grain. The variety looked robust and showed no susceptibility to either rust or septoria — although admittedly this year was not a high septoria risk year. FG February www. After establishment, the most important factor for achieving high yield potential is high final tiller or ear counts.

Arable technical manager for Limagrain, Ron Granger revisits the key agronomic principles for the best establishment of the barley crop, and for maintaining high tiller counts for optimal yields. Choose the right variety Variety choice is usually determined by the end-use or contract chosen. Higher yielding varieties such as LG Diablo can offer a significant yield advantage. Newer malting varieties can also offer equivalent or better yield potential than many standard feed varieties.

This, in combination with rising soil and air temperatures, will ensure rapid. Limagrain work shows that earlier drilling in the spring encourages higher yield potential but this is mainly on lighter, free draining land that will dry and warm up faster than heavier, wetter soil types. Drilling early significantly increases the risk of disease, so choose varieties with strong disease resistance. This approach produced higher yields, without exceeding grain nitrogen percentage. Additional nitrogen input appears to be beneficial on the better soil types, but take care on lighter soils that are more prone to stress.

Higher-yielding varieties respond well to the higher nitrogen levels, as. Macronutrients such as phosphate, potash, magnesium and sulphur, have proved to be beneficial applied either in the seedbed or soon after drilling, to promote strong rooting and early plant growth. Manganese, zinc, copper, iron and boron, applied at the stem extension phase of growth into flowering, also help to ensure a healthy canopy and good ear fertility.

Tissue analysis of the young growing crop is useful for indicating shortfalls in nutrition and is relatively inexpensive if targeting a very high yielding crop. Early PGR applications are recommended on thick crops to promote additional rooting and strong uniform tillering. A minimum of two fungicide programmes should also be considered to maintain tiller number and keep the plant healthy. Soya UK have a ready market for 20, tonnes at these prices.

We invite all arable growers to consider growing with us in New varieties with the best yields, bean quality and early harvesting dates. Agronomy advice and grower support offered throughout the season. Pre-inoculated seed means all seed is delivered ready to use. We now have a good range of effective, low-cost herbicides for both broad-leaved and grass weed control. No major pests or diseases. THE X7. What if you could pair productivity boosting technology, a great-looking, comfortable housing, a hp continuous variable transmission and fleet level remote diagnostics?

Well, meet the X7. Book a demo today at tryitwedareyou. Precision technology specialist appoints two new UK resellers Farmers now have access to more localised precision farming support, with the appointment of two new Trimble resellers, covering East Anglia and northern England.

In the north, Manterra has specialised in SymAgri began covering Norfolk, Suffolk, precision agriculture for over a decade. Mr Tew added. We will give your tractor a full GPS maintenance and data check. Business users only. Offer ends 31st March , subject to availability. Subject to acceptance and affordability checks.

Applicant must be 18 or over. Offer extended to 31st March , subject to availability. Available on new equipment only.

Hourly payment profile is not available and is shown for illustration purposes only. The finance product offered under this promotion is Hire Purchase.

You will own the machine when all payment have been made. Alternative finance options are available. Warranty conditions apply, extended warranty for years 2,3 and 4 up to hours per annum.

Terms and Conditions apply. Images are for illustrative purposes only. Registered in England No: Case study: Improvement of crop drying facilities In November , Tey Farm Systems was asked to convert an existing building with low volume ventilation into an on-floor drying system for a client in South Essex. The improvement work involved. The company replaced paper filing with digital systems and created new videos for many of its products.

By the end of , SPA was working hard towards the Brexit deadline, making sure it had plenty of stock to allow for any delays in shipping come January Import and export of machines and spare parts have been an experiment so far, with varied results in both transit time and cost, but nothing too much of a problem to date The very late Brexit deal left a lot of questions unanswered until the last minute, but we are confident that the transport will settle down once the new systems are understood by everybody.

Tey Farms had to replace the rotten galvanised panels with concrete grain walling and erect a new lean-to fan house. The customer was decommissioning another store on the farm, so having fully refurbished the old fans, Mr Fairs and his team moved these to the new store along with the modulating burners. In spite of the onset of Covid, Tey Farms was delighted to still complete on time and on budget for the client.

Tel: Email: ask opico. As a designer, manufacturer and distributor of agricultural equipment and replacement parts, making sure our products at AGCO continue to get to our customers as and when they need them is our top priority. And, with a large nonproduction footprint in the UK with circa staff covering everything from sales and aftersales in the UK and Ireland, through to finance, legal and IT, we knew we had to be ready for the new rules from January Transition preparations have gone well considering the many facets of a company of our size, with communication and early planning key to a successful execution.

We saw this as a challenge and, while there were stumbling blocks, the logistics were fairly straightforward, and. AGCO found workarounds to keep products and customer support flowing. Check out the government resources that are in place to support your business at the gov. Find out more online at gov. The next few months may see challenges as everyone adapts to the new rules but, as a company and for agriculture as a whole, we remain optimistic.

Farming is one of the most passionate, sustainable and hardworking sectors, and we have a chance to reflect, gather our thoughts and move on to better things if everyone works together. There will be barriers, but this is an opportunity to make big decisions for ourselves.

So, get informed about the effects the new rules will have on your business. Take on expert advice and put plans in place. The agricultural industry under our new relationship with the EU will be as good as we within the agricultural industry make it. AGCO is a global leader in the design, manufacture and distribution of agricultural solutions, delivering high-tech solutions for farmers through our equipment and related services.

A range of drag hose couplings and adaptors for a fail safe operation of liquid manure application. Adaptors for all solutions. Fully adapted swivelling pull coupler. Repair kits for all pipe sizes. For more information contact your local depot www. The Kramer KL Best for the job A Bedfordshire-based tree supplier which has relied on Kramer handlers for more than 21 years has recently invested in its sixth machine.

David Williams reports. Deepdale Trees started trading in and moved to its current base at Potton, near Sandy, two years later. The business specialises in supply of semi-mature ornamental trees from approximately 2—13m tall. More than varieties are stocked, and the site includes 20ha of field-grown trees, and 22ha of container-grown trees and multi stems. Customers range from private landowners, landscaping companies and garden designers including RHS shows, and the trees are sold for establishment anywhere in the UK and in Europe.

Real workhorses A fleet of four Kramer handlers includes two models — capable of lifting 2t, plus a compact which lifts 1. Kramer loaders are the real workhorses.

I asked the advice of the Yorkshire dealer regarding which machine we should purchase and he suggested the KL Kramer KL Since its arrival, the KL Asked whether additional Kramer machines will be purchased in future, Andrew confirmed that this is likely. We also run tractors and other machinery and prefer to add to our fleet rather than trade in for extra flexibility. Our two Kramer models are seven and eight years old and remain reliable despite having worked more than hours each per year, but they were showing their age which is why the latest machine was purchased.

We are more than happy with the KL High workload The Kramer handlers work approximately — hours per year. The Kramers are extremely stable, have plenty of power and are comfortable and the latest machine is excellent. It has a 30kph transmission which saves time and fuel moving around the site and the air suspension seat ensures a smooth ride.

Ben Burgess area sales manager Rebecca Harris says that Kramer telehandlers and loaders are ideally suited to a wide range of applications in her trading area.

David Williams tried it out. Impressive statistics demonstrate that the all-new Defender, launched in , offers even better go-anywhere capability, but is it too shiny and smart now for a traditional farming role?

Looking from the rear at the back of the vehicle, the roof line is. The interior is well designed, but some aspects of its appearance are pretentious. There is a useful full-width grab handle just below the windscreen, but this obscures vents directly behind.

Power and performance The 4-cylinder, 2-litre engine is excellent. Fuel economy averaged 32mpg including travel on motorways and at lower speeds on minor roads and farm tracks. There was always plenty of power and the engine was quiet. An 8-speed automatic transmission is standard, and gear continued over….

Comfort and handling Adjustable air suspension allows the vehicle to be lowered for entering and exiting, and extra-high ride height is available for wading and extreme offroading.

Combined with a coil spring arrangement, the suspension works well — the ride was firm but comfortable and the vehicle was extremely surefooted and felt stable on twisty roads. The test vehicle lacked the luxury seating of flagship-specification versions, but the seats were firm and comfortable, and easy to keep clean.

Unlike the previous Defenders, there was lots of legroom for a tall driver, and plenty of elbow room too. The turning radius is as tight as most cars, and the steering is light and predictable. Parking in tight spaces is no longer a problem. The engine and transmission are quiet but the absence of wind noise even at high speeds was especially impressive. The test vehicle, with its 4-cylinder engine appeared noticeably quieter than the latest 6-cylinder Discovery 5 models, and just as comfortable.

Optional Terrain Response 2 was fitted to the test vehicle, allowing the driver to select driving set-up modes from deep ruts to slippery grass and snow. It also has a low range which is ideal for tricky conditions and steep slopes as well as Hill Descent Control. However, although all the modes were selected and tried, automatic mode - allowing the vehicle to choose the best settings for itself, was always adequate. It is also less convenient than a horizontal opening split tailgate for loading heavy items from pallets as there is only space to handle from one side.

A useful feature is adjustable rear suspension. Using a button inside the rear door, the loading height can be reduced, and it also makes it easy to connect a trailer as the towbar height can be raised and lowered to match the hitch. Verdict The new Defender impressed throughout the test week, with its comfort, practicality and general appeal.

The low noise level was a performance highlight, and with the. It is smarter and more stylish than its predecessor, so farmyard scrapes and dents will show up easily, but the inside is practical and hard wearing and surfaces are easy to wipe clean. Only 3-litre, 6-cylinder engines will be available once stock of models is exhausted, but the 4-cylinder version tested was powerful and refined.

For those trading in the previous Defender the latest version is a logical upgrade, but we would also suggest it as an option for current Discovery owners as it offers similar comfort and accommodation, but added practicality.

Practicality The rear seats fold to create a flat load area 1,mm long. The side-hinged rear door opens wide, but access is. Choose your next tractor from our full range, extending from hp.

Alex Green Farm Business Manager, Habton Farms Despite the inconsistent rainfall we experienced through August, we were able to put Ferobide to the test in a variety of conditions and soil types ahead of winter cropping. We are mainly using Ferobide alongside our Sumo Trio 4, on either winged Concorde points or low-disturbance points depending on the land type and application.

I feel the flexibility of the Ferobide has been the key selling point for us in terms of being proactive rather than reactive where metal is wearing at different depths. The majority of the Ferobide is welded in the shin and wings and will typically last a whole season on mainly heavy clay soils at around 8 inches deep.

Proud to be a British Farmer. Many UK farmers are benefiting from using Ferobide weldable tungsten. To find out how much Ferobide can cut wearing metal costs and downtime on your farm please call or email stewart. Suitable for grain, silage and general purpose haulage. Improve moisture management in bales for season PFC reckons its CropSaver 7 Series application equipment is the ultimate tool to assist your baling operation.

Spraying a red or blue food grade colour when the operator defined alarm point is reached, bales are easily identified and can be separated for storage. The third piece in the puzzle is the fully automatic application system. The new 7 series CropSaver system is fully integrated with the BigBaler. CropSaver preservative is safe for the baler at pH6. CropSaver allows hay and straw to be baled safely up to 27 per cent for the BigBaler and 30 per cent for the round and conventional baler.

Post driver helps to redefine boundaries Ceres has launched a striking new range of Post Drivers for both tractors and telehandlers, as well as for diggers. The Ceres Striker Post Driver is an extremely capable and precise post knocker, the company says.

It features a powerful kg free-falling hammer, operated by the unique three-pulley system, which allows superior hammer acceleration while simultaneously keeping a balanced and even load on the extending mast. The marine double braid 22mm rope, combined with the lightweight pulleys with central bearings,. The extending mast gives the hammer ample space above the post cap, even when the post cap is fully raised, with other benefits being a lower centre of gravity and reduced height for transport, as well as giving.

All of the above advantages give the Striker the ability to drive posts through hardcore and tree roots with ease, in many cases without the need for a rock spike — saving time and reducing costs. These benefits make this powerful machine ideal for construction, farmers, forestry, maintenance teams, contractors and more.

The TT model, to suit both tractor and telehandler, offers the option of low ground pressure and quick and easy transport for tractor use or the versatility of telehandler operation,. The TT is also suitable for use with a loading shovel. The DG model is designed for use with both degree and degree diggers, from 5—13t, giving it the ability to get into the most challenging areas and environments, and providing the operator with far greater power and accuracy than attempting to unsafely push or hammer posts in with a bucket.

Ceres therefore states the Striker is a costeffective way to take advantage of the precision and manoeuvrability of your machine, to achieve a professional and high-quality finish.

An inter-plant weeder with manual control has revolutionised pumpkin weeding for a large Wiltshire grower. Vegetables are grown on site including organic sugar snaps, courgettes, runner beans, French beans and sweetcorn, most of which are sold to vegetable box distributers.

Squash are supplied through a wholesaler to markets and restaurants in London. Avoiding herbicides Approximately , pumpkins are grown each year, and ensuring they remain in peak condition means the growing area has to be kept weed-free. Labour intensive Hand hoeing was time consuming, and the average work rate for a team of 12 people was approximately 1.

Jono considered purchasing a robotic weeder, but this was impractical for several reasons. But pumpkins are planted a metre apart and we only have a single crop with a growing season of four months, so we had to find a cheaper solution.

Spapperi weeders continued over…. The easy to operate 22 to hp compact range delivers great choice, performance and value, getting the day-to-day jobs done headache-free. An agricultural machinery partner with great service and great value. Great Choice.

Great Performance. Great Value. Images shown for illustration only. Carried on a toolbar, each weeder module consists of a pair of hydraulic-driven rotary weeding heads mounted side-by-side, and controlled by an operator seated at the rear.

The two heads pass either side of the plant row, and the operator uses a handcontrolled hydraulic linkage. Jono was so impressed that he ordered a two-module version in time for the growing season, without needing to look at other options. We have two operators who work together on it most of the time, and they achieve very accurate performance. Rather than miss weeds, I would rather see the odd pumpkin removed accidentally, as that means the operators are working as close as they can to the plants.

I always allow for losses when seeding the crop, so that we know we have enough to supply our regular customers. Reduced labour Jono said that the work rate achieved by two operators on the weeder plus a tractor driver is 1.

No electronics The Spaperri weeder design is simple and Jono said a big attraction is the lack of electronics and computer software. There is very little maintenance apart from routine greasing, and the ground engaging tines are cheap but last well — Jono estimates that three sets will last two seasons. Whatever the state of the potato market, rely on David Harrison to have the handling solutions to meet your needs.

Bomford Hawk 6. Versatile new models for dairy, livestock and arable sector Massey Ferguson recently announced the introduction of five new models from —hp in the MF 5S Series. With superb visibility and an impressive 4m turning radius, Massey Ferguson states this new series are supreme loader tractors, while an improved payload and higher linkage capacity make them powerful performers in the field and on the road. All models are equipped with 4-cyl engines, offering maximum powers from hp up to a new range-topping hp model.

There is a choice of three levels of specification — Essential, Efficient and Exclusive. With its compact dimensions, 2. All models can be supplied loader ready, or now come equipped with a factory-fitted loader from the Massey Ferguson. MF FL Series. For arable and mixed farming operations, MF 5S tractors offer a host of output-enhancing features. Rear linkage lift capacity is increased to 5,kg across the range, and up to 6,kg in some specific circumstances, while the new, stronger front linkage capacity is increased from 2,kg to an impressive 3,kg.

Coupled with a higher, 9,kg Gross Vehicle Weight GVW , this allows the tractors to safely handle wider implements to improve workrates. Latest Smart Farming technology further improves output and efficiency. Details upon request. Authorised and regulated by the Financial Conduct Authority only in respect of agreements regulated by the Consumer Credit Act Very heavy duty push off buck rakes, fully flat back design, for use on rear or front linkage.

Our buck rakes can be used on telehandlers using an optional adaptor frame. Fitted with heavy duty conus 2 tines, and double side tines. Specifications: BR1 12 tine mm overall width empty weight kg BR2 14 tine mm overall width empty weight kg BR3 16 tine mm overall width empty weight kg. Ovlac Flagship range since with more than 85 years of experience and a range spanning more than versions. From conventional to reversible, mounted, semi mounted, on-land or in-furrow with 3 security systems, and can be specified with hydraulic vari width or fixed width adjustment.

Ovlac bespoke ploughs for you. Check for yourself why soil-working is our passion. Available with Choose the specification to suit required tasks All five MF 5S Series tractors are available with the choice of Essential, Efficient or Exclusive specifications.

These packages include a range of performance and comfort enhancing features to suit a range of applications. Typical equipment variations include hydraulic pump output, spool valve control, AutoDrive, joystick controls and cab suspension. Efficient specification is similar, but has two electric and two mechanical spools at the rear, standard air-con and an air-suspended seat, while the Datatronic 5 terminal becomes an option. Essential models switch to using a T-lever gear control in place of the Multipad, with the hydraulic joystick an option and AutoDrive replaced by Speedmatching on the Dyna4 transmission.

Datatronic 5 offers intuitive operation and is standard on Exclusive models and an option on others. This Isobus-compatible touch-screen operator information station monitors all the tractor functions and controls any Isobuscompliant implement. Datatronic 5 is pre-installed with MF TaskDoc software to create field records, as applied maps, log fuel use and make job reports, as well as keep an accurate account of all inputs to every hectare.

Alternatively, these functions can also be controlled on an optional Fieldstar 5 touchscreen terminal. Full VAT due on signing. Repayments payable in advance. Alternative finance options available. All finance quotations are subject to credit underwriting and approval. Over 18s only.

Terms and conditions apply. BRP reserves the right at any time to discontinue or change specifications, price, design, features, models or equipment without incurring any obligation. Some models depicted may include optional equipment. Photos taken outside the European Union, on private and authorised terrains.

Respect the environment and ride only to authorised locations. Always ride responsibly and safely. Both mobile and workshop based apparatus. Digital technologies are now being enthusiastically adopted by livestock and arable farms alike, as they seek to drive down costs, reduce manpower demands and make informed management decisions. Increasingly commonplace technologies include labour-saving robots to push up silage and GPSbased auto steering on tractors, sprayers etc, which improve accuracy and precision, as well as making field work less tiring.

In addition, precision application of fertiliser and sprays can help reduce the use of pesticides and fertilisers through a more targeted approach. Milking just over Holstein Friesians, he says production has gone from an average of 6, litres to just short of 10, litres in just under 15 years, with herd output rising from 1.

It makes a better mix than a previous machine, with well chopped forage and a mix that is better presented to the cow. Diet feeder boosts production by 3, litres Across the country, there are various examples of farmers who have improved their productivity and profit.

With Malcolm preparing to retire this year, after a career in agriculture spanning over 40 years, he has seen technology move from strength to strength, which has allowed UK agriculture to evolve at pace.

These new technologies have improved productivity capabilities for a huge number of farmers, but have also enabled a significant reduction in manual labour which is hugely important for the sector. In rural areas without a mains drainage system, and where septic tanks will no longer reach environmental standards,. Trading since , we pride ourselves on our individual problem-solving approach to finding alternatives for treating and disposing of raw sewage.

The Allerton ConSept converts your existing septic tank or cesspit into a fully functioning Sewage Treatment Plant The Diamond Sewage Treatment Range is suitable for either individual homes or small population applications When gravity drainage is not possible, choose Allerton Pumping Stations for sewage or dirty water.

Factory extension increases capacity At the end of , ScanStone moved its assembly line into a new state-of-the-art building, complete with air-sourced underfloor heating and all the necessary tools and lifting gear — and further expansion is underway.

Added capacity has allowed the development and construction of increased product ranges, particularly in the vegetable harvesting line — with ScanStone bringing to the market this year its very own haulm topper range, which includes a front-mounted. No guards or belts need to be changed, unlike other machines — the ScanStone needs only the.

Work on an additional paint drying facility, adjacent to the painting and shotblasting area of the factory, is due to be completed in spring With underfloor heating being installed and eventually an automated carrying rail, parts can be painted and dried within 24 hours, even during. ScanStone commented it believes training is paramount for optimisation of production techniques and machine capacity when at work in the field. The training facility will have capacity continued over….

The most recent building will also include a service workshop which will be fit for overhauling second-hand machines to give buyers an excellent value-formoney product with the option of a warranty and also for in- and out-of-season repairs.

This can only be done by making investments in infrastructure, as the number of machines working on the ground. Typically, a destoner or any of our product line requires parts and service back up when it is being used, it is not really a one-off purchase for the farmer. The company has been extremely fortunate to be able to stay open and keep supporting the food industry amidst the global pandemic.

Spapperi Inter Plant Weeder - Reduces reliance on chemicals to control weeds - Increases productivity - Reduces labour costs - Works in and around row crops including pumpkins, rhubarb, Christmas trees, brussel sprouts - Available as 1, 2, 3 and 4 row machine james jfhudson. Our products have been rigorously tested by our contracting division and we trust them to do the job every time.

Redrock Slurry Solutions www. R Dribble Bar and Trailing Shoe systems available in 7. Setting new standards in fertiliser spreader performance and use In Spinning discs for Double, Double overlap precision with no striping.

Variable rate ready. Hire company and manufacturer goes from strength to strength As a hire company, manufacturer and dealership, Suffolk-based Agri-Hire has many strings to its bow.

We caught up with general manager Ben Clowes to find out how the business has evolved over the past 35 years. Now solely owned by Tim Hubert, the business began as a hire company in East Anglia, predominantly for muck spreaders, but has evolved to manufacture its own muck spreaders,. Among its most popular machines are the vertical beaters, though the popularity of different sizes varies year by year.

Over time, the company also developed into a dealership, stocking Mzuri, Weidemann, Sealey, Dickies, Hoggs of Fife and many more. As a hire company, it has specialist insight into what farmers need. It also has a specialist hydraulic hose division — Agri-hose Hydraulics — for its immediate area near Ipswich, as well as specialising in PTO transmissions nationally.

Agri-Hire recently invested in new CNC milling machines and lathes to complement its manufacturing. Having been a Dowdeswell dealer for many years, when Dowdeswell ceased trading, Agri-Hire took up the mantel, beginning by producing its own beams and H-Links to work with genuine Dowdeswell parts, to now manufacturing the complete machine in-house — including headstocks, legs, leg holders and frogs, as well as the complete spare parts and wearing metal range.

The company also has a new Magnum, 50m3 triple-axle muck spreader due to come out early this year. Boost colostrum quality to protect calves from scour Unfortunately, the UK farming industry is still losing too many calves to scours; it remains the most common cause of death in young, pre-weaned cattle. On dairy farms, calf deaths due to scour had been seen by more than 65 per cent of units.

Dr Baxter-Smith explains that the key to better control of infectious calf scour lies in immunity-led disease prevention, supported by good management and hygiene. On many units, normal colostrum may not provide enough antibodies. This should be followed by two additional litres within 12 hours of birth. Dr Kat Baxter-Smith says that the key to better control of infectious calf scour lies in immunity-led disease prevention supported by good management and hygiene.

Increased usage flexibility The Bovilis Rotavec Corona from MSD Animal Health has recently been licensed for use up to 28 days after the first opening of the immediate packaging. The previous license meant the product needed to be used within eight hours of opening.

For producers taking an immunityled approach to their herd health programmes, this extended shelf life will mean greater flexibility in preventing infectious scours on many calf units and will help reduce any unnecessary wastage of vaccine on farm.

Bovilis Rotavec Corona is used for the active immunisation of pregnant cows and heifers, 12—3 weeks precalving, to raise antibodies against rotavirus, coronavirus and E. Calves gain protection by drinking the fortified colostrum from their vaccinated mothers. Vaccine storage and administration To maintain the efficacy of the Bovilis Rotavec Corona vaccine, it must be stored properly — upright and. A broached vial will be able to be used once more during the next 28 days after the first vaccination event and then discarded.

Vaccination equipment such as needles and syringes should be sterilised. Use of a multi-dose syringe to minimise vaccine contamination and excessive broaching is recommended. MSD Animal Health says that vaccine vials should still be shaken well before use. The injection should be made through an area of clean, dry skin with precautions taken against contamination.

Taking steps to prevent youngstock illness is critical to the long-term productivity of that animal and your business. For more information on how vaccination can be used to prevent scour and other youngstock diseases — and the detail on the correct fridge storage protocols for animal medicines — please contact your usual animal health product adviser.

Bovilis Rotavec Corona is used for the active immunisation of pregnant cows and heifers, 12—3 weeks pre-calving, to raise antibodies against rotavirus, coronavirus and E. Calves gain protection by drinking the fortified colostrum from their vaccinated mothers as shown.

The single dose, broad specTrum calf scour proTecTion you expecT wiTh increased flexibiliTy The only calf scour vaccine with 28 day in-use shelf life. A broached vial can be used once more during the next 28 days after the first vaccination event and then discarded. Use of excellent aseptic technique and a multi-dose syringe to minimise vaccine contamination and excessive broaching is recommended.

Reference: 1. GfK Sales Data September Further information is available from the respective SPC, datasheet or package leaflets. Advice should be sought from the medicine prescriber. Thakeham Farms saw positive results for bulk milk production and quality after introducing the NovaPro blend. Dairy diets: Should we go soya-free? As dairy farmers seek out alternatives that do not compromise cow health and performance, protected rapemeal could hold the key.

Sarah Kidby reports. Concerns over soya and its established links with deforestation have never been higher. Although sustainable certification can be procured, it is difficult to verify and monitor, so other retailers are likely to phase it out. It is also worth noting that tightening global supplies of soya have driven prices to a margin-compromising level.

Moving away from soya rations could, therefore, bring environmental and economic benefits, but what are the alternatives and how do they impact productivity? New diets were formulated with more rapemeal and distillers wheat dark grains, with protected rape expeller NovaPro to provide quality bypass protein.

Soya hulls were also replaced with sugar beet pulp and palm kernel to maintain NDF levels. An initial trial showed positive results for bulk milk production, which rose approximately 1 litre after NovaPro was introduced.

Milk quality kgs showed a similar trend. Averages from the three recordings before, during and after the NovaPro feeding period were: 1. Protected ruminant proteins work by increasing the bypass protein, lowering its digestibility in the rumen and increasing the proportion that passes intact, to be digested in the small intestine.

This increases the availability of the essential amino acids lysine and methionine to the small intestine.

These two amino acids are both present in rape-. Yelo is currently undergoing a detailed carbon life-cycle analysis on its products. Its facility is supplied by its own renewable heat and power, using UK-sourced, low-grade biomass residues or clean recycled wood chip derived from used wooden pallets.

The wood sugar used in the process is a co-product from the wood pulping industry and for every tree used, three are replanted. Yelo says the environmental footprint of rape cake has around 60—70 per cent of the impact of soya. What is NovaPro? It uses per cent UK-grown oilseed rape in its manufacturing process, supporting British farmers and reducing food miles. While many protected rapemeal diets are available, NovaPro uses heat and mechanical presses to squeeze oil from the rapeseed, creating a high energy rape expeller — rather than producing rapemeal with hexane solvent extraction.

The residual cake is treated using a unique patented process with Xylig, a wood extract rich in Xylose,. A study by the Sustainable Food Trust SFT found that 85 litres of milk is produced in the UK for every kilo of soya bean meal consumed by dairy cows — whereas no more than 7. Drinking milk from cows in the UK therefore uses 11 times less soya than consuming drinks made directly from soya. While soya production does not always result in vast areas of rainforest being cleared, it has to travel thousands of miles on vast, oceangoing vessels to reach our shores.

Navigate quantifies temperature differences in the top and middle of the clamp to highlight fermentation losses and identify spoilage. Alltech Navigate is unique in that it addresses feed wastage and utilisation across the entire feed system, Mr Kendal states, considering the process in four key stages, including: in the field; during storage; at feed-out; and inside the cow.

When looking at the cow, Alltech specialists consider her environment, rumen function, health and fertility. An average farm scenario with cows, producing 8, litres a year at a feed rate of 0.

The free Alltech Navigate assessment is designed to look at waste across the whole farm and put a financial figure on it. Kendal points out is unsustainable, both financially and environmentally. The zero-fee Alltech Navigate assessment is designed to look at the whole feeding process on farm and put a financial figure on it — giving farmers a personalised report highlighting money-saving opportunities and providing practical advice. Farmers can then use the data to direct their investment choices in a more informed way.

Action recommendations may be low-cost, easily executed and possible within a short timescale. Even small steps, when combined, may lead to significant improvements to the bottom line. Other recommendations may be more expensive, but lead to. This could result in a 5. There would be savings of 10,t of co2e over the group per year, which could offset the emissions of four average dairy farms — equating to 4, cars off the road each year, or 1, fewer flights around the world.

This is not based on feeding particular products or making substantial investments, Mr Kendal explains, but instead reducing waste and improving efficiency and sustainability.

Water provision is among the most common pinchpoints seen on farms, but is a quick and easy way to improve feed efficiency. Alltech Navigate aims. Mycotoxins are another key issue. Assessors can turn this temperature difference into an energy value, then a milk value, then a monetary value. They can also demonstrate how well compacted the silage is from the middle of the clamp to the top and the shoulders, so farmers can gain an insight into wastage in those areas.

Having looked at storage, feed-out is assessed. This includes considering factors such as feeding troughs space and set-up, feed sorting or rejections, the number of times feed is pushed up a day, how accurately the ration is. Recommendations generally do not involve significant changes to the farm or substantial investments — savings can be made through steps as simple as adding another water trough, adding a live yeast to the diet or taking a few steps to get on top of mycotoxins.

As the farming industry faces growing challenges — ranging from Covid, Brexit, rising pressure to reduce environmental impacts, and extreme weather — Alltech Navigate offers farmers a simple, practical way to make significant savings, without putting a large dent in their bank balance.

For those looking to try the free assessment, it involves filling in a form with details of health, fertility, cow performance and feed details, plus your targets. A contactless site visit will be carried out before producing a personalised report. For further information visit: www. New mineral range for alkalised ruminant diets FiveF Alka Limited has launched a range of bespoke mineral supplements, formulated specifically to complement alkalised ruminant rations including Alkagrain or Alkalage.

All the new in-feed Alkaboost minerals contain additional sulphur to help ruminant livestock utilise the excess non protein nitrogen NPN produced in the rumen by alkalised diets. The range includes bespoke formulations for various dairy and beef rations, a mineral specifically for growing lambs and a specialist Alkaboost product that combines the inorganic.

This is recommended for lambs being finished on a high cereal content alkalised ration. Feeding rate is 15—20g per head per day. The addition of a yeast culture and non-medicated plant spices helps to improve rumen pH regulation and increase propionic acid production, which together boost intake and available energy. The plant spices also help to increase protein availability from the ration. Farmers making alkalised rations should talk to their usual merchant about supplementation using the Alkaboost minerals.

Administer as soon as possible to newborn or bought-in calves. Suitable for use on all dairy and beef calves. Optimising your milk yields As farmers face the most complex blend of challenges seen in decades, it has perhaps never been more important to optimise productivity and efficiency. With this in mind, Provita technical adviser George Shaw explains how to boost milk yields and reveals the results of a sample analysis.

Provita Animal Health has developed a range of products for cows and calves to optimise milk yield and profitability. The company says its constant innovation will ensure further advances in the production of animal health products that will improve animal welfare and performance naturally. Provita products are designed to supply approved additives in optimum levels and in the correct ratio, to help ensure maximum productivity from livestock.

Provita Vital Boost can increase average milk yield by over three litres per day. Proactively offering Vital Boost within the first hour after calving helps the transition into early high milk production and the prevention of issues associated with elevated stress levels and immune suppression.

This energising drink will also increase appetite so that early feed intakes are stimulated to further enhance early lactation production. This is confirmed by preliminary in-house studies showing an average milk yield increase of 3. Managing downer cows Much has been written and said over recent years about the need to manage the dry cow properly,.

Even on farms where the highest standards of dry cow management are practiced, cows still can become recumbent and low blood phosphate levels can be a key contributor.

In addition to perfecting the edges of your stock you can also straighten faces, called face jointing. I use my band saw a lot. Another extremely versatile tool. WoodWorkers Guild of America works hard to provide you tool education and tool reviews.

Have a look at what we offer. We produce lots of articles and videos designed to make woodworking for beginners go more smoothly, with fewer errors along the way. Do you have a different Top 5? Join the discussion in the tab above or email us at editor wwgoa. Click here to cancel reply. I might add a stationary sanding unit, which I do have, and find it nearly indispensible. I have accumulated all of the top 5 but have yet to purchase a jointer due to costs.

Thanks for the input. Also, hand planes can be a great help for face jointing boards. If all you do is edge joint then stick with the router. I do all my edges with a router and it works great. You only really need a jointer if you are doing faces.

How I helped. What stationary power tool would you spend the most money on? Or, which of the 5 would you go out and try to buy the best you could afford? ZD: I still like bringing the saw to bear on the work rather than pushing the work through the saw. Therefore, I use my radial arm saw most often and the table saw only when I have to.

I think next purchase should be planer or joiner or band saw? Hi, Thomas. Your next tool purchase should be based on the projects that you build.

Miter saws are great and I agree with your assessment. You can make many of those cuts on a table saw, but you are more efficient if you have a miter saw set up. Can a Makita or Festool Track Saw be a good substitute for a table saw? Doing some reading on several forums, many seem to prefer the track saw over a table saw. Will I be able to do cabinetry such as closets, bathroom vanities, etc with a track saw and track saw table setup?

Hi, Patrick. In a space constrained scenario, a good track saw can enable you to do some very high quality work, and you can perform many of the tasks that are commonly performed on a table saw. You could definitely build closets, vanities, and a great variety of other comparable projects with a good track saw. The advantages that a table saw can bring are efficiency, repeatability with a single fence setup, and support for a dado blade.

Thank you for that info. Is there any recommended size for crosscutting? Reason I ask, that will most likely be my scenario when I purchase lumber. I do have a 12 inch compound miter saw but cutting to size on that with 18 inch depth panels is hard in one pass. I agree with your list. My table cabinet saw has a router mount built into the table to the right of the blade and it works great. The table is flat cast iron and I can use the table saw fence.

I also build radio control airplanes and the small one works great on small stock. Hi Jim. You can edge joint on a table saw or a router table. All you need to do is to get the board flat enough to ride smoothly through the planer.

Then you can plane both sides to get a flat board. Yes, I realize many question why anyone would ever need a radial arm saw, much less prefer one over a table saw, but I grew up using one and use it for all sorts of projects.

Cnc Router Where To Buy Storage Cabinet Locking Mechanism Review How To Make A Frame For Jersey 4th Woodworking Pencil Gauge 60