%!$ Easy Diy Woodworking Bench Plans For You #!@

paint-shop-dust-control-systems Every paint shop is different. TKS offers each paint system as an independent module, so each customer can mix and match to meet their requirements. We specialize in providing custom designs & custom engineering for each client for each vehicle. We are a full-service design-build industrial contractor.  We focus on centralized paint quality control, paint composition and supply works, organic solvent regulations, and energy-saving measures like electric pumps (vs hydraulic). The goal is a stable and improved paint quality for our customers. Automation & Robots.  We design our robot paint systems to provide the most efficient painting process within a spec'd time frame to determine the optimal number of required robots. Spray Booths. See more ideas about shop dust collection, dust collection, dust collection system.  Portable Dust Collection System With Noise Reduction & Dust Separator Using Shop Vac: This is a dust collection cart that I made for my small workshop that serves multiple purposes:o It provides a handy portable working surface of various shop projectso It serves as my primary means of vacuuming dust from the floor and work surfaceso. Mini Cyclone Dust Collector Built from Shop Vac.  Dust Collection System Upgrade. Michael Alm. Michael Alm. I now must purchase another for me. To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by paint shop dust control systems experts with years of hands-on experience. I've used it with everything from planers wystems sanders with great success. I still have dust flying around in my shop when I use my table saw. Little difficult to manuever around,but well worth the effort.

Also in Restoration - View All. Also in Brakes - View All. Also in Cooling - View All. Also in Ignition - View All. Also in Data Acquisition - View All. Also in Interior - View All. Also in Tuners and Programmers - View All. Also in Electrical - View All. Also in Wheels - View All. Also in Engine - View All. Also in Marine and Powersports - View All. Also in Nitrous - View All. Also in Exhaust - View All.

Also in Off-Road - View All. While sanding paint off doors, very fine dust, I use to unblock the paper filter of my shopvac every couple of hours, now I can work all day and only empty the plastic bucket.

The deluxe kit was easy to assemble and the DD works great. I am a beginner wood worker and don't know how I got along without it. I use the DD in combination with the Craftsman smart plug and they are a great combination. This works great with machines that produce a lot of sawdust. I use it with a special shop vac designed for drywall contractors because my woodturning produces a lot of very fine sawdust.

The vac uses paper bags and a hepa filter. The bags filled fast before using the Dust Deputy. Now it will be years before I need to change bags.

I bought this for use cleaning up the small, oily metal clippings generated by my mill. The idea was to use my wood working dust collector for vacuum, but to catch the swarf before it could reach the collector. It worked moderately well, but there are some design issues. The port size is a little odd; 2" hose won't clamp directly over either the inlet or outlet.

The plastic lid for the bucket is a little flimsy; the cyclone separator rocks around on it. The whole assembly is so light weight that moving the vacuum hoses causes it to tip over. Included in the kit are casters for making a rolling base not shown in the Woodcraft picture.

I use the oneida hooked up to my shop vac for dust collection off my power tools. This model comes with 2 buckets so one acts as a holster for the other allowing you to attach it however you like to your vac or a homemade cart. If your looking to make a cart for it Shopnotes magazine issue 97 has a great plan for one. Great product from Oneida you wont regret buying this one.

This thing is great, I've emptied the full bucket 4 times and not 1 speck of sawdust or anything for that matter has made it into my shop vac! It all stays in the bucket! As a kit it tries to be complete unfortunately the suppled hose does not work well with my Rigid Vac. I know "There's nothing that can't be solved with duct tape," but it's a kluge. Also You really need to build a cart as it's cumbersome to drag around. It does work as advertized.

I'll work on it and write another reveiw when I've got the hose adapted and a cart built. I saw a couple videos of this item on YouTube and it convinced me to purchase it. I have to say it does everything they claim it does. I was tired ov having to clean out my shopvac filter each time the tub was full, the cyclone solves that problem. I will say that it is suseptible to clogging.

But it is very easy to un-clog, you just have to be aware of this and watch out for it. This whole system makes clean up a breeze. I Dust Collection Systems For Woodworking Shops Pdf got this system because I was tired of cleaning clogged saw dust and particles from my shop vac filter every time I had to empty the 5 gallon bucket.

It does everything it claims. I have noticed, however, that hand plane shavings will clog the port to the cyclone tube and I suspect that the shavings Paint Shop Dust Control 2019 that get through interfere with all the dust reaching the bucket because I do find a considerable amount of saw dust in my shop vac when I've been vacuuming up hand plane shavings.

I was tired of having to clean out the filter of my shop vac every time the tub got full. The Dust Deputy has done everything it claims. I have noted however, that when I vacuum up shavings from my hand plane that it will tend to clog where the vac hose enters the intake port of the dust deputy and when you introduce hand plane shavings it decreases it's efficiency in separating the fine dust from my shop vac.

There must be something about hand plane shavings that interupt the flow of the fine dust down in to the collection bucket. But either way, I'm not having to clean out my shop vac no where near as frequently and no more cleaning out the filter. Pro: I dump sawdust on the floor just to see the cyclone in action. Works great. Saves constant cleaning of filter to maintain maximum suction. Con: Creative cabinetry suggested to utilize the cyclone on your shop-vac.

I built a cart to hold my shop-vac and cyclone as a single unit with castor's and I love it. Just bought this from the Dallas store and got home and not all the items were included. From their website ad, the only item missing is the foam block. I can work around that but reviewing the enclosed owners manual, there are several pieces missing. Hoes adaptors, 3 , a bracket for mounting. Will have to check with Oneida's site for clarification. Maybe a mis-print or older manual.

Since the store is a ways away, I will just have to improvise to make this up. I have not run this system yet so the performance jury is still out. I have a very small shop with very simple cleaning and dust-control needs. I didn't feel the need for a complete, dedicated dust removal system. The Deluxe Dust Deputy kit provided the right balance of power, size and cost.

I just finished testing it, and it works just as advertised. Air flows through the system while the cyclone action traps most of the dust and shavings, which then fall into the bucket. You can actually see the crud swirling around inside! And rather than having to wrestle around trying to empty my big shop-vac, I can just pop the lid off the Dust Deputy and empty the bucket.

My only minor complaints are that the hose provided with the kit is rather stiff and the hose fittings on the Deputy itself don't fit very tightly. I may replace the kit hose with a more flexible one from the home center. Not sure if it has to be a specific length - I'll have to experiment. A little duck tape will keep the hoses from slipping off the unit. So far, I'm very glad I purchased the Dust Deputy.

I purchased this product to suck up dust while grinding out grout from my kitchen tiles. I found that the fine dust particles still manage to get into the filter in my shop vac. In fact I had to clean the filter every hour of use. Hopefully it will work better with sawdust.

Lastly; it seems a little overpriced for what you get. The weight of the unit hanging off the side of a moderate shopvac can tip it over. Use for wood lathe cleanup of chips and dust. It does work great and saves cleaning vac filter. Sales image shows lid reinforcing ring but not even extra washer include to back lid inside. I used nylon fender washer I had.

It must have something for this. The hose is very ridged and had a permanent kick so hose collapse at that point. Buckets are good quality though. Rather pricey for what you get, but it works very well.

The flex pipe provided,to me, is rather useless. I cannot hookup the unit yet because I can't find an adapter that will let me hookup the hoses. I built a cart similar to the one in shop notes , which is almost a must. The supplied hose is much to stiff, it will work, but I made my own. Any pull from the hose which I have none with the cart on the vortex cone and lid is now almost gone.

Without this mod, it is a very weak way to mount the vortex cone to the lid. This is a great product, especially when on sale [ Buy it and make the mods unless Oneida decides to make them at time of manufacture. This product does what it says. It works very well. I had to make a base for it ,buy wheels, and another hose to get it set up to my satisfaction.

To remove all of the saw dust waste products from my woodworking area. It does the job of keeping most particles out of the vacuum. However, the lids are very loose, barely staying in place on the 5 gal. When I switch off the vacuum, the lids often displodge.

I would not purchase again. The cyclone is assembled with what looks like silicone caulk. The top of mine promptly fell apart and will have to be refastened with some type of adhesive epoxy?

Works great to keep your shop vacuum's filter clean. If pail overfills it will overflow into the the vacuum's pail. The only problem is the unit needs to be secured to prevent from tipping over.

Also, depending on how the hose lays the unit will scream loudly. More of an annoyance than anything else. It doesn't work on very fine particles.

I used it to vacuum ash from my fireplace, and the majority of it ended up in vacuum's filter. It does separate sand, pet hair, saw dust etc. The price is very steep for what you get with the kit: 2 buckets, lid, screws, etc.

But the metal support flange is unique and isn't sold separately. Otherwise I would have bought just the cyclone module. I have grown tired over the years of opening my shop vac, brushing the filter down and blasting it with compressed air, all while trying to inhale as little of the dust and dirt as possible.

I used this unit for the first time this past weekend and Wow! Checked out the Oneida bucket and it was holding all of what my saw didn't leave on the floor. Well done engineering on Oneida's part. Mounting it to the vacuum was easy, but left a bit to be desired. Not sure if I could think of a better solution, but foam blocks squished between two circular buckets is a bit cheesy.

If I really cared that much though, I would have built a cart or something. Not a big deal though. It works!!! It makes the task of keeping a healthy work space a lot easier. The Dust Deputy works just like they claim it does. It is a little bulky, but the results are amazing. The cyclone worked great. It separated all of the dust and chips before it got to my shopvac. I didn't believe it until I saw it myself! Great at keeping your Shop-Vac filter clean.

Awkward to move, tips over easily. Nearly eliminates need to use bags when doing drywall, sanding, etc. Works great with a Shop Vac in my wood shop. I have a dust collection system, an air cleaner and use the Shop Vac to cleanup when I am done woodworking in the shop or when using a power tool not directly attached to the dust collection system. The addition of the Dust Deputy is saving me from having to clean the filter in the Shop Vac.

Nearly all wood particles from my turning on a lathe that doesn't get collected by the dust collector ends up being vacuumed up with the Shop Vac. This meant checking to make sure the Shop Vac's filter was clean on a regular basis.

Most everything excepting polyresins very light weight plastic shavings are ending up in the 5 gallon pail. Extremely easy to take the cover off, empty into a garbage bag, and dispose of it.

It is all in the dust deputy. I am getting one for the garage Shop Vac too, that is how impressive this add-on works for me and is saving me a lot of clean-up time. Using the DD on my jointer, planer, tablesaw, bandsaw, router, and pretty much everything I can use it on.

Vacuum suction is never lost because hardly anything gets to the filter on my shopvac. I need to build a cart to put both my shopvac and DD on. Without it, the DD has a tendency to tip over easily. Attached this to my 15 year old Craftsman ShopVac, using just the parts that were included, and everything fit great, including my existing hose.

After attaching the Dust Deputy, my shop vac has more suction power than it did prior to the Dust Deputy addition even without replacing the old, clogged filter. I did change out my existing shop vac hose to 2 10' 2. The only complaint is that with the Dust Deputy "free standing", if I pull too hard on the hose, the Dust Deputy falls over. This will be easily fixed by attaching it to the shopvac, but I haven't yet determined how I want to attach it.

If you want to save money on vacuum filters, this is the best of all possible worlds. Since I put the Dust Deputy on line I can barely see any dust on the filter I put in a month ago despite the fact that I've been making crown molding and base cap for a new den plus fabricating deck beams for the restoration of a 10 meter Dragon class sailboat. Doing a little math makes this one a no-brainer. It saves constantly cleaning the vacuum cleaner filter.

I use the system as a dust removal on a belt sander and to add to my router table dust removal. Also use for general clean up in shop. Using this with a shop vac to do dust collection in my workshop. Almost nothing hits the shop vac, virtually everything get's trapped in the cyclone. The only down side is that he lid is weak and pops off easy Get the full kit.

Everything is in the box. And just like review and videos show, it went in the bucket. I put mine on a sheet of ply with casters, cust holes for my vac if I want to use it seperately and was off and running. One of the better upgrades I've made to the shop. Tipping is caused by vacuum pressure between the shop vac and the Oneida.

The port for most shop vacuums is well below the top port of the cyclone separator. Vacuum forces cause the hose connecting the Oneida to the vac to shrink along its length which pulls even a half full can over.

Further, the supplied hose collapses a bit creating a bend radius that restricts air flow. Shop solutions are to raise the vacuum my choice or restrain the hose in some kind of channel. Another problem is caused by the shop vac market. With the Oneida it's not necessary to buy a vacuum with a large waste container — most of the material goes into the Oneida.

However, the machines with the highest CFM also have the largest waste containers. You end up lugging around the 16 gallon shop vac and the Oneida. I have not owned the device long enough to determine if it extends the life of the shop vac filter.

Great product. Definitely performs as stated. Will keep the heavy and fine dust out of the vacuum filter. I use to connect my large Rigid shop vac directly to my power tools don't have a dust collector , but after running a decent amount of MDF cuts, the filter would clog right up and lose suction.

Installed this solution and now barely anything gets to the filter, which means full constant suction. Simple design to empty, detach and do the old dump and run with the 5-gallon bucket to avoid the blowback from your waste barrel - 60 seconds total.

Really great idea Works like it should, but afraid that it is not going to hold up. Flexes a lot during use, the base seems thin. The hose included is very low end I was amazed how little dust made it past this unit into the Shop Vac's filter. It will collect pounds of sawdust and the inside of the vacuum is barely dusty. I attach it to a dust bag under my contractor's table saw to pull the dust through, as well as using it for my biscuit cutter and sander.

I also use it for general clean up after a project. The instructions show it combined with the vac on a rolling cart which I might make someday. I use this product mainly for clean up in my woodworking work shop. I used to use dust bags but no longer find them necessary.

I haven't had to clean the filter since I purchaced the unit. Love it! This thing works great with my ShopVac and it is fund to watch all the debris, from my tools and general cleaning up in the carport where I use it' swirl around and round. I my ShopVac connected to an Iswitch from Woodcraft that turns on the tool and the vac together.

Highly recommended. This is a great addition to any shop vac. My ONLY comment is that using the foam blocks to mount it to you vac creates a wiggly out of balance machine. It is still a great addition to the shop vac. It allows you to use a hepa filter in your vac and avoid the filter becoming clogged and losing vacuum. I'm using it with a Fein vac and it took some searching to find an adapter to connect the 1. I used a rubber plumbing adapter.

I was sceptical that a small scaled version of their cyclone would be so efficient. But now I'm a believer. Using alot to remodel 's house. Cleans up plaster dust and old loose insulation very easily.

Little difficult to manuever around,but well worth the effort. Why have'nt the portable vac manufactures figured out a cyclone system works a whole lot better. A bit pricey though. I found this device to solve one of my most annoying problems, cleaning the filter on my ancient [ I would like to outfit my shop with a more sophisticated system, but can't afford it at this time, so this was a great compromise.

This unit works very well. The only negative is moving it around in my shop. Oneida provides a system to attach the unit to the vacuum but it doesn't meet my needs. I will probably build a cart to hold the Dust Deputy directly above my vac so the actual footprint doesn't increase. In spite of this small complaint, I would recommend this product. It actually saves me time by allowing me to collect several buckets of dust before I have to clean my filter.

Installed with shop vac used as Miter saw dust collection. Saw a lot of MDF as test pieces for segment turning. Dust was clogging vac filter continuously. Added Dust Deputy, no more clogging. Works like a champ. I am a Shop teacher and have a shop system at school but at home in my well tooled shop the dust collection is last priority unfortunately. This unit works well if you have the space to have this and a shop vac next to each other.

Only a little of the fine dust gets past the cyclone.

Wooden Block Plane Kit Uk Pen Hardware Set Example