Kreg Pocket Hole Jig Wood Thickness Notation,Wood Sided House Plans,Word By Word Basic Journal - Step 3
Smaller structures can be built from solid-wood. Plywood is great for larger structures. Determine where you want to drill your pocket holes. If the inside will show and the outside is hidden, such as on most kitchen cabinets, you can place the pocket holes on outside faces.
Set up your Kreg Pocket-Hole Jig to match your material thickness, and then drill the pocket holes. Assemble your structure using Kreg Pocket-Hole Screws. For solid woods, screw choice depends on the wood: coarse-thread for softwoods, fine-thread for hardwoods.
Though these clamps work differently, they both help hold the corner together at the proper angle. Plus, both clamps offer an extra hand, so you have both of yours free to handle your drill and screws.
Figure out the dimensions divider, shelf, or internal panel you need to create, and then cut it to size. Drill pocket holes along the ends or edges, as needed, to attach this piece into your box structure. Align the panel and then attach it using pocket-hole screws.
This clamp works great on corners. Whether you build shelves from solid wood or plywood, they tend to sag over time under the weight of their load. But you can also position the edging so it sticks up above the shelf to help hold items in place.
A good rule is to make the edging twice as wide as the thickness of your shelf. Or you can make your edging yourself by ripping boards to the width you need using the Adaptive Cutting System. Drill pocket holes in the underside of your shelf along the edge where you want to add the edging. Attach the edging to your shelf using Kreg Pocket-Hole Screws.
Of course, there are many more things you can do with your pocket-hole jig. Now, go get building! Check out our Kreg Pocket Hole Jig Minimum Thickness Projects and Plans page ideas, inspiration, and step-by-step instructions for your next project.
Make 7 simple joints with your pocket-hole jig. In the same box you will find the screw length. Be sure to test board combinations that you are not familiar with.
Use this calculator to determine the settings you need for your Kreg Jig and drill bit. It will also tell you what length screw works best for your wood thicknesses. Make sure to choose the correct joint type for your joint. Always test unfamiliar screw and jig setting combinations before using on your actual project. How to select the correct pocket-hole screw. July 14, Which pocket-hole screw should I use? Step 1. Step 2.
What kind of wood are you using? Fine-Thread for Hardwoods: Oak, Maple, Cherry, Birch, Ash, Walnut, Mahogany, Hickory Fine-thread screws for hardwoods On the other hand, hardwoods like oak, maple, and cherry are too dense and hard for coarse-thread screws. Step 3. Will your project live indoors or outdoors? Step 4. Step 5. Related Topics An inside look at how pocket holes work.
Related Plans Modular Closet Organizer. Six-Drawer Dresser. Console Table.
Woodwork Project Chest Java Kitchen Cabinet Door Brackets Youtube |
AFTOSH_QAFAR_088
16.02.2021 at 21:33:14
VERSACE
16.02.2021 at 12:30:52