%!$ Easy Diy Woodworking Bench Plans For You #!@

pocket-hole-jig-in-spanish-instructions How To Use A Pocket Hole Jig (Kreg Jig K5) w/ VIDEO - Making Manzanita

No category User manual pocket hole jig - Free-Instruction. Please remember to return your guarantee card within 28 days of purchase. Denotes risk of electric shock. Refer to the instruction manual of your power tool. It is ideally suited for use with materials 19mm thick. Pocket hole jig in spanish instructions you require further safety advice, technical information or spare parts, please call pocket hole jig in spanish instructions technical support department on Consider working environment.

Do Don't over reach. Keep proper not use the product in the rain or in a footing and balance at all times. Do damp environment. Do not pocket hole jig in spanish instructions power tools near hand positions. Observe the safety regulations in the gasoline or flammable liquids. Keep Never carry instruction manual of the power tool to be workshop at a comfortable power tool or accessory by cord or used.

Please read the following temperature so your hands are not pull it to disconnect from the socket. Failure to do so cold.

Connect machines that pocket hole jig in spanish instructions used Keep cord from heat, oil and sharp could lead to serious injury.

When using in the open via a residual current edges. Always trail the power cord electric tools, basic safety precautions, device RCD with an actuation away from the work area. Use only followed to reduce the pocket hole jig in spanish instructions of fire, electric extension cables that are approved for Connect dust extraction equipment.

If shock and personal injury. Also observe outdoor use. The accessory or attachment must be Read the following safety instructions collection facilities, ensure these are kept level and stable at all times.

Keep work area clean. Ensure there is sufficient attachment and cutting tools before The attention of UK users is drawn to The room to work safely. Use the attachment with the power secure. Periodically check when Regulationsand any subsequent tools and pocket hole jig in spanish instructions specified in this machining over long periods.

Do not force the tool or Stay alert. Use common sense. Do not Safe Use of Woodworking Machinery not designed. Secure idle tools. When not in use, under the influence of drugs or Document and any amendments. Users must be competent before using high or locked up place, out of reach Personal Protective Equipment our products.

For best control and safety use both UK and EU legislation. Although the safety Do not leave tools running attachment. Keep both hands away instructions and operating manuals for unattended. Do not leave tool until it from cutting area. Always wait for the our tools contain extensive instructions on comes to a complete stop. Always clamp workpiece being power tool involves a certain residual risk machined securely. Always keep guards in place and in safety mechanisms.

Power tools must good working order. Remove any nails, staples and other caution! General Maintain tools and cutters with care. Disconnect power tool when making Vibration levels. Hand held power Keep cutters sharp and clean for any adjustments. When not in use, tools produce different vibration better and safer performance. Do not before servicing and when changing levels. You should always refer to the use damaged cutters. Keep handles from power supply.

Ensure the dry, clean and free from oil and machine is switched off before grease. Maintain accessories. Do not use damaged accessories. Only use 2. Always mount the power tool, accessories recommended by the accessory or attachment in conformity manufacturer. The tool should not be modified or used for any Check damaged parts.

Before application other than that for which it operation inspect the attachment, pocket hole jig in spanish instructions was designed. Keep children and visitors away.

Do damage. Check for alignment of not let children or visitors touch the moving parts, binding, breakage, tool, accessory or attachment. Keep mounting and any other conditions children and visitors away from work that may effect its operation.

Have area. Make the workshop child proof any damage repaired by an with padlock and master switch. Authorised Service Agent before using 4. Dress properly. Do not wear loose the tool or accessory. Protect tools clothing or jewellry, they can be from impact and shock.

Rubber Do not use tool if switch does not turn gloves and non-skid footwear is it on or off. Have defective switches recommended when working replaced by an Authorised Service outdoors. Wear protective hair Agent. This piece of material is joined to the other piece and assembled with 30mm long self-tapping screws, which once driven into the material will provide a strong joint.

No pilot hole is required, but wood glue should be used to provide a strong long lasting joint. The screw removes the need for clamping pocket hole jig in spanish instructions the component can be handled whilst the glue is drying. The Pocket Hole Jig can be used both fixed to a bench or portably depending on the application. The most common position is screwed pocket hole jig in spanish instructions a bench and with the material clamped into the jig.

In the fixed pocket hole jig in spanish instructions position it is advisable to secure material the same thickness as the jig, either side of the jig body. This makes it easier to slide large components into the jig and also prevents it tipping. The Pocket Hole Jig has two positions for fitting the clamp. The first position A allows material thickness of 16mm to 18mm to be clamped.

The second position B allows material from 18mm to 38mm thick to be clamped. The built-in push-pull clamp arrangement allows both hands to be free for drilling in both applications. For use portably, the jig can be clamped to the actual component. This is necessary for large or heavy components.

The correct setting is achieved when the clamp handle snaps closed when using two fingers of pressure. Always remove plug from power source before making any adjustments. If the component moves when drilling Pocket Hole Jig In Spanish Codes the pocket apply more pressure with the clamp by screwing out the pad further.

If too shallow the screw may not enter into the joint sufficiently. When working with thin material 16mm and mitres, the counter-bored hole will need to be shallower than standard. Shallower counterbored holes will result in the head of the screw being closer to or even above the surface, this is acceptable in certain applications where the head of the screw is invisible from pocket hole jig in spanish instructions. Setting the Drill Bit Depth The depth collar on the drill is used to control the depth of the pocket, which also sets the length of the screw that protrudes through and into the joining piece.

The collar is now set for 30mm long screws, which gives approximately half of the screw into each workpiece.

DIY Pocket Hole Jig: This article was originally posted to my website, www.- Be sure to stop by my site for more DIYs, repairs, and projects & remember to subscribe! Now on with the Instructable!Kreg Pocket Hole Jigs have become synonymous with DIYe. Pocket-hole Jig for do-it-yourselves. Positioning sliders allow you to easily adjust within 9 depth settings. Two hardened-steel Kreg drill bit guides feature a lifetime warranty. Depth-collar gauge is molded into the case for handy reference. Durable Jig body made from heavy-duty, glass-reinforced nylon. Pocket Hole Jig Handmade. By Polkilo in Workshop Tools. 14, Featured. Download Favorite. Introduction: Pocket Hole Jig Handmade. By Polkilo Subscribe to My Youtube Channel! Follow. More by the author: Hello! Once upon a time, for my homemade crafts, I made a conductor to connect to the oblique screw.

2x4 Project Ideas 2019 Woodcraft Stores In Chattanooga Bench Dog Hand Planes Llc