%!$ Easy Diy Woodworking Bench Plans For You #!@

tung-oil-jarrah Пропитки для дерева. Тунговое масло для внутренних работ ZAR TUNG OIL WIPE-ON FINISH. Тунговое масло для внутренних работ ZAR TUNG OIL WIPE-ON FINISH. руб. Объем.  Масло втирается с помощью ткани или аппликатором и обеспечивает отличную отделку и красоту покрытия. Человек использует тунговое масло давно, еще со времен постройки деревянных судов. Современное производство мебели и разных предметов обихода без масла тоже не обходится, причем изделия после нанесения такого покрытия обретают высокое качество. Содержание: Тунговое масло — что это. Характеристика и состав продукта. Свойства и использование масла. Марки тунгового масла. Способы применения продукта. Хранение и меры предосторожности тунгового масла. тунговое масло или китайское древесное масло является олифой получено путем прессования семян семян из ореха тунгового дерева (Vernicia fordii). Тунговое масло затвердевает при воздействии воздухом (посредством полимеризации), и полученное покрытие становится прозрачным и имеет глубокий, почти мокрый вид. Используется в основном для отделки и защиты древесины, после многочисленных слоев покрытие может даже выглядеть как пластик. Appreciate any insights you can share! One side was less than tung oil jarrah. Santa Maria. It looked beautiful for about 3 weeks and then it started to fade. There was an error submitting your subscription.

I probably should to practice but I will decide that soon. I cut the bearing edges today. One side was less than desirable.

But then I changed to a newer bit and it cut alot better. I think the router bit I was using was blunt. The edges are round-over outer 45deg inner. I also put another shell in the mould. I think I may have made the mould a little too undersized. Oh well. Here are some pictures of the edges and also one with a dusty head a rim.

Its looking ok, but there is an issue with the seams. Hopefully i will have this sorted out soon. Its easy to pull out a drum after 4 ply and then put it back in with the mould so I might start doing that instead of wasting all this veneer. Here are some pictures… I have started to finish this drum, just with tung oil, but I plan on putting some Hardware on it.

I want to put brass on it, but I wanna buy it all from the same place. Today I pulled the shell out of the mould. Everything went OK, could have been better and could have been a lot worse. So there was no gaps in-between any plys which is a good thing. There has been a few issues with the plys moving after the pressure has been applied, I think this is to do with the PVA glue.

And the only other issue is the seams, I Need to get the each leaf of veneer measured exact; the seams looked perfect in the mould, but moved out about mm. HOME About. Share this: Twitter Facebook Email. Like this: Like Loading Bearing Edges Ok so a little update from yesterday. The Big Reveal Today I pulled the shell out of the mould. I also sweep and vacuum as needed.

To get the floors more deeply cleaned, I clean the floors every week or so with a barely damp microfiber mop Tung Oil Food Safety mine is from Norwex. If an area needs a little extra scrubbing like a muddy foot print or food spill , I just use a little dish soap which keeps from damaging the finish. If it does affect the finish, it can be re-oiled. Over time, it will be necessary to re-oil the floors.

This helps more oil soak into the wood to protect them. We just re-oiled the floors in October. I could tell the finish was dulling a bit and needed a refresh just like we need to do periodically on our butcher block countertop, which is also finished with tung oil.

I sprayed a mix of 2 parts citrus solvent to 1 part tung oil on the floors in sections. Then, I buffed it with a high powered buffer borrowed from my in-laws. It looks beautiful and restored a lot of the lustre in the floors.

I can tell the oil is working because the first time I went to mop the floors, the limited water on my microfiber mop just beaded up on the floor. These are a totally different ball of wax. We'd love to send you more inspiration and encouragement for your home. When you sign up below, we'll send you our free guide to save thousands on your next home project. Because your home shouldn't own you. And I also love how you embrace your not-a-perfectionist tendencies.

I can definitely relate. Thanks for this update. My wood is oak and has polyurethane finish. I hate it! We too live in the country on a small farm and the finish is worn out. When we do get to refinish, it will be with tongue oil! I loved these floors when you guys installed them. I still love these floors. Even the areas where you see the sun has darkened it! To me, that just screams a lived-in, loved house.

Ginny It has been more than two years since we finished the floors in our home, so I thought it would be the perfect time to share our real-life experience living with floors finished with pure tung oil. What am I talking about and what did we do to our floors?

Here we go … Are we satisfied with the pine floors finished with tung oil after two years? They look different than floors you see everywhere else. And I like that. But I love the look of Tung Oil Home Depot the floors as they age.

Would we recommend others use a tung oil finish on their floors? It depends. Ask yourself: Do you want a natural and nontoxic finish? Pure tung oil is both. Do you want to have a finish that is easy to touch up with scratches and dents? Pure tung oil can be rubbed into scratches and dents to revive them.

And areas can be independently sanded and refinished without doing the entire floor. Do you consider yourself a perfectionist? Do you want a shiny finish? But you will never see your reflection in these floors. Are you okay with periodic maintenance of the floors?

Unlike poly or prefinished floors, floors finished with tung oil will need to be Tung Oil And Beeswax re-oiled from time to time. Are you okay with nixxing most of the harsh cleaners? If you insist on cleaning with bleach, harsh soaps or specialty cleaners, this may not be for you.

How does the flooring hold up in high-traffic areas? So the idea of having wear and tear on wood floors is not limited to tung oil. How does it handle liquid spills? How do we clean and maintain it? I could tell the finish was dulling a bit and needed a refresh just like we need to do periodically on our butcher block countertop, which is also finished with tung oil I sprayed a mix of 2 parts citrus solvent to 1 part tung oil on the floors in sections.

I used a clean T-shirt to buff the floors and went over the most-trafficked areas twice. Where should I look for other resources about tung oil floors? For more inspiration and tips for using Pure Tung Oil, try these: Start with this full run down of using Pure Tung Oil on wood floors from the manufacturer of Milk Paint.

This is great inspiration if you want a stained finish — and I love her tip about using a sharpie to fill in dings before adding more tung oil. Hope this is helpful!

Incra Master Lift Ii 600 Banggood Uk Woodworking Tools Kr Hinge For Under Sink Drawer