%!$ Easy Diy Woodworking Bench Plans For You #!@

diy-shaker-wardrobe-doors-30 Again, I suggest using junk wood to practice. As you can see, there are small gaps on the edges. Leave a Reply Cancel reply We love hearing from fellow Remodelaholics, so let us know what you like about this and leave any questions below in diy shaker wardrobe doors 30 comments. It can be. Wardrobr you please respond to the many questions about how to handle the rounded cabinet door edges? What a great transformation!

I have always loved Shaker Style Cabinets. After lots of research and planning — I created a plan. I briefly considered making completely new doors, but as you might expect, that can cost quite a bit. What I ended up doing is transforming my flat doors into shaker style cabinets by simply adding trim to the doors.

I was shocked how easy this came together. It is time consuming, but not difficult… I promise. You will need some supplies. It took me about trips to the hardware store, so maybe I can help you reduce that number a little! This tutorial will be for how I actually transformed the doors into shaker style cabinets. I will be sharing with you my process for painting kitchen cabinets and doors tomorrow. This is a budget friendly solution I found to transform my kitchen without breaking the bank.

These doors are NOT perfect, but you would have to look pretty hard to find a problem with them. Please use this as a guide and as suggestions. Use all tools with caution! I am not responsible for any errors you might encounter when using this tutorial as a guide.

To get started you will first need to remove all the doors and hardware from your cabinet bases, clean them with a pretty strong cleaner, and sand them down. I started with 80 grit sand paper, then , and finished it with grit sandpaper using my Ryobi Orbital Sander. Like I mentioned my cabinets are oak. Be sure to wipe it clean and so that there is no dust left on the doors. The super nice people at the hardware store ripped down my plywood for me. This saved me tons and tons of time and most likely lots of frustration.

I measured all my doors and decided on going with a trim width of 2. Measure each of your doors individually before cutting your trim to the size of your door. I like to go with the whole measure twice cut once theory! I did full length strips vertically first, and then filled in the tops and bottoms between those two strips. Be sure to take this under consideration when you are measuring for your horizontal strips.

My doors have a slightly rounded edge, so I measured right were the rounding started, this does leave a small lip on the outside of all my trim. I took all my pieces, stood them on their sides and sanded that part down as much as I could with the grit sandpaper.

Once you have your pieces cut and the edges sanded, using your Ryobi Airstrike Nailer, nail each trim peace onto the door starting with your two vertical pieces, and then your horizontal pieces.

Nail in the center first, then move to the ends. Become friends with this stuff. You will be using it A LOT! Fill in all the spaces between the trim pieces and the nail holes in the trim. If you have any deep scratches or holes in your doors, now is a good time to repair those as well. Following the directions on your container let dry, and sand with grit sandpaper until smooth.

I chose not to caulk the inside and outside edges of the trim. I did take my detail sander and sand the edges of the plywood again in any spots where it looked a little rough. It is soft on the inside and I wanted it to be as smooth as possible.

Again, caulk if you want, but the primer and paint did a great job of hiding it for me. I will be sharing how I painted my Shaker Style cabinets and doors tomorrow, so be sure to stop back by for my tips on that! I went with oak because that is what my cabinets are. I personally prefer something with less of a grain. It will depend on your cabinets for what you should by.

To be honest, I measured as best I could, but I did have to do a lot of extra cutting. I always leaned to the longer side so I could just trim it off if need be. Trying to find an exact measurement on rounded corners is a little hard. I did one door at a time. There was no way to set up an assembly line without making tons of errors.

I wish I could tell you. I planned on building all the doors in one weekend, but come to find out… kids are very good at distracting you and needing your attention. I also did lots of stuff in different phases so I could take pictures for you guys.

I did all my lower cabinets first and painted them before building my top ones. It is definitely time consuming…. I would plan for several FULL days of working. If you can work from morning til night and you are familiar with the process of building, you could probably do it in one day depending on the size of your kitchen. You can read all about my countertops here. Still have questions? Leave them below and I will do my best to answer any questions you might have.

How to Paint Kitchen Cabinets. How to Alter Kitchen Cabinets. DIY Kitchen Island. To see the full kitchen reveal, click here. Want to see our kitchen progress?

You can check out our f ull journey here! Ashley is a stay at home mom to three beautiful children. She and her husband recently settled in the Midwest after spending the beginning of their marriage in Texas what a change!

Together they are raising their children, and turning their house into a home one project at a time. Ashley enjoys decorating and crafting, but her true passion lies in redoing old furniture and making things look old. I did this in my kitchen!! Let me know if you want to see the before and afters! I shared your site with my friends! I love your kitchen Ashley!! Shaker style is my favorite!!! My cabinets are nice, but not my favorite.

Thanks Crystal! I think next time I just want to install new ones, lol. It took me so long since I had to work in 30 minute increments with my kiddos calling me name all the time ;. Love your kitchen transformation! I have been planning on doing this same project the year but have not had time to complete it. Thanks for the great tutorial, makes me want to start the project right now! I cannot even believe where these cabinets started! You are a magician. Awesome tutorial! What a great transformation!

Looks so updated and fresh now! Hi there! Love the transformation — just curious, did you just do the doors or did you do something with the insides of the cabinets as well?

What do they look like when they are opened? Thanks so much Chloe! I painted the bases and the insides of the cabinets as well, so when they are opened everything is white… well except for my mess of dishes ; Have a great night! I have similar cabinets that I want to change up and your tutorial is exactly what I was looking for. I had a question about the drawers — did you trim them out or leave them flat?

Most of my bottom cabinetry is drawers so I was trying to decide what to do. Hi Kylie! Sorry for the late response. If I had larger drawers I probably would have trimmed them out as well. Let me know if you have any other questions! Ashley, your tutorial is amazing!

I have the same type cabinets with the rounded edges. You mentioned that in the tutorial but I was wondering if you filled in the gap between the door and the new trim?

Thanks for the inspiration to redo my own :. I am interested in this as well. Have the rounded edge cabinet and would LOVE to do this. Has anybody tried? I realize this was posted quite a long time ago and the OP, followers or blogger may not see this, but I am interested in the answer to this question or to seeing pictures of what the inside of that external edge looks like when you open the door.

Would wood filler work for that? I know you said yours are slightly rounded, mine are noticeably rounded. I have these exact same doors and have been playing around with the idea of doing this exact same process with them for years. I was worried that they would not look good enough. Now I am totally inspired and have decided to go ahead with it. Thank you so much for all your wonderful information.

I know I will be using your blog a ton to help me with this project. Thanks so much!!! These are stunning and will certainly be part of the project.

Can u tell me if you primed and painted the inside of your boxes? Is that something you regret either way? The inside of ours was not pretty at all. Hope that helps!

Thanks for stopping by! About how much did this cost you? I know our kitchens are not the same size or can probably be compared but would love some idea for our tiny kitchen!

We are currently doing this exact tutorial on our cabinets. We are sanding everything as smooth as we can get but the nature of the plywood is to peel so it has me worried! Wondering how they held up over the years : thanks! And thanks for making this tutorial for us to follow! It will save a fortune and many hours of filling and sanding as well. Oh yeah. Another thing. Buy your handles from Amazon.

Same is true of self-closing stainless hinges. I love this! We are in the process of buying a home built in and we are redoing the kitchen. Same flat doors with rounded edges except ours look like they have about 10 coats of paint on them! So I was searching on how to change them and came across this blog! I will be trying this for sure! FYI, in our home we are presently renting, I updated our kitchen with some inexpensive changes. I found these sites and will always go here first for all my hardware, knobs and pulls.

I get them from either 99 cent knobs or knob deals. Well worth it! Thanks for posting this! Love your kitchen redo!

What size did you use and how thick are your cabinets? Thanks, George. I love this idea and want to do my kitchen. Did you line it up with the top of the rounding, leaving a little door showing outside the trim?

Or did you line it up with the edge of the door? I am also wondering this exact thing. I am thinking i am going to fill it but i am not sure if that will make it look right. From the pictures it almost looks like she left the rounded edge, but its hard to know for sure. Making a dado is actually pretty simple. Line up your blade just off center for the first cut. When making this tutorial, I went too far off-center and ended up with this:. Yeah, I was WAY off center. This happened because I eye-balled it.

The best way to stop this from happening is by marking center on the wood and then having the blade line-up on the actual edge of the line. To ensure your groove is the right width, grab your plywood and do a test fit. If it snaps on, your groove is perfect. Check the dado to make sure it fits snuggly onto the plywood. Ok, ouch! No, not that tongue. The tongue is the edge of the wood that will fit inside the dado or groove.

Doing this is a bit more tricky but still easy. Again, I suggest using junk wood to practice. Continue to move your fence closer and run the horizontal stile through until you have created a tongue. The final piece should look like this:. If it is, it will not fit right. As you can see, there are small gaps on the edges. No worries… those will be resolved quickly. Measure the width and height of the opening.

Use these measurements to cut your center panel. Slide the panel back in and place the top horizontal rail in place. Clamp the shaker cabinet door and allow to sit for at least 30 minutes.

I always double check the width of a door when clamping by measuring at each clamp. When I first began working with clamps I would tend to clamp one side tighter than the other — resulting in an uneven finish on the final product.

And that, my friends, is that. Simply sand and stain or paint your shaker cabinet door, add some awesome cabinet handles and hinges and you are good to go. It took about 15 minutes to make each door not including the time it took for the glue to dry. In as little as a weekend, you could completely transform your kitchen by making your own shaker doors.

Not only are they stylish and easy-to-make, but the tongue and groove joint will ensure they hold up to the daily abuse in the kitchen.

Jill has been working for years to make her house into her forever home. With a love of high-end details, Jill works to recreate a high-end look on a DIY budget. I think the rail measurement is 1 inch short. I think the rail should be 16 inches for the door to be 18 inches wide. Great tutorial and information. Never glue in panels because it does not allow for expansion and the door will eventually warp. Instead, glue only the stiles and rails. I believe that she means that you make the groove a half inch deep.

You are correct that it should be a quarter inch wide. By the way, a groove is not exactly the same thing as a dado. A groove is with the grain. A dado is perpendicular to the grain. The close up pic of what the tongue should look like really confused me until I realised it did not match the final example pic. The first pic shows something you will never see if you follow the text.

Round Over Router Cutter 2020 Titebond Liquid Hide Glue Expiration Date Review Wood Box Plans Free Download Netflix Fine Woodworking Chair Plans 85