%!$ Easy Diy Woodworking Bench Plans For You #!@

digital-tape-measure-total-tools-open Ip54 to protect against dust and rain. An innovative concept that perfectly suits some tasks, but the overall build is not rugged enough oepn heavy-duty projects. W e evaluated 8 different tape measures from 7 different manufacturers, five of which had magnetic tips. Checked and updated on February 25, by Aaron Barnett. This is usually in a different color than the other markings — often red in contrast to the normal black markings. Many of the products that we review are provided to us for free by a manufacturer or retailer. The auto lock feature that you can turn on or off is an excellent option if you are working on your digital tape measure total tools open, along with the 3.

Leica sketch up vs. Bosch measuring master app. Comparing the top laser tape measures. Leica Disto D2 review. Bosch GLM review. Best value for money Bluetooth 4. Fits nicely in your hand with a wide variety of complex measurement functions. Has good measuring distance of up to feet. Leica has the best smartphone connectivity Match Photos with measurements. Takes very accurate measurements. Can be used in tight corners due to the intelligent end-piece.

Buttons can be stiff. Can be complicated to operate at first. Min-max function. Everything you need for basic. IP54 Certified dust and splash protected.

Bluetooth with MagicPlan app has been recommended. Has a good battery life of 5, Compatible with DeWalt tool connect. Excellent measuring range of ft. More durable build quality. It has the most important calculation. Bright and easy-to-read display. Intuitive and easy-to-use. Bluetooth 4. Cheap price. Buttons are a bit flimsy.

Fairly short foot range. Measures up to feet. Extremely accurate measurements. Very durable unit. The Leica has smartphone connectivity that matches photos with measurements.

Good range of measurement options. Works well even in low light conditions. It is expensive and a bit confusing. More long-distance laser measures with built-in cameras below:. Lots of measuring features. Quick and precise measurements. Wide variety of measurement modes. Menus are a bit confusing. Prone to occasional crashing. Compact and portable. Bright laser. Not the most accurate laser measure around. Measures only feet. Simple two-button operation. Solid build quality.

Very precise. Goes through batteries quickly. Laser dot can be hard to see in bright sunlight. Measures up to feet only. Has an inbuilt camera that can zoom in and help locate the point of the laser. Transfer measurements to smart-phone. Measures a distance of up to feet. Best value Bluetooth laser measure with an inbuilt camera. Inbuilt rechargeable lithium-ion battery.

You might not need a built-in camera. Capture 3D measurements and upload them into CAD with the blue-tooth technology. The camera has 4X zoom. Huge measuring distance of ft. Bit expensive. Addition and subtraction ability. Pythagoras Feature. A good distance of up to feet. Buttons are small. The battery cover can come loose. Can measure area and volume. Ip54 to protect against dust and rain.

Auto square feature. Easy to use. Can only measure ft. Can be difficult to read fractions. Compact and small. Runs on 2 aaa batteries.

Calculation features of the area, volume, and a continuous measurement option. Shoots relatively short distances of only ft. Easy to use the device. Can measure area. Second place was Milwaukee at 2. Followed by Klein, Komelon and Digital Tape Measure Toolstation Rate Lufkin at 1. Water or dirt that gets on the blade of a tape measure can work its way into the mechanism and cause slug, rust or jamb up the winding.

For this test we designed a torturous debris chamber recoil test. We repeated this sequence 4 times. This test proved too much for most of the tapes. Many of them would not retract and close less than 6-inches. We had to pull the tapes in and out to get them to close completely.

Once closed, we tested their recoil twice, from feet while measuring for time. Stand out is big to some guys, because a long reaching tape is useful when measuring alone. Stand out basically refers to how straight you can extend your tape without it bending or losing is rigidity. We made a jig with a degree angle and tested each tape three times for an average stand out measurement. All of our pro followers already know why the hook at the end of a tape measure is loose.

But for any novices, the looseness is very intentional and plays a key role in using the tape for both inside and outside measurements. When you butt the end of Digital Tape Measure Tools Kit the tape against a surface for an inside measurement, the tip is compressed against the end of the tape by the width of that hook.

Spoiler alert — the first inch of the tape is short by the thickness of a hook. When you go to take the outside measurement and hook it over the edge of whatever you are measuring, the hook moves away from the tape by the width of the hook.

And we wanted to see how the hooks on the tapes stood up to after our retraction test. The results varied. Out of the box, the Lufkin was most accurate with the hook thickness of. The Milwaukee tape had the greatest difference at.

After the retraction tests, we measured which tapes held their tolerances and which showed a marked difference after that test. Our theory was that the rapid foot retractions would eventually loosen the tape hook, distorting its tolerance.

We were right. In this comparison, both Stanley tapes performed well. Milwaukee also matched the FatMax performance of. The Lufkin tape showed the largest difference, increasing by. Ergonomics is about designing for the end user. For ergonomics we look at:. The best tape measure in the ergonomic category was the Milwaukee. The crew liked the d etent on the back of the body, and finger brake on the bottom.

The Milwaukee body has plenty of rubber over-mold on top and base. The extremely durable hook has solid rivets, a super strong magnet, a screw- nail slot with 2 upper tabs. The Milwaukee tape measure features a unique belt clip constructed out of wire bale instead of a flat piece of metal. The clip is specifically designed to reduce wear and tear to pants and tool bags. The crew noted that this belt clip was difficult to apply to a pant pocket one-handed, but once applied it does a phenomenal job holding the tape in place.

It has a rubber over-mold on top back and bottom, a strong, secure, positive clicking tape-lock that can resist 4 lbs. The crew liked the belt hook, and low profile magnetic hook with its screw — nail slot on lower tab and two upper tabs extensions. Third place went to Komelon which is a very comfortable tape to use, smooth recoil, and one of my favorites. Readability and durability are two words that stick when I think of tape measures. Three tapes tied for best tape measure readability.

On the back end of the tape the numbers allow you to read upside-down. This scale starts on the back of the tape at 10 inches and runs to 22 inches. One thing the crew noted was that after the inch markings, the tape markings get a bit busy to read. The markings are longer on this tape, and are labeled similar to the Komelon after inches. We dropped the tapes onto pavement, once at feet, and a second time at feet. We set up a personnel lift to do our drop testing. Almost all of the tapes survived our foot drop test.

The Klein tape measure sustained the most damage. The Tajima and Lufkin came in first place on the foot drop test. Both tapes worked perfectly and had zero visible damage. On the foot drop test the two most durable tape measures after drop testing were the Dewalt and the Stanley FATMAX, both sustained the least damage and were still usable after the test. Lufkin and Tajima came in tied for second place with slightly more damage but less than the rest of the pack.

The Klein came in last, due to its case braking open on impact. It placed second in four other categories, securing the 1 slot in our testing. This dark horse sneaked by the competition and took the 1 slot three times in several testing categories, and scored 2 three times and 3 six times.

After the testing it was apparent to me that these devices need proper care in order to provide you with accurate, reliable measurements. Caring for your tape measure is easy, here are a few steps for properly maintaining your tape measure. Robert Robillard is a remodeler, general contractor, and principal of a carpentry and renovation business located in Concord, Massachusetts, and serves as the Editor of Tool Box Buzz and founding editor of A Concord Carpenter.

Rob is in charge of our Tool and Product Review - Tool and Product Review - Video Channel, , where we post all of our tool reviews and video tutorials.

Rob enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the remodeling industry. The Concord Carpenter's motto: "Well done is better than well said! All posts by Robert ». Next time, please test lockout, some trades use tape measure as an adjustable stand, for example when soldering verticle piping, or trying to hold light objects up at perfect height. We did — zero issues. In hindsight we should have discussed that.

Thanks for the comment! Is a higher score better or worse? Hi Jeff- the lower graphs did better. Ill do the graphs differently next time — good feedback.

Fatmax extends well and that is all. Thank you for this article. As a tradesmen of more than 30 years I have been through my share of tapes measures. I have always liked Stanley tape measures but recently purchased a Milwaukee with the magnetic hook. The majority of my work has been finish carpentry and I liked everything about the Milwaukee except the magnetic hook.

It made it impossible to read the first inch of the tape. I replaced that Milwaukee tape with there non magnetic hook and the first inch is good to read. I find it surprising how vast a difference there is in the pricing of the tapes.

I guesss it proves the saying if you want something that works and is going to last you are going to pay more for it. One last thought, I find myself checking where the product was made before I purchase it. Almost anything with a built or made in the USA is good with me. Thanks again for suck a detailed article. As a Woodsmith I have found that the Craftsman sidewinder tape measure is a godsend to use.

Before I would try to make a mark on a board and then the tape measure would fall over, but not with this one. How about accuracy? Recently, we laid a few different tapes, side by side and noticed a difference.

There are a few Accuracy Class I tapes out there…. Thanks for your comment. I had not come across the distinction before. EU guidelines state a class I tape up to 2m in length must be accurate to within a margin of 0. Under the same guidelines a class II tape of the same length should be accurate to within 0. Accuracy was great out of box, no story there — but in retrospect we should have reported it.

Great feedback thanks. It was interesting until I got near the end and saw the prices. I have a tape in Digital Tape Measure Toolstation 15 all the work stations in my shop where I might need one. These are the Harbor Freight tapes that are often free when You are purchasing something else. I lose them before they ever wear out and since I have seven tapes in my shop one at the rip saw one at the table saw one at the radial saw one at the chop saw one on my bench and one at the drill press.

I can replace them for next to nothing and I will. Had to replace a tape a couple of months ago and bought a stanley powerlock. Whatever stanley did with their most recent manufacturing process, it sucked. Threw it in the garbage and bought a milwaukee.

Stand out on mine is at least 9 foot plus and the blade is significantly thicker. Stanley tools seem to have declined significantly in quality. Finally, the hooks are to short and will not catch on a board by just using one hand and pulling the tape measure.

Stanley quality is, IMHO, non existant. A cheap Menards brand, Performax, is better quality; not the best quality but better than Stanley. Nice test! So when I measure with the tape in my left and pen in my right hand, I will not have to read the numbers upside down.

I would be ready to pay a little extra for that feature! You know its funny that all the tapes you checked out are all read upside down numbers. These taps are make to hold in the left hand and hook on the right hand side which the numbers will be up side down and hard to mark. Why are not the tapes made to have the numbers right side up?

In the meantime, I did some research. Louis: I have 2 theories why this is the way it is: 1 In math, 0 is always on the left side, so tapes comply. In that case, fair enough! Somewhere out there is a post from a pro. When measuring, holding the tap in the left hand and hooking the end at the right end of the tape, why are the numbers upside down. As fare as I can see, all the manufactures make their taps the same way.

When marking a measurement with the number up side down it is not hard to make an error in marking. Can someone explain why. Thanks: Lou:. To protect the battery compartment, we needed to make sure that door had a firm closure to prevent it from popping open. This specific design is meant to make the unit more sturdy during regular use and allow it to take the drops that might occur when using a tape measure. The laser blinks to allow for the continuous measurement feature. As you move the laser either closer to or further from the target, the numbers on the screen will automatically adjust to the current measurement.

The pulsing of the laser allows the sensor to pick up the distance changes as you move it. This helps you to zero in on the correct measurement in real time. JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

How do I open and close the battery door? Why does the battery door seem so tight? Are there more detailed instructions available?

Mini Wood Turning Lathe Garden Bent Spoon Chisels Yield