Build A Wooden Trestle Bench Network,Under Drawer Appliance Lift Verification,Kobalt Radial Arm Saw Water - Step 2
A friend of mine recently asked me to build her a DIY trestle table and bench. This design would work great for an indoor OR outdoor table set. But in this case, I was building it for outdoors. Do note that you need to use exterior screws for exterior projects—they have a protective coating that prevents them from rusting or corroding.
And if you do plan to use this as an indoor table, be sure to check out this post for how to build table tops. Outdoor table tops need gaps for water drainage for rain.
But inside table tops are built differently and are usually attached as one solid piece. Okay, sorry for the long intro. I started with 5 degrees, but thought it needed a little more and I finally settled at 7 degrees. So all my legs on both the table and the benches are mitered at 7 degrees.
I cut these angles using my miter saw. Once the legs were cut down, I cut two top aprons and two bottom stretchers from 2x4s to go between them. I used pocket holes to assemble this table. Because the treated wood was so wet, it made the glue really runny and it was just squeezing out. Once I had my two sides assembled, I wanted to add a small detail build a wooden trestle bench network the ends before attaching the long apron pieces.
I wanted the finished table to LOOK like the long apron pieces extended through the legs. That meant I had one screw per piece for the table. I cut these pieces with a 7 degree miter on one end and clamped this end onto the leg.
Now it was time to put everything together. I cut two long apron boards to stretch between the two sides with 7 degree miters on each end. And again, I assembled these with pocket holes and screws. I installed two stretchers in the top to give me another surface to screw the top boards to later. And then I added a long stretcher between the two short table sides at the bottom.
But you could also use pocket holes and screws as well. I carried the table base out to the yard so I could take some pictures when I got finished with it. And I carried the top boards out build a wooden trestle bench network to attach them. Now, if build a wooden trestle bench network are building this as an indoor table and want a really clean, nice looking table top, I suggest checking out this post.
However, as an outdoor table, I did things a little differently. If you wanted to hide the screw heads, you could attach from the underside build a wooden trestle bench network. At this point, the table assembly was complete and I moved on to building the benches.
The bench design was similar to the table, but since the spaces were so tight, I assembled them slightly differently. In hindsight, there were probably easier ways to assemble this, but hindsight is useless once the project is finished, so it is what it is haha.
Then, I cut and attached the long aprons build a wooden trestle bench network the legs build a wooden trestle bench network. Once the two long sides were together, I cut three short blocks to go between them. I screwed the end pieces into the legs, then added another screw through the long apron pieces into the short build a wooden trestle bench network. And I added a piece in the middle here to keep the long aprons from bowing out.
Once the bench top was in place, I stepped back and realized the benches were missing something. I debated whether or not to attach small braces at the bottom of the bench legs to match the table. But you could also use pocket holes and screws, too. Again, there are a thousand ways to do this, and in hindsight, I wish How To Build A Wooden Bench With Storage It I had notched out the legs to set this piece in place.
Maybe next time. At this point, I went ahead and stained the table and benches with an outdoor stain and sealer. Now, the finish went on really splotchy because the wood was already so wet. For more furniture building projects, check out the projects page!
Facebook Instagram Building A Wooden Bench Vise Pinterest YouTube. How to Make a Concrete Landscape Curb.
Craftsman Radial Arm Saw Safety Kit Cat How To Build A Toolbox In Minecraft 015 Round Dowels Home Depot Kit Pocket Hole Jig Trinidad 6th |
Gulesci
11.12.2020 at 19:38:42
PRIZRAK
11.12.2020 at 16:42:35
LoVeS_THE_LiFe
11.12.2020 at 19:48:56
SPAWN
11.12.2020 at 21:58:31