%!$ Easy Diy Woodworking Bench Plans For You #!@

aqua-wood-grain-filler-40 You can edit your question or post anyway. I would post a link, but don't know how to. Aqua Coat Clear Grain Filler is a water-based, easy-to-apply gel designed for filling and leveling aqua wood grain filler 40 pores of "open-grain" wood structures such as oak, mahogany, and ash. I bend using blue spring steel slats with the side inserted into a dampened canvas "envelope" and rain water I'm on water catchment here and have never experienced any discoloration with koa. Privacy Policy rev.

Do you use fillers on the top woods at all? Or only on the back and sides. The main purpose of a filler is that of filling the pores of the timber in order to save polishing costs, both material and time. Charles H. Hayward, Staining and Polishing , I purchased a tub of Aqua Coat Wood Pore Filler last year with the idea of using it to fill wood pores instead of the traditional shellac and pumice treatment.

I tried it on some East Indian rosewood and was a little shocked at how much rosewood color the paste picked up and I was afraid that that color would bleed into the maple bindings so I abandoned the Aqua Coat. Yesterday, I decided to try the wood filler again on a guitar that has Claro walnut back and sides. I applied it according to the directions that a well known guitar maker posted in a short video on how to use the Aqua Coat and the results were terrible, the paste really didn't stay in the pores.

The instructions state to apply the filler and "inspect to see if the grain is completely filled, then scrape or squeegee to remove excess. Thomas February 19, at AM. Aqua Coat Clear Grain Filler is a water-based, easy-to-apply gel designed for filling and leveling the pores of "open-grain" wood structures such as oak, mahogany, and ash.

It reduces the number of sealers and top coats required to obtain a glass-like, high-build finish. Surface preparation: Surface must be clean and dry free from all dirt, oil, wax, and polish.

Sand surface thoroughly. Remove all dust with a vacuum, forced air, or water-dampened cloth. Recommedations for use: Always try product on sample board first.

Stain and seal coat Aqua Coat Wood Grain Filler 70 must be dry and lightly sanded with grit Aqua Coat Clear Wood Grain Filler Uk or finer sandpaper. Grain Filler can be tinted with water-soluble colorants or dyes. Grain Filler may be applied with a soft cloth, using a circular motion, much like applying a paste wax. Or work Grain Filler generously into open wood grain pores with a small squeegee or flexible putty knife. Inspect to see if the grain is completely filled, then scrape or squeegee to remove excess.

Let dry minutes, then lightly sand with grit paper. If grain is not completely filled, repeat the application process. Allow overnight dry time. A final coat of finish is always recommended over the Grain Filler. Aqua Coat Clear Grain Filler may be thinned with water and dries crystal clear. Do not let product freeze. Download SDS Sheet.

Created with Sketch. Toggle menu Login or Sign Up. Shop by Category Abrasives Abrasives. Gift Ideas. Workshop Essentials. Wood Burning. Shop By Brand.

Pocket Hole Machine Castle Zero Top 40 Best Rap Songs 2019 Quick Kitchen Drawer Router Bit Question Lathe Tools Northern Ireland Email