%!$ Easy Diy Woodworking Bench Plans For You #!@

quick-release-woodworking-bench-vise-view Made in Canada. A lower guide rail, not shown, mounts beneath the jaw. Care And Use. Product Added To WishList. Choose an option Second Hand Woodworking Vise Quick Release to add an item to your cart. Item

Bessey - Woodworking Vise. WoodRiver - Large Front Vise. Bessey - Multi-Purpose Vise. Wilton - Woodworkers 4" x 7" Vise. This unique design characteristic ensures a smooth, efficient operation that will make this vise one of the most versatile and frequently used tools in your workshop. Eclipse vises feature heavy cast iron jaws and solid steel slide rods for a lifetime of rugged use, and the vise jaws are toed in to assure positive clamping, even under the heaviest of clamping pressure.

The large jaw opening allows for outfitting the cast jaws with wider, heavier wooden jaws for the increased clamping pressure necessary to firmly secure heavy workpieces. Designed with the woodworker in mind, the built-in dog may be used in combination with a bench dog to offer alternate uses. This vise is easily mounted to virtually any style of workbench and can be used in a configuration of your choosing.

I received my vise yesterday after it had been Bench Vise Quick Release In China back ordered. I had some Woodworking Bench Front Vise View concerns about the quality, specifically the jaw alignment and closure as well the fit and finish. I was extremely pleased to find a well made, robust vise in which the quality seems every bit the equal to the discontinued Record vises.

I have a Record 52 and needed a larger opening vise. The quick release trigger was a bit stiff for my liking, but that was easily adjusted. It was nice to see that a true buttress thread was used on the screw as on the Record vises instead of an Acme thread. The jaws close perfectly with NO miss alignment. I'm a very happy camper. It would be the Jorgenson or Eclipse after on a long search. It was out of stock online so I used Woodcraft's store inventory search and found one at a not to distant store, and they were happy to take my order over the phone and even gave a little discount when I asked for it.

When the vise arrived I was dubious about the quick release lever - it was quite hard to turn. But I installed it anyway hoping that it would be acceptable once the vise was in its actual working position.

No, it was not! I couldn't actuate the lever unless I dedicated one hand to it, and the other on the front jaw of the vise to pull and push it into position. After fretting that I had made a big mistake, I studied the spring mechanism and discovered that it could be easily adjusted, even after installation.

After reducing the torque a little, I am very pleased to report that the vise works like a charm. The front of my bench was riddled with holes so I had to drill two new holes in the face of the rear jaw for long lags into the edge of the bench. Drilling the metal was easy. I attached wood faces with recesses for the heads of the lags. I used double sided tape to secure the wood faces.

I use this vise for professional cabinetmaking and general woodworking. It will probably last forever. This vise is bigger and is just as well made. Before installing, I cleaned off much of the preservative oil that coated the parts by using mineral spirits and a soft cloth. So, the front jaw squeezes against the left front of the bench that I built up to match the jaw.

That's not a big deal for an experienced woodworker. I needed a temporary support from the floor and a helping hand to install the vise and insert the rear jaw into the channel that I had made to accept it. All went well with two people working together as a team.

I do not recommend anyone taking this vise apart to make it easier to install it at the workbench. Directions are minimal. Read this review and others for help as needed. I was looking for a good vise for my new bench. I was tempted to buy a used Record vise, but they command higher prices for some in fair condition.

Eclipse has imitated the Record style for their Chinese-made vises, and came up with an affordable vise with reasonable quality. It comes coated with a lot of grease that must be removed, lest it become clogged up with dust.

This is easy to do with a rag and kerosene. It requires stout mounting screws and, most likely, a wood spacer that you may need to make yourself by laminating plywood, to mount it to the underside of a workbench. The process was straightforward. It will do best by having wood covers for the jaws. My inside jaw is the bench apron, whose underside was hollowed out to accommodate the depth of the inner jaw.

The outside jaw is a full-thickness about 1. Once mounted, I found the main screw does not turn with fingertip strength. This was also true before I removed the grease, so it isn't a matter of lubrication.

These come in two styles: one with steel or cast-iron jaws you can use as is or add auxiliary wooden jaws [ Photos A and C ], and the other with no jaws, requiring you to build wooden jaws [ Photos B, D, and E ].

The first typically costs more, but installs easier. Your benchtop must clear the bench base or legs for mounting. Bolt or screw this type of face vise onto an existing benchtop in less than an hour. You might have to shim it to flush the jaws with the benchtop and notch the benchtop to align the inner jaw with the edge. A pivoting-jaw vise holds irregular-shape stock without racking the jaws.

You also can remove the pivoting jaw for parallel-jaw clamping. Magnet-lined wood jaw pads stay in place without screws. A cast-iron-jaw vise can be recessed into the bottom of a bench for maximum strength and stability. A thick outer jaw distributes clamping force over a wide surface area.

Add shop-made accessories to your workbench. The benchtop or apron serves as the fixed jaw, while the movable jaw travels on a single screw [ Photo F ]. Because the outer jaw has a tongue that slides in a groove on the fixed arm, it has enough play to let you clamp uneven-shaped workpieces. A shoulder vise gives you floor-to-ceiling clamping space between its jaws. A threaded bushing mortised into the vise shoulder unseen keeps the screw on track. And high humidity could cause the parts to swell and bind.

As the name implies, this vise installs into the bench leg, which sometimes serves as the fixed jaw. With a flush-fitting vise, the leg itself serves as a full-length fixed jaw. A leg vise moves via a single Veritas Quick Release Bench Vise screw with a pinned sliding guide rail to maintain parallelism.

The guide-rail pin rests against end-grain hard-maple pads that prevent compressing the softer alder leg of this bench. However, you can build up some legs to make a leg vise work. These mount to the end of the bench and typically work with bench dogs along the length of the benchtop. If you prefer rectangular dogholes, cut those notches in the boards before gluing them to the benchtop; round holes can be drilled before or after assembly.

A traditional tail vise [ Photos H and I ] consists of a rectangular or L-shape block of wood the jaw fastened to a steel or cast-iron fixture that slides back and forth in a cutaway corner of the bench. A long mortise accepts the screw and threaded fixture, and the upper guide rail fits in the slot. A lower guide rail, not shown, mounts beneath the jaw.

The tail vise slides back and forth along the guide rails, held in place by the screw assembly. Too much clamping force, however, can cause boards to bow up. Typically, you use two rows of bench dogs to hold long or wide stock.

Pocket Hole Jig Workstation Guide Circle Cutter Jig Industries Carbide Lathe Tools Tips 100 Dust Suction System Requirements