%!$ Easy Diy Woodworking Bench Plans For You #!@

drawer-lock-router-bit-instructions-kit Rout the drawer front 1. Insert the bit securely in a table-mounted router and set the bit height so the top cutting edge is 3/8" above the table. Note: Use only in a table-mounted router at reduced RPMs. 2. To machine the door front, set the fence 3/8" back from the outermost cutting edge of the bit. Fig. 1. Note: As with other joinery bits, we recommend making testFile Size: KB. High Drawer Lock Router Bit Instructions Set Drawer Lock Router Bit Home Depot Kit bit height and fence depth 1. Set the initial router bit height by using a piece of your stock as a reference. Align the centerline of your stock as shown in Fig. 1. Your goal is to have A and B equal to each other. Note: Use only in a table-mounted router . Nov 27,  · 2) Mount the drawer-lock bit in your table-mounted router, and set the top of the cutter so that it's 15 ⁄ 32" above the tabletop. 3) Calculate the fence position by adding your drawer front's intended overlap (if any) and the thickness of your drawer side. Position your router table fence that distance back from the upper cutting edge of the bit.
Set-up Block available below. 2 flute, carbide tipped. Making strong drawers is easy with our Drawer Lock Bit. Rout the drawer front and sides with the bit mounted in a table. Attach sides to front of drawer with perfectly mated, strong glue joints. Minimum Drawer Lock Router Bit Amazon 900 stock thickness is 3/8" for drawer sides and 1/2" for drawer front. Drawer Lock Instructions (PDF). Jun 04,  · Our Drawer Lock Bit routs a joint similar to a locking rabbet, but the rabbet is wedge-shaped so the parts fit tighter when clamped. A single bit routs both parts of the joint, and is capable of routing joints for drawers with applied drawer fronts, and for drawer /5(). Learn all about # The cleverly-designed Drawer Lock Bit produces both pieces of the drawer joint using a single bit. Drawer fronts are formed horizontally, flat on the table surface. Then, without adjusting the bit height, the drawer side is routed with the work piece standing vertically. The result is a strong, efficient joint between the sides and front of a drawer.

Standard Dowel Rod Sizes Titebond Ultimate Wood Glue Gallon Nano