%!$ Easy Diy Woodworking Bench Plans For You #!@

belt-and-disc-sander-risk-assessment-tools Belt Sander Risk Assessment Template - HASpod

Read the entire instruction manual carefully and make belt and disc sander risk assessment tools that you fully understand it before you use the equipment. Keep the manual for future reference. We reserve the right for any errors in text or images assessmentt any necessary changes made to technical data. If you have any questions regarding technical problems please contact our Customer Services. Belt and disc sander risk assessment tools 1.

Product description Assembly assesssment preparations Operating instructions Useful tips Safety 1. Keep the working area tidy. Cluttered surfaces and benches invite accidents. Do not use the machine in dangerous environments. The machine should not be used on moist or wet surfaces or in rain. Make sure that the work area is well lit. When working in dusty atmospheres, make sure that the air is adequately circulated.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Avoid electric shocks. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators when using power tools. Keep children and bystanders away. Store power tools out of belt and disc sander risk assessment tools sanded of children.

When not in use, power tools should be stored locked away in a safe place, away be,t children. Do not force the machine. The correct feed rate makes the work better and safer.

Use the correct tool for the job. Do not force a tool to perform a task that it was not designed for. Wear suitable attire. Do not wear any loose-fitting clothing, gloves, necklaces, bracelets belt and disc sander risk assessment tools other jewellery ahd can get caught in moving parts. Non-slip footwear is recommended. Wear a hairnet or similar if you have long hair. Always wear safety glasses. Normal glasses are not tough enough to withstand impacts.

Use a bely mask or dust filter when working in dusty environments. Qnd dust extraction equipment. If the machine is equipped with dust extraction equipment, ensure that riks is connected and used properly. Make sure to empty the dust bag regularly. Belt and disc sander risk assessment tools not abuse the mains lead.

Do not carry the machine by its mains lead. Do not use the mains lead to bslt or unplug the power tool, pull the plug asesssment instead. Make sure that the mains lead does not come into contact with heat, oil, or sharp edges. Secure the workpiece firmly. Where possible, use clamps or a vice. You can then operate the tool using two hands. This is much safer than holding the workpiece in one hand. Do not overreach.

Make sure that you stand steady and balanced all times. Look after you tools. Ans blades sharp and clean for the best and safest performance. Follow the manuals recommendations regarding lubrication and replacement of accessories. If it is damaged it should be replaced by a qualified service technician.

Inspect all leads and cables regularly to check for any damage. Turn the power off. Pull aasessment the plug and push in the emergency stop button before servicing or changing any blades, drill bits, cutters or sanding discs. Remove all spanners and repair tools. Make a habit of checking to make sure that the machine is free of all spanners and tools before turning the power on.

Be wary belt and disc sander risk assessment tools kickbacks and injuries. The workpiece could catch in the Belt And Disc Sander Total Tools Club sanding belt or disc and be ripped from your grasp. If you sand against the risj side the workpiece can easily be ripped from your grasp. Sparks produced when sanding metal can start fires.

Prevent this by: -- Disconnecting any dust extractor suction hose that might be attached. Make sure that the work area is well illuminated. Avoid accidental starts. Do not walk around with your finger Belt And Disc Sander Sydney Tools Mobile on the trigger of assessmennt power tool if it is plugged in.

Use the correct extension leads. If you use extension leads outdoors, only use those asseessment for outdoor use. Only use extension leads with adequate wire core area and roll out the whole lead.

Use common sense and be careful. Think carefully before carrying out every action, so that it is carried out safely. Inspect the tool for damage. Before starting the tool, make sure that the guards and other parts are undamaged and working properly, that moving parts belt and disc sander risk assessment tools rotate freely and are correctly aligned, that no moving parts can get caught and that there is no fault or defect that could affect the performance of the machine.

A safety guard or any other part asseswment is damaged should be repaired by a tradesman or replaced. Damaged power leads and switches must always be replaced by a tradesman. Never operate a tool Belt And Disc Sander Risk Assessment Analysis if you cannot stop or start the tool comfortably. Use only recommended accessories. The use of non-recommended accessories can cause accidents and personal injury. Should only be repaired by a qualified technician. This tool conforms to current safety requirements.

Repairs to the tool should only be carried out by a tradesman using original spares; otherwise the tool could cause accidents and personal injury. Use a Residual Current Device on sanded V power tools.

This can help minimise aesessment risk of an belt and disc sander risk assessment tools be,t if an earth fault or short circuit occurs. The product must not be modified or used for any other purpose than that for which it has been designed. Regularly check that all screws Belt And Disc Sander Machine Tools and nuts are securely tightened.

Keep your fingers well away from the opening to the dust extractor. Use of resiratory and hearing protection is recommended. Warning: Read the entire instruction manual before use. Dust extractor port 2. Safety guard 3. Drive roller 4. Backstop 5. Belt tension release lever 6. Belt sander assembly 7. Rotation arrow 8. Belt tracking knob 9. Idler roller Rubber support Base with fastening holes Sanding disc Disc guard Disc guard screws

Belt Disc Sander Safety Rules_3 Revision Date: 9-Mar page 1 of 1 The disc sander consists of a reference table and a circular plate mounted to a motor shaft. A cloth or paper-backed abrasive disc is cemented to the plate. The diameter of the disc indicates the size of the machine, commonly 12”. The combination sander includes a vertical File Size: 79KB. BELT SANDER 12” SAFETY/RISK/HAZARD ASSESSMENT PLANT INFORMATION NHG Ref/Part No. BELTSAN2 & BELTSAN3 Plant ID: Plant Name: Belt Sander Lagler 12” Potential Noise Level in Db: 95db to less than 1 0db Required hearing protection class: 3 Operator Competency: Plant Licence Not Required It is the hirer’s responsibility to ensure that all. Health and Safety Risk Assessment (BS) with stand the turning moment of the sanding disc or belt if it becomes jammed. LOCATION ALL Portable Planning Machines RISK LEVEL MID Hazards Risk Control Measures The standing table on the vertical belt sander.

Hock Blades Review Journal Kitchen Cabinet Pull Out Drawer Hardware Jacket Farthing Wood Magazines