%!$ Easy Diy Woodworking Bench Plans For You #!@

ridgid-r4512-router-table-insert-over The router table insert is still a work in progress, I need to make it longer. After taking the rest of this afternoon finishing all the set up and double checking everything, I have to say setting up the 2 piece guide assembly was a pain. Then trim it out with material wide enough to work with, and re-cut the hole, hable sized. Since the Bench Dog router table is so heavy, there might be a weight issue; does anyone know of a leg set for the R? Reply to this topic If rouger are not comfortable holding down the plate use a scrap piece of wood.

Then use your router to cut the wood. I also made an easel file you can get to here it has all the depths for the cuts. For those with a very large 3d Printer here is the STL , over 15" you might have to shave one of the cutouts to fit your saw.

This is optional, but I added a magnet to the end. The cutout will be already done. Its just a cheap. Got them at home depot in a 20 pack for a few dollars. I used CA glue to hold it in.

To make it fit very snug I added two screws to the end as seen in photo. First I drilled a hole smaller than the screw then one larger than the screw head. If you use a counter sink here you can skip the second drilling.

These make it very easy to get a very snug fit. I used stainless steel, but anything would work here. Ridgid R 10 inch table saw. Cast iron top, 13 amp, v. Great saw, in great shape. Everything works like new. Have zero clearance throat plate and Freud blade installed. Homemade crosscut sled and miter jig as well. Also owners Manual. This table saw is currently VAC at 13amps but owners manual shows how to wire f Rigid r table saw in great condition.

Comes with stock rip fence and miter gauge, also has 3 blades. Has riving knife and blade guard. Is on a moble base to make it easy to move around. Well Cared for table saw. Extra cross cut sleds, and zero clearance inserts. Ready to go to work. This is a Heavy saw with s cast iron top. Ridgid table saw works great. Display as a link instead.

Clear editor. Upload or insert images from URL. Ridgid R modification Reply to this topic Start new topic. Recommended Posts. Dave F 12 Posted November 15, Posted November 15, I'd like to drop in the Woodpecker or Kreg router lift system as well. I'd love to hear you expereinces..

Link to post Share on other sites. Posted November 16, Dave F 12 Posted November 16, That's exactly what I'm talking about. That's very cool Joe. Thanks for posting the pic. Indigogyre 0 Posted November 19, Posted November 19, Dave, I own a r and the manual has a design showing how to build extension tables for the saw.

Join the conversation You can post now and register later.

Cabinet Barrel Locks Not Working Magnetic Cabinet Locking System Data Carving Gouge Sweep Chart Level