%!$ Easy Diy Woodworking Bench Plans For You #!@

make-a-picture-frame-with-kreg-jig-reaction And learning! On this particular model the dept fgame set on the bottom frae the jig using the grey sliding rails on each side of the jig. I agree, The Kreg Jig is great for this type of stuff. Shoot me a picture of some of the projects make a picture frame with kreg jig reaction have used them on so I can show the other readers. Finally here is the finished product being modeled by my shop helper. The Kreg screws use a square head and the kit comes with a long square head driver.

To drill, just place board on the jig, push down clamp, then drill a hole, using a higher clutch speed. I chose to drill in the B hole, since it was pretty centered. Sand rough edges of all boards, glue and clamp smaller piece in between the two longer pieces.

Repeat the same thing for the other side. Wipe on dark walnut stain on front of frame with a cotton rag, let it soak in for a minute before wiping off excess. Using the same rag, wipe on the gray stain on top of the dark walnut stain, allowing the two colors to mix. Wipe off excess after 1 minute. Great tutorial! Your email address will not be published. This site uses Akismet to reduce spam. Learn how your comment data is processed. Step 4- Stain Wipe on dark walnut stain on front of frame with a cotton rag, let it soak in for a minute before wiping off excess.

Step 5- Hang Attach picture hangers on back, hang, and enjoy! Comments Great tutorial! One thing to note with using a single screw is that your wood can spin. I suggest putting glue on the joint and letting it dry, to prevent the finished product from spinning around.

The Kreg screws use a square head and the kit comes with a long square head driver. I typically chuck up the Drill bit in one drill and the square head driver in Make A Picture Frame With Kreg Jig Origin another for efficiency. This will help keep the frame as square as possible. I screwed one piece to the side and did the same with the second piece. With those two pieces attached you have what looks like a U, now attach you last side using the square again to flush up the sides and screw them together and you end up with the completed frame.

The picture above shows the back of the frame. Here is what the front will look like. If you have any questions please feel free to shoot me an email. Do you also use a Pocket Hole Jig.

Shoot me a picture of some of the projects you have used them on so I can show the other readers. This is cool, Grover! Welcome to the fray! I'm totally into new tools that can do amazing things so I'll be watching you. And learning! Thanks for linking up to SNS!

FJ Donna. Thanks Donna and my wife and I love your site. The Kreg tool is a great little tool. I use it for all kinds of joinery. If you have any requests on tools you want to see their use just let me know Make A Picture Frame With Kreg Jig Index and I can put something together. Hi again Grover! Met you over on WiWW and thanks for the very kind welcome.

I also did a book shelf out of red oak some time ago using the Kreg jig but never thought to take a picture of it. I've gotten much better at remembering to photograph my creations! Anyway, I would agree with you that the Kreg jig is a nifty tool and a simple way to do joinery.

It's a great way for folks to start out in woodworking before they have mastered the fancy joinery techniques. But it's also very practical for sturdy construction. I agree, The Kreg Jig is great for this type of stuff. It does offer one the easiest strongest joinery methods I have seen. Not everyone wants to learn to do mortise and tenons or wants to invest in the tools to make it easy.

I became a facebook fan. I'm new to pocket joinery but not to woodworking. In retirement now I look to revive my old love for woodworking and my very first new tool is an R3 small Kreg unit.

Woodworking Projects As Gifts China 14 Inch Heavy Duty Drawer Slides Square Oak Dowel Rods And Buy Kreg Pocket Hole Jig Essays