%!$ Easy Diy Woodworking Bench Plans For You #!@

gel-stain-top-coat-home-depot-model For all the non-winners, no worries, I plan to do more giveaways this year. Another one that was a totally different color before I began. Application on Gel stain top coat home depot model Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. Which translates to easier to use. The best way to get a feel for this type of stain and application is to practice applying it on a scrap piece of wood before you begin your project. For outdoor use when topcoated with a protective exterior clear finish.

For outdoor use when topcoated with a protective exterior clear finish. Surface Preparation All surfaces must be clean, dry and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected.

Wood surfaces must be sanded smooth. Remove dust with a tack rag or a lint-free cloth dampened with mineral spirits. Surface defects should be repaired with an appropriate patching material. Application Stain application varies based on surface material. Please see application instructions below. Application on Bare Wood: Apply stain liberally with brush or soft rag and remove excess, wiping in the direction of the grain. For Gel Stain Top Coat Home Depot Price a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried.

Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet. Wipe brush often on a lint-free rag to remove excess stain. Application over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes.

Application over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. If applying stain exteriorly, top coating with an exterior clear finish is strongly recommended.

Mixing and Tinting Custom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon.

The amount of colorant added may affect its performance and extend dry time. Stir for uniform consistency. Coverage: Approximately 1, to 1, square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately to 1, square feet per gallon. If the surface is porous, coverage is approximately to square feet per gallon. Coverage will vary significantly depending on application method and condition of wood. Drying Time Approximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface.

For additional color depth, a second coat of stain can be applied after 8 hours. Dry time may also be extended due to excess stain application or lack of stain penetration. Cleanup Using a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area.

Check with your local government agencies to ensure proper compliancy. However, this stain can be top coated with most clears. If a lacquer topcoat is desired, test for compatibility before using. When applying water-based finishes, allow a minimum of 24 hours before top coating. Old Masters uses only the finest ingredients to create the highest quality stains available today.

Old Masters stains can be used to:. Stain Scrap test piece Stir stick Drop cloth Bristle brush, synthetic brush, foam brush applicator, cheese cloth, or rags Lint-free cloth Mineral spirits or paint thinner Rubber gloves. Gel Stain.

Available colors:. So, I just sell whatever I create either myself on CL or through a consignment shop here and there. Thank you soooo much for this post!

I ordered a can of General Finishes gel stain a while back but have been rather intimidated to use it. I really want to try it to darken some orangey wood pieces in my home to darken the color, and also Gel Stain Top Coat Home Depot 80 on an antique treadle sewing machine cabinet that just needs a refresh.

I plan to experiment on something small I have around or pick up something inexpensive at the thrift store before I tackle something important. Hi Vicki!

You are so welcome!! I am thrilled this is helpful and inspiring to you. The gel stain will work great on those pieces you have! Trying out a new product and getting a feel for it and how it reacts on a small piece before tackling a large project is really the way to go! Good luck and have fun!! And yes, go do it!!! This post is timely. I have an old chair that belonged to my great-grandmother that desperately needs a makeover.

I still have to figure out how to redo the upholstery which one of our cats made worse by scratching on it but that might be the easiest part of the job. Gel stain, here I come. Can you try it out on the underside anywhere first?

I love seeing all your projects. They are so beautiful! I have a few older pieces of furniture that need some love. I decided to test the stain and the paint on the pieces with a lead test kit and both were positive for lead! I knew old paint contained lead but did not know old stain did too. Do you take any special precautions when stripping old furniture? Thanks so much, Marni! But one big rule of thumb I try to follow on anything old though, is to not create dust, if possible.

If I found that a piece I had was indeed positive for lead. I would not refinish it, personally. Hi Nancy, I love the results you achieved with gel stain. I have used a black gel stain on a mid-century side table that sustained a very small chip to the top wood layer at a top corner that is just big enough and located such that it will be noticeable if it is simple re-stained. Do you have any personal experience with filling and smoothing a blemish like this and using gel stain on top of the filler?

Thank you in advance for any insight you may provide. It may be slightly noticeable but if you fit it well and smooth it out well before it dries for minimal sanding , then you should be able to touch up that small area. Just be sure the wood filler you get is stainable. Will give it a go and carefully shape the filler before re-staining with gel.

I used a gel stain yesterday and did not end up wiping much off. I really liked the look I gave it with the paint brush and only wiping away in some areas. I used Miniwax gel stain Coffee color.

My question is, I left it on in a thicker coat the way I wanted it to cure and look. I left it outside and it was no supposed to frost or dew but it did end up frosting. Most of it still looks great but where the gel is thicker mostly around the sides and end of the table it looks a little water damaged almost. How do i get this off without having to redo the whole table?

Should I try to sand it a little and see if it comes off or re-gel stain it to cover up those areas? Oh gosh, can you possibly send me photo so I can see what happened? I recently acquired a bedroom set in blond wood. Any ideas what colors and ways to achieve this? Hi Sheila!

You can go right over your finish with that. That will give you the base shade. If your wood has open grain is not smooth then you can go over that with a white wax or white glaze.

If you use the white glaze you would want to wipe away excess so it only ends up in the crevices of the wood. Alternatively, you can also use a dark wax or glaze if that is the look you prefer. If your wood does not have open grain you can add that dimension with dry brushing.

Hope this helps! Your email address will not be published. Notify me via e-mail if anyone answers my comment. This site uses Akismet to reduce spam. Learn how your comment data is processed. All Rights Reserved.

Facebook 2 Twitter Pinterest Related Posts: It's My Birthday! French Basket Giveaway! Join the ACR Community! Love Paint? Spring Decorating Ideas that brighten up your space!! Comments Hi Nancy! Yes, pretty much that is what it does.

Thank you so much for your response. It truly is appreciated! Thank you so much, I am excited to try this. Thank you for answering my question so thoroughly. Leave a Reply Cancel reply Your email address will not be published.

Love paint? As Seen In. Do you know your density? Don't Miss a Thing! Don't Miss a Thing!! Want to be inspired, learn new skills, discover all the tricks to furniture makeovers, creating new out of the old and more?

Sign up to get the Weekly Newsletter! Our emails include an unsubscribe link and you may opt-out at any time.

Edmbg Router Bits Review Rockler Barn Door Hardware 90 Woodworking Bench Plans Free Pdf Icon Best 4 Minute Rap Songs Youtube