%!$ Easy Diy Woodworking Bench Plans For You #!@

craftsman-101-lathe-chuck-dress No owners markings. The jaws still move in and out and hold. Used 4 Jaw Lathe Chuck. If you have any questions or concerns before. But to echo others above, disassemble and clean. And happy bidding.

Nice find, you gotta be quick and decisive when you see a deal like that, and you nailed it man! Click to expand PurpLev Active User Registered. Joined Feb 22, Messages I've used WD and paper rags in the past, and recently used simplegreen purple degreaser for some heavier cleaning application on my lathe posted here which worked well.

I would recommend getting a printout of the parts list so that you'll know what to expect, taking each section apart, clean each part, lube it way oil and put it back together again. Nice score Jim! You'll have a lot of fun with it. Spray it on and let it sit for a while then scrub the goo off with a Scotch-Brite pad and a stiff brush.

If there is a lot of varnish from the old lube, alcohol or a spary cleaner like Fantastic will work. For surface rust like on the chucks, go to an auto paint supply and ask for metal prep. It's a weak phosphoric acid solution that will quickly dissolve the rust. Be sure to oil well afterward. That's about all you can do if you don't plan on taking it apart.

Once it's clean, re-adjust the gibs on all the slides and you should be good to go. I would look for a larger motor though. When you get it all cleaned up, your first project should be the carriage stop I designed for the Atlas lathe. Have fun. Last edited by a moderator: Mar 22, AR Active User Registered.

Joined Nov 5, Messages Those are very nice little lathes. I'm on my 4th and nicest , but yours is nicer than mine. I have bigger lathes, but for small stuff I like a small machine. My current problem is which to sell, my 7x14 minilathe nicest ever or this I'll probably keep the Atlas. But to echo others above, disassemble and clean. Section at a time. I also recommend WD For rust I use Evaporust, which is harmless to everything except rust, and works like magic.

Gray Scotchbrite is fine on the unpainted surfaces such as the ways, aided with some WD Don't be tempted to repaint yours, it looks fine. Clean, lube assemble, lube again, and wipe down. Take care in getting the gibs as flat as possible, polishing on a flat plate and sandpaper as needed, then adjusted as good as possible. Front and rear of saddle in particular, then cross-slie and compound. If you found plastic gibds, replace immediately with metal ebay Do check the carriage traverse gear assembly.

It's behind the front of the apron, opposite the big handwheel shaft. Someone is making milled aluminum replacements, check ebay. Nice lathe, enjoy it and preserve it for the next generation. Bill L. Active User Registered. Joined Mar 6, Messages Here is a link to a article on removing the spindle to replace the belt or bushings. Read it carefully as there are some set screw burs you need to file down. StonewellMark Active User Registered. Joined Mar 12, Messages I use "lectra-motive" as a cleaner.

CRC makes it, and it has never hurt the paint on my stuff. Nice Lathe by the way! My first was an Atlas MK2. I would recommend getting a printout of the parts list so that you'll know what to expect. If you found plastic gibds, replace immediately with metal ebay. Bid early and often! Please check out my other listings! Nice condition. Has been disassembled. Cleaned and re-l ubricated.

Works smooth as butter. Has a few nicks around the bore. See pictures for details Please see my other listings for more lathe parts. Craftsman 4" 4 jaw lathe chuck 1"x10tpi. Nice old chuck. It has been completely disassembled, cleaned and oiled, and then put on a shelf before any use because I got a bigger lathe.

All of the threaded parts are in great shape and turn freely, the backplate is threaded 1"x10 tpi and will fit most Craftsman or Atlas lathes.

If you are not sure what thread pitch your machine has, feel free to contact me and I will walk you through figuring it out. Thanks in advance. Nice Dunlap 4" 4 Jaw chuck in clean lightly used condition. No major damage from collision with tooling. There is slight freckling on the jaws and a few small pits on the backplate. The jaws show very little wear. They move smoothly and can be reversed. Diameter 4" Length approx 3" from jaw face to end of backplate.

Allen wrench is used for key Not included This should fit any lathe with a male thread. Description Thank you for your interest.

We would like to take this opportunity to thank all of our repeat buyers or those finding us for the first time for shopping with us. We try very hard to bring you honest. Friendly, and great service. We appreciate all of our buyers that do the same. This is our business and we take it seriously. We will do our best to assist you. We are not always in front of the computer but will try to get back to you asap.

Thank you! As always. Please check your measurements before you bid. USPS have increased their prices once again. No owners markings. This will also fit other lathes such as a logan or south bend. If you find the item incorrectly described or not what you want. Please contact me within a week of receiving the item and I will refund the full item price, not including shipping, when it is returned.

I'll gladly entertain alternative shipping methods other than those listed in the description. Welcome to my site! I try to describe items as accurately as po ssible through photos and written explanation. The chuck has some damage. All of the keyholes have damage to the threading inside. The jaws still move in and out and hold. When all the jaws are closed the tops are not completely flush and there are some nicks and scratches on the tops of the jaws. Please see photos. I tried to capture all of this in the photos, but it was difficult.

The insides of the jaws where they meet the work look good. The rest of There are a few small scratches and nicks here and there.

The threading where the chuck mounts to the headstock looks good. My goal is NOT to make money on shipping. But rather, to offer buyers the cheapest. Saf est. And quickest shipping possible. If you have any questions or I can be of any help. Please ask and I will respond quickly! Item can be returned within 14 days of purchase.

Purchase Price will be promptly refunded after I receive the item in the same condition it was sent in. Item will be packaged with care and will ship quickly. I always ship out items within 1 business days after payment is received. I take my shipping and packaging seriously! Please see ratings. I am proud of my feedback and want buyers to buy with confidence.

If you have any questions. Please feel free to ask, but please do so prior to purchase. If you have any questions or concerns before. During, or after purchase please don't hesitate in cont. Atlas, Craftsman, 4" Lathe chuck 1" 8 Threads per inch. Also included is extra set chuck JAWS.

No chuck key needed. NO international. Please look at pics,They give the most information. Chuck is in excellent shape and the jaws function very well.

There is no surface rust in sight and it comes with all of the pictured hardware. I took it apart and cleaned it up as it has been in my tool bench for many years. Craftsman part number is This product was made in the USA. A rare sight these days for a Craftsman product, and the quality and weight of it speaks volumes in that.

Good used Cushman metal lathe chuck. This came of 9" South Bend lathe. I outfitted mine with a larger diameter chuck. I only have the external jaws pictured with the chuck. Should fit a variety of metal lathes such as South Bend. Logan, Atlas, Craftsman,. Made in England. No name on it but looks too old to be an import.

Union Model H. I accept Paypal. Always buying and selling fine tools for the machinist and woodworker. Specifications: Jaws: 4. Chuck Diameter: 4" Thread Mount: 1"8 tpi. To go to The Manufacturers Website: Check out the photos!

Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. Thread mounting diameter is 1" x 10 TPI. Threads are in very fine order. Unit was acquired without key. Jaws move smoothly throughout range. Very nice original chuck in excellent condition, as shown. Thread mounting diameter is 1" x 8 TPI.

Threads are in fine order. All in fine order, as shown. A few file marks noted to body. Operates smoothly throughout range.

Smooth working, face has a few marks from use, includes key. Only the set of jaws shown is included, the Buck Model No. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven 7 business days from end of auction shall deem the item abandoned by the awarded bidder unless other arrangements have been made with us, just call or email Any deposit or payment issued by that bidder is considered non-refundable.

Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc.

International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay. Accessories and general industrial surplus. Powered by. Jaws are independent and reversible. Good size for a Atlas or Craftsman 10" or 12" lathe. A few marks from use, one on an individual jaw see last photo that does not effect use.

Failure to collect any items purchased within seven 7 business days from end of auction shall deem the item abandoned by the awarded bidder unless other arrangements Both sets of original jaws and key. I have disassembled, cleaned and lightly greased internals, if you are not happy with this chuck you can send it back for a full refund and I will pay the return shipping US ONLY Good chuck for a Atlas or Craftsman 10" or 12" lathe as well as a South Bend or Logan 9" lathe.

Failure to collect any items purchased within seven 7 business days from end of auction shall deem the item Craftsman 4-jaw Lathe Chuck This is a Craftsman 4-jaw lathe chuck. The plate measures 4" across and includes the chuck for adjusting the jaws. It mounts on a 1" shaft and. Besides being a little dirty from storage, is in very good condition. Smooth operation throughout range. Very nice chuck, as shown. Beautiful condition 4 independent jaw chuck! Fits atlas. Logan, south bend, craftsman 1 x 10 TPI 4" diameter rarely used in fantastic condition from the estate of an old machinist.

Keep your eyes peeled! More to come soon! Set of Three 3 replacement Lathe chuck jaws! They look like the Craftsman listed. Atlas Craftsman " lathe 4 jaw chuck- This is in every good uncleaned. Undoctored condition- No hits or abuse Good serviceable tool No Reserve. Will probably ship well in a mediaum flat rate box if i remove jaws.

I will combine shipping on multiple purchase- and will invoice at end of auction. You are looking at a Craftsman 8" 4-Jaw Chuck. Model The chuck is in good condition. Jaws are also in good condition and they turn smoothly. The weight of the chuck is 22 lb and Includes original key. I made 17 photos click on the photos to enlarge Please view the photos below carefully.

To see the condition of what is being sold. There might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper. Then I will return the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you for looking. I believe the original would have been 1"x12 to fit Walker Turner lathe.

Offered is a Skinner Lathe Chuck. Chuck is in overall excellent used condition. Key included. Was previously used on a Logan 10" Should also work with Atlas, Craftsman, and any other that utilizes the 1.

Watson Mfg. Original Atlas Craftsman Lathe 4" 3-Jaw Chuck Nice self centering scroll jaw lathe chuck with some minor scratches. Stains and dings. Made for the Craftsman 6" lathe. It is made in England and has threads. Operates smoothly. Comes with the T-handle. If by chance the item does not match the description returns will be accepted and the same items must be sent back within days after delivery date with return shipping and insurance paid by the buyer.

Please email with any questions. You are bidding on a set of 3 Outside lathe chuck jaws. The dimensions of them are 1. They look like they are brand new. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. Please email me for combined shipping rates.

For craftsman lathe. Listing includes key as shown. In excellent condition, as shown. Seems to be in good shape. Has some rust, it came with a old Craftsman 6" x 18 metal lathe. I can not find a name on it. If you need more pictures or have any questions send me a E-mail or call Independent chuck. Includes Key.

It come from a Craftsman chuck That want to a

Antique Woodworking Tools Near Me Coupon Super Dust Deputy Deluxe 01 Do It Yourself Wood Planter Boxes 20 Small Wood Sanding Machine Manual