%!$ Easy Diy Woodworking Bench Plans For You #!@

low-angle-jack-plane-for-sale-40 Click here to download a PDF copy of the instructions for this tool. To help put things in perspective, Low angle jack plane for sale 40 am using brand new retail values from Lie-Nielsen. The Cherry knob and handle are oiled and buffed with wax to produce a natural finish. Our heat treating technique ensures that the blade will take and hold a very fine edge for a long time. The trick to getting the most out of this plane is to have multiple blades honed to different angles for a variety of tasks. With the bed angle of 12 degrees, this gives us an effective working angle of 42 degrees, which is very close to a standard bevel-down plane 45 degrees.

At 14" long, the No. The No. For the best finishes, use a very sharp blade set to take a fine cut. The mouth opening should be no larger than necessary to pass the chip.

When you want to cut more aggressively, open the mouth more and advance the blade for a deeper cut. For best results on end grain, set the blade and mouth fine. Blade adjustment is simple, direct and positive.

Hold the tool in one hand with your thumb on the cap. Loosen the cap iron thumbscrew all the way, then tighten slightly until there is a little resistance. Adjust depth of cut with the stainless steel nut. Sight down the base of the tool from the front, and judge depth and squareness of blade by the thin dark line of the blade showing against the sole as it protrudes. When you are done, snug the cap thumbscrew. Do not overtighten.

Make sure the mouth is adequately open before advancing the blade to avoid damaging the edge. Adjust with the brass lever. Tighten the knob again firmly, but do not overtighten. The Low Angle Jack Plane intentionally has very little lateral adjustment of the blade.

This is an advantage. As you adjust the blade, it will track squarely with the sole. The disadvantage is that you must sharpen the blade square. We recommend using our Honing Guide to make this easier to do. The body is cast from Ductile Iron, a very strong alloy that will take a lot of abuse.

These castings are fully stress-relieved, a process that removes inherent stresses and ensures that the tool will remain flat and true.

The cap is Manganese Bronze. Other parts are Brass, Steel and Cherry. Our heat treating technique ensures that the blade will take and hold a very fine edge for a long time.

After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very quickly. The thick blade provides solid chatter-free cutting. The sole is ground flat to. The cap iron can be polished with any good brass polish, or allowed to patina with age and use.

Occasionally, the tool should be disassembled, cleaned, and moving parts oiled. The blade should be kept lightly oiled to prevent rust, especially when the tool is not in use. Iron tools are cast from Ductile Iron, a very strong alloy that will take a lot of abuse. These castings are fully stress relieved, a process that removes inherent stresses and ensures that the tool will remain flat and true. The blade is A2 cryogenically treated Tool Steel, hardened to Rockwell and double tempered.

Our heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very quickly. The thick blade provides solid chatter-free cutting. The cap is Manganese Bronze. This plane comes with a new and improved Stainless Steel yoke installed in the Frog.

The Steel is stronger than Bronze and will be more resistant to wear over time. All Bench Plane bodies are surface ground flat and square to a tolerance of. Tools with Iron bodies should be kept lightly oiled or waxed to prevent rust. We recommend Jojoba Oil , a plant based oil product that is non-toxic, odor-free and easy to use. Also, in our shop, we use a fine abrasive handblock to remove any light surface oxide from tool bodies and blades.

Jojoba Oil and abrasive handblocks are available from us. A light oiling on the threaded rod, the Brass adjuster nut and the lateral blade adjustment lever will keep them moving freely. Many people like the patina that Bronze gets with age and use, but if you wish to keep the finish bright, a little brass polish is in order.

The Cherry knob and handle are oiled and buffed with wax to Veritas Jack Plane For Sale Shoes produce a natural finish. Wipe with oil as desired to refresh. Find everything you need for tool care. Materials and workmanship are guaranteed for the life of your tool. Call for repairs or replacement parts. We are available for advice if you ever have a problem using your tool.

Bronze and brass alloys contain lead, a chemical known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling. Planemaker's Floats Joinery Floats. Plane Socks Leather Tool Cases.

Workbenches Bench Accessories.

Shank Router Collet Mac How Do Wood Dust Collection Systems Work