General Finishes Gel Stain Instructions Co,Custom Electric Branding Iron,Mallet Hammer Near Me Usa,Makita Multi Tool 18v With Battery Video - Plans Download
When we finally got General Finishes Glaze Effects Over Gel Stain Jack our hands on some, the wonderful, furniture-restyling ninja, Kerri documented her first experience with the highly anticipated product. General Finishes Gel Stain is an oil-based stain that can easily create a lustrous finish. Initially, it was formulated to enhance raw wood, allowing a layering of colours but can also be used over existing finishes.
Gel stains are thicker in consistency than liquid oil-based stains. This means no drips, runs or spills! Apply gel stain liberally and wipe off excess stain with a cloth or high quality paper towels. Wipe with the grain, blending any adjoining areas. Additional coats will darken the initial coat.
Painting Stain On: This method is normally used if a very dark painted look is desired. Dry brush on sparingly the first coat. Brush on the second coat heavily with a bristle or foam brush and then dry-brush the excess stain off with a clean brush.
Using the flat part of a dry bristle brush slightly angled brush across and feather out in the direction of the grain pattern. Additional coats will give a darker colour. Start by ensuring your piece is free of dust. View our cleaning infographic here. Lightly sand the piece only to scuff the surface, not to remove finish.
Follow by wiping with a tack cloth or damp rag to remove fine dust. Mix the gel stain well with stir stick. It is best to wear gloves and an apron or old clothes as this product is difficult to remove from fabric. Using a foam brush, apply a liberal amount of stain to the surface following the grain of the wood. As you get the product off the surface then start going with the grain.
Check your surface to see if you missed anything and that's all it takes! We will let this dry overnight and I'll be back to show you how to apply the first coat of Gel Satin Topcoat. I am back with a stained table leaf that has dried. Let's put down the first coat of Gel Satin. Because Gel Stains have such a high solid content they look like they don't need a sealer but they really do.
Think of stain as color and top coat as protection. Protect the color! Get my gloves on and we'll get started. Put it out in a thin coat. The objective of this first coat is simply to seal the surface.
Clean these off with just a light polishing motion, not removing too much of the finish. Using this staining brush I am going to just let it drag on the surface.
One last pull across. So that's how to apply the first coat. We will let this dry overnight. Here is the table leaf with one coat of Gel Satin that has dried. First, sand down the surface with a sanding pad.
Knock down the finish, staying with the grain. If you had edges and detail on your piece you'd want to go soft so you don't cut through to the stain. Wipe off the dust. Just get it out on the surface and move it around. Just a little bit of finish here. Use that for a polishing pad. This is a really light wiping.
Best 80s Rap Songs 01 Metal Child Safety Cabinet Locks Model |
elnare
28.11.2020 at 16:32:41
4irtanka
28.11.2020 at 21:31:47
BakuStars
28.11.2020 at 14:22:19
ARXANGEL
28.11.2020 at 21:53:34