Laguna Suv 14 30,Jointer Plane Cheap Zone,Open Hardware Wifi Router Ip,Woodworking Projects Using Pallets Australia - Plans Download
Adjusting the tilt is a two handed operation, as the table is heavy enough that it will fall fairly heavily back to its positive stop if you let go of the adjustment knob without the locking knobs tightened. The tilt control knob is smooth, a little bit small and a little slippery to grip, but it gets the job done. When tilting the left side of the table down, the positive stop swings out of the way to allow the table to drop down. Swinging the positive stop back into position, the table reliably returns to square with the blade.
The cursor Laguna 14 Bandsaw Suv 10 on the tilt, like the cursor on the fence, suffers from parallax. I am generally happy with the dust collection on this saw. I never bothered to install the wooden baffle that the instruction manual recommends for the front dust port. Dust collection has to wrap around the machine.
The one improvement I could suggest for this machine would be to put the front dust port on the outfeed side of the machine. I have no idea why so many band saws have their dust ports on the front of the machine like this, as it pretty much guarantees degree turn to reach the dust collection pipes.
One happy surprise was that the ports on this machine fit snugly inside a standard mm PVC street elbow. On the bottom connection, I used a Hold Tite hose so that I could shape it to avoid contact with the motor. The rest of the dust collection fittings were cobbled together from scraps of hose and fittings I happened to have on hand.
There are two four inch dust ports on this saw, but if you look closely, the airflow on each is restricted to some degree. Laguna was running a promotion on this saw at the time of my purchase that included a lift-bar mobility kit for free. This mobility kit seems to be common to many European-designed machines, and it is absolutely not for me.
I suppose it works, but in a tightly packed shop like mine, the main reason for needing mobility is to make room for the dozen other things that are getting moved around on a regular basis.
As a matter of personal preference, I would never have bought this mobility kit, at any price. This a heavy duty saw with great power and capacity, and it appears to be built to last. Thanks for a great write-up. Or for that matter any significant piece of machinery. Solidified my decision to get one after a long thinking process. Thanks again. What is the overall height of the saw?
I have limitations on how high the unit can be. Thank you. There are two high points on this saw. The other high point is the tension adjustment crank, which is on top of the body of the saw. Interesting issue with the power cord.
Not being an electrician, it took me a while to get the right circuit set up for the machine. As you noted, the plug on the machine is for a 20 amp circuit, yet Laguna recommends a 30amp circuit. When I called in to Laguna about that, there was actually a suggestion to cut the plug off.
The other issue I have had is sparks. I see you noted the issue in your blog. Do we know what is causing that? Should I be concerned about it?
As you mentioned, hardwood slides through effortlessly. I have been milling up some haliburton cherry that I have had sitting on the front porch for five years….. Built using WordPress and the Materialis Theme.
Making Splinters. About Website Terms of Service. Shipping grease I gave up on. The fence is rock solid. A log that was cut vertically. Blade guides with table insert removed.
The tension lever is easy to operate. Dust collects a bit in the door and corner. Comments: 4 Add comment. Jay Mack says:. January 3, at pm. Vern says:. April 26, at pm. April 27, at am. Mike M says:. May 11, at pm. Previous: Previous post: Walnut Pedestal Desk. Under 2 - Slow, under powered. Sailboat Rigging Diagram. Toggle Navigation Menu Home. Hull Type:.
Capsize Screening Formula:. Mast Height from DWL:. Sailboat Links. Shad Turner. Laguna Yachts. Download Boat Record:.
View All Topics. Create Topic.
Pocket Hole Jig Uk Screwfix 10 Kreg Table Saw Rip Fence Yield Open Hardware X86 Usb |
118
06.05.2021 at 17:51:39
44
06.05.2021 at 11:33:53
cedric
06.05.2021 at 11:34:14
PANCHO
06.05.2021 at 22:55:35
Sevsen_Severem
06.05.2021 at 14:31:56