Belt And Disc Sander Risk Assessment Analysis,Woodwork Workshop Brunswick Institute,Jet Band Saw 10 Inch 30,Rockler Router Plate Opposite - Easy Way
Access to internal area of machine. Fixed guarding encloses all transmission and associated moving parts LOTO protocol implemented and maintained. Work piece thrown from the machine. Work table or rest is used to guide work piece during sanding Safety glasses are worn by the operator. Variation in material size, shape and weight. Store raw materials at appropriate height to avoid the need for bending or twisting Use a second person or trolley to guide a long or large piece from the machine.
Obstructed or cluttered work area around the machine Slippery and uneven floor surface. Maintain a clear work space in and around the machine Provide non-slip floor surfaces that give a firm foothold. Provide and maintain local exhaust ventilation Wear protective personal equipment PPE such as face masks Regularly vacuum dust and sawdust Note: DO NOT use compressed air to remove dust from skin or clothing.
Book An Appointment Today! Schedule an Appointment Online Click Now. Safety Rules for the Disc Sander. Always wear proper eye and ear protection, and a dust mask. If you're doing a large amount of sanding, you should wear a respirator. Don't turn on the power with the stock laying on the worktable or already in contact with the disc.
Never reach over the disc or behind it while it's running. Always sand on the downward motion side of the disc Figure The rotation helps to hold the workpiece against the table.
If you sand on the upward motion side, the disc will lift the piece off the table and cause a kickback. The one exception is when you use the quill to advance the disc. The rotation of the disc may lift wider boards off the table. When you use the quill feed to advance the disc, attach the quill feed lever to the side of Grizzly 6x9 Belt And Disc Sander Edition the power plant where you can reach it most easily.
Always use the worktable; add the extension table if necessary. Never sand without a table supporting the stock. When using the quill feed to advance the disc, back up the stock with the rip fence. If the stock is too long to backstop, clamp the stock to the worktable or extension table. Close [X] Welcome to Shopsmith. Address Line 2. Western Sahara Yemen Zambia Zimbabwe. They will Call you Back.
If your equipment is under Warranty , call our Customer Care Line at at no charge to you.
Pumpkin Carving Kit Tool Names List Olson Scroll Saw Blades Amazon 00 |
morello
25.09.2020 at 19:20:58
RAZINLI_QAQAS_KAYFDA
25.09.2020 at 11:34:26
YERAZ
25.09.2020 at 20:35:19
sakira
25.09.2020 at 15:42:17