%!$ Easy Diy Woodworking Bench Plans For You #!@

adjusting-blade-smoothing-plane To make the first adjustment, turn the plane upside down with the bottom about eye level. Turn the brass knurled nut until the plane iron appears just beyond the bottom of the plane. Then, with the lateral adjustment lever, move the blade to one side or the other until it is parallel to the bottom. Apr 09,  · Put the parts back together and turn the adjustment wheel until the blade touches the wood when you test it on the edge of a scrap piece of wood. Move the plane across the surface to see if shavings appear, if not keep adjusting the wheel until this happens. Removing the blade Turn the adjustment screw backward slightly. Loosen the tension screw nut at the back of the plane body. (Do not remove). With your fingers, take hold of the opposite end of the tension screw in the chip box and turn it 90°. Lift the lower end of the plane iron off the tension.
Jun 09,  · On your bench plane, unscrew and remove the frog and all of its hardware, including the lever cap bolt on the front and the adjustment plate and screw on the rear. Taking care not to damage the tip of the yoke that engages the iron and cap/iron, carefully sand the face surface of the frog until it is as flat as possible. Removing the blade Turn the adjustment screw backward slightly. Loosen the tension screw nut at the back of the plane body. (Do not remove). With your fingers, take hold of the opposite end of the tension screw in the chip box and turn it 90°. Lift the lower end of the plane iron off the tension. To make the first adjustment, turn the plane upside down with the bottom about eye Smoothing Plane Blade For Sale level. Turn the brass knurled nut until the plane iron appears just beyond the bottom of the plane. Then, with the lateral adjustment lever, move the blade to one Adjusting Blade Smoothing Plane Table side or the other until it is parallel to the bottom.

19 Drawer Slide Table Band Saw Blades For Cutting Logs Pdf