Woodworking Plans Pencil Box 85,Chop Saw Digital Tape Measure 90,Best Routers For Woodworking 2019 Qual,Wood Inlays For Furniture Program - New On 2021
Finally, I cut the short end of the box off to allow the spot for the lid to slide in the groove at the end of the process. I lined up my parts on top of some blue tape. I then applied some glue to the joints. Finally I added the bottom to the bottom groove and began rolling it up.
I rolled it up with ease. The jig I made helps make sure everything is lined up as it should. Now I checked to make sure the joints were all tight and I set it aside to dry. For the lid of the box I used a piece of figured walnut. I scribed a line in order to resaw it. I then resawed the work piece in two.
And then took it to the table saw to cut it to final width. I set my router table up to cut the rabbets for the top. This would cut away just enough so the box slides nicely in between the two sides of the box.
I ran my top across the bit to create the rabbets for the lid of the pencil box. To prevent tearout, I used a backer board for the end grain cuts. I then glued on a mitered key with CA glue. This would fill the void where the lid will slide into the open Woodworking Plans Pencil Box Zero end of the box and lock it in position.
Once I slid the lid into the grooves I sanded the key flush with the side of the box. I love the raw wood feel it gives and the silky smoothness of the wax is great to the touch. Once I finished the inside and outside of the box I made sure to get the lid too. I just filled this box with my favorite writing pencils.
Well that closes the lid on this pencil box project! A great use of scrap wood if I say so myself. If you enjoyed this tutorial and found it helpful, you can see more of my work in the following places:. Introduction: How to Make a Pencil Box. By mwawoodworks Subscribe to my YouTube Channel! More by the author:. You need to cut a big arc or wheel out of a sheet of plywood, but you know that a handheld jigsaw Skip to main content.
Boxes and Baskets. Pagoda Box Woodworking Plan. Humidor or Keepsake Box Woodworking Plan. Jewelry Box Downloadable Plan. Beautiful Bandsaw Boxes Woodworking Plan. Decorative Keepsake Box Woodworking Plan. Lacewood contrasts with walnut on a long, low box you can build in a weekend. Wood-hinge Box Woodworking Plan.
Though easy to make, jig routed half-blind dovetails only show one side of a box corner.
Gyokucho Japanese Hand Saws Pro Build A Wooden Shooting Bench 10 Wood Hand Planes Diy |
qedesh
19.06.2021 at 21:14:40
ftgbfrt
19.06.2021 at 23:45:21
nazli
19.06.2021 at 23:18:30
SEX_BABY
19.06.2021 at 13:27:14