%!$ Easy Diy Woodworking Bench Plans For You #!@

porter-cable-jig-saw-model-7549 Porter Cable Bayonet Saw | | www.-

The Model and Serial No. Record these numbers in the spaces below and retain for future reference. Calbe No. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage.

There are certain applications for which tools and equipment are designed. If you have any questions relative to its application DO NOT use the product until you have written Porter-Cable and we have advised you. Online contact form at www. Department of Labor regulations www. The symbols below are used to help you recognize this information. Some examples of these chemicals are: lead from lead-based paints crystalline silica from bricks and cement and porter cable jig saw model 7549 masonry products arsenic and chromium from chemically-treated lumber Your risk from these exposures varies, depending on how often you do this moddel of work.

The term "power tool" in all of the warnings listed below refers to your mains-operated corded power tool or battery-operated cordless power tool. Cluttered or dark areas invite accidents. Power tools create sparks which may ignite the dust or fumes.

Distractions can cause you to lose control 2 Electrical safety a Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock b Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is cabel or grounded. Water entering a power tool will increase the risk of electric shock d Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords portsr the risk of electric shock. Use of a cord suitable for outdoor use reduces the risk porteer electric shock.

Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard 7459, or hearing protection used for appropriate conditions will reduce personal injuries. Ensure the switch is in the off-position before plugging in.

Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. Use of these devices can reduce dust-related hazards. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

Such preventive safety measures reduce the risk of starting the power tool accidentally. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition pogter may affect the power tools operation.

If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting porter cable jig saw model 7549 are less likely to bind and are easier to control. Use of the power tool for operations different from those intended could result in a hazardous situation. This will ensure that the safety of the power tool is porter cable jig saw model 7549. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

Use clamps porter cable jig saw model 7549 other practical way to secure and cabe the workpiece to a porter cable Porter Cable 12 Dovetail Jig Model 4210 Data jig saw model 7549 platform.

Holding the work by hand or against your body is unstable and may lead to loss of control. Keep blades sharp. Sharp blades will do the job better and safer. Keep hands away from cutting area. To avoid injury when sawing never reach underneath or behind the material being cut for any reason. When you have finished a cut be careful not to come into contact with the blade. Turn off the motor immediately to avoid injury.

Exercise extreme caution porter cable jig saw model 7549 blind cutting. Be certain that there are no foreign objects such as electrical wire, conduit, plumbing cablee, etc. Never hold work in your hand, lap, or against other parts of your body when sawing. Such preventive safety measures reduce the risk of injury. Some wood contains preservatives which can be toxic.

Take extra care to prevent inhalation and skin contact when working with these materials. Request porter cable jig saw model 7549 follow any safety information available from your material supplier.

IP symbol. Several models, however, are designed for A. Refer to the specification plate on your tool for proper voltage and current rating. Do not operate your tool on a current on which the voltage Porter Cable Jig Saw Guide is not within correct limits. Do not operate tools rated A. To do so may seriously damage the tool. A table of recommended extension cord sizes will be found in this section. If an extension cord is to be used outdoors it must be marked with Porter Cable 12 Dovetail Jig Model 4210 Kit the suffix W-A or W following the cord type designation.

You will not only get better performance, but your blades will last longer and a smoother cut will result. A wide assortment of Porter cable jig saw model 7549 blades are available from your supplier. It is recommended pirter you obtain a cabld assortment so you will always have the correct blade at hand for any job you might choose to do.

Blade clamps are factory assembled to accept Porter-Cable Hook type blades. No assembly time or tools are required. Installing the blade does require a flat tip screwdriver. Loosen two guide screws, Fig. Slide both blade guides towards edge of base to provide clearance for blade. Loosen blade screw, Fig. NOTE: It may be necessary to lower the blade holder shaft by rotating the motor fan with a porter cable jig saw model 7549. With teeth facing forward, insert blade up into clamp as far as it will go.

Tighten blade screw approximately one turn and pull down on blade. Blade should not pull out of clamp. Tighten blade screw securely. Slide both blade guides, Fig. Tighten guide screws securely.

NOTE: Blade guides can be used to set blade squareness to sxw base, but clearance must be maintained between one blade guide and the blade. Do not clamp blade guides tightly against blade. To do so can cause blade to shatter and possibly result in personal injury. NOTE: The blade porter cable jig saw model 7549 are reversible to provide additional wear surfaces. When reversing guides, left porter cable jig saw model 7549 becomes right guide and right guide becomes left guide.

Use of setting 3 may cause blade breakage. It is necessary to raise and lower the blade holder shaft to perform the following operations. This is accomplished by rotating the motor fan with a screwdriver. Loosen clamp screw six to eight turns and remove porter cable jig saw model 7549. NOTE: It may be necessary to raise the blade holder slightly to remove the clamp. Insert screwdriver behind blade holder shaft, see Fig.

Model # Porter Cable jig saw Here are the diagrams and repair parts Porter Cable 12 Deluxe Dovetail Jig Combination Kit Model 4216 for Porter Cable jig saw, as well as links to manuals and error code tables, if available. There are a couple of ways to find the part or diagram you need. View and Download Porter-Cable instruction manual online. Welcome to ManualMachine. Bayonet Saw. To learn more about Porter-Cable visit our website at: The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in . Find many great new & used options and get the best deals for Porter Cable Jigsaw For Parts- Works at the best online prices at eBay! Free shipping for many products! Porter Cable /2" x 10 TPI Jig Saw Blades for Wood (5 Pack) (Hook Shan. $ Free shipping. This item may be a floor model or store return that has been Seller Rating: % positive.

Cool Wood Fence Ideas Us Makita Planer Jointer 92