%!$ Easy Diy Woodworking Bench Plans For You #!@

r4512-router-table-github Are you looking table saw? Now we discuss one of the best Ridgid Table Saw R reviews. I think if you use this iteam you will easy to working always   Which is one of the affordable tables saw models boasting great practicality. In this article, we will be providing the capability and specifications that make this model better than the others. It is unfortunate to say that many people rush to the market only to end up purchasing low-quality tools leaving them dissatisfied. Ridgid Table Saw Features and specifications. Motor power- 13 amperes. Corded design. I'm in the depths of a shop re-org project(s) (adding cabinets, rearranging everything, cleaning) and I realized that it nearly fits perfectly into the Ridgid R table saw as a table extension. I went ahead and removed all the extraneous parts of the router table and cut some mounting bracket pieces. It took drilling some custom mounting holes in the router table to match the mounting holes on the table saw, but now it's a perfect fit! I also removed the power switch from the router table and mounted it on the side of the table saw. Since I rarely joint on the router, I'm. Showing r router table Related Routers Here. Below are r router table related routers.  TrendNET TEG-S16DG Unmanaged Desktop Gigabit GREENnet Switch 10//Mbps 16 x RJ45 8K MAC Address Table. Format: External Standards: IEEE 10Base-T IEEE u Base-TX IEEE ab Base-T IEEE x Flow Control IEEE az (draft ) 1 2 3 4 5 6 7 8 9 10 11 . I spilt the finish of r4512 router table github torsion box into two halves. Note that reverse queries ie looking for names, given addresses are not affected. Thanks to Tsachi Kimeldorfer for championing bithub. So, adding. Fix foobar in rrfilter code, that could cause malformed. Within 30 minutes I had the hang of it using some shims under the machine where required on the table leg faces and had the domino mortices cut in short order.

Fix option parsing for --dhcp-host, which was generating a spurious error when all seven possible items were included. Thanks to Zhiqiang Wang for the bug report. Remove restriction on prefix-length in --auth-zone. Thanks to Toke Hoiland-Jorgensen for suggesting this. Log when the maximum number of concurrent DNS queries is reached. Thanks to Marcelo Salhab Brogliato for the patch. If wildcards are used in --interface, don't assume that there will only ever be one available interface for DHCP just because there is one at start-up.

Thanks to Natrio for the bug report. Thanks to Damian Kaczkowski for spotting the problem. Fix crash with empty DHCP string options when adding zero terminator. Thanks to Patrick McLean for the bug report. Allow hostnames to start with a number, as allowed in RFC Thanks to Kyle Mestery for the patch. Thanks to Roy Marples for the patch.

Make --clear-on-reload apply to setting upstream servers via DBus too. When the address which triggered the construction of an advertised IPv6 prefix disappears, continue to advertise the prefix for up to 2 hours, with the preferred lifetime set to zero.

This satisfies RFC 4. Thanks to Uwe Schindler for persuasively arguing for this. Thanks to Brad Smith for the bug report. The lease time of the smallest valid dhcp-range is sent. Thanks to Uwe Schindler for suggesting this. Make --listen-address higher priority than --except-interface in all circumstances. Thanks to Thomas Hood for the bugreport.

Provide independent control over which interfaces get TFTP service. If enable-tftp is given a list of interfaces, then TFTP is provided on those. Thanks to Lonnie Abelbeck for the suggestion. Add --dhcp-relay config option. Many thanks to vtsl. Fix crash with empty tag: in --dhcp-range.

Thanks to Kaspar Schleiser for the bug report. Add "baseline" and "bloatcheck" makefile targets, for revealing size changes during development.

When using a relay, the relay must support RFC for this to work. It always works for directly connected clients. Thanks to Vladislav Grishenko for prompting this feature. Remove the rule for constructed DHCP ranges that the local address must be either the first or last address in the range. This was originally to avoid SLAAC addresses, but we now explicitly autoconfig and privacy addresses instead.

Update Polish translation. Thanks to Jan Psota. Thanks to Tanguy Bouzeloc for the patch. Update Spanish translation. Thanks to Vicente Soriano. Add --ra-param option. Thanks to Vladislav Grishenko for inspiration on this. Add --add-subnet configuration, to tell upstream DNS servers where the original client is. Thanks to DNSthingy for sponsoring this feature. Add --quiet-dhcp, --quiet-dhcp6 and --quiet-ra.

Thanks to Kevin Darbyshire-Bryant for the initial patch. Thanks to Hadmut Danisch for the suggestion. Avoid treating a --dhcp-host which has an IPv6 address as eligible for use with DHCPv4 on the grounds Rockler Router Table Top Github that it has no address, and vice-versa. Thanks to Yury Konovalov for spotting the problem. Thanks to Yves Dorfsman for spotting the problem. Dnsmasq can now answer queries from the wider 'net with local data, as long as the correct NS records are set up.

Only local data is provided, to avoid creating an open DNS relay. Zone transfer is supported, to allow secondary servers to be configured. This is intended for IPv6 routers which get prefixes dynamically via prefix delegation. With suitable configuration, stateful DHCPv6 and RA can happen automatically as prefixes are delegated and then deprecated, without having to re-write the dnsmasq configuration file or restart the daemon.

Thanks to Steven Barth for extensive testing and development work on this idea. Fix crash on startup on Solaris Regression probably introduced in 2. Thanks to Geoff Johnstone for the patch.

Many thanks to Tomas Hozza for spotting the problem, and doing invaluable discovery of the obscure and undocumented API required for the solution. Thanks to Lakefield Communications for providing a bounty for this addition. Fixed crash, introduced in 2. Thanks to Robert M. Albrecht for the bug report and chasing the problem.

Add --ipset option. Thanks to Jason A. Donenfeld for the patch. Don't erroneously reject some option names in --dhcp-match options. Thanks to Benedikt Hochstrasser for the bug report.

Thanks to Christian Parpart for the patch. Thanks to Rich Felker for the bug report. Fix crash if the configured DHCP lease limit is reached.

Regression occurred in 2. Update the French translation. Thanks to Gildas le Nadan. Thanks to Niax for the bug report. Fix failure to build with DHCP support excluded. Thanks to Gustavo Zacarias for the patch. Fix nasty regression in 2. Thanks to Bernd Krumbroeck for spotting the problem. Now that only happens if there is not also a match.

Thanks to Hans-Joachim Baader for the bug report. Don't report spurious netlink errors, regression in 2. Thanks to Dan Williams for the patch. Fix build with later Lua libraries. Thanks to Cristian Rodriguez for the patch. Add --max-cache-ttl option. Thanks to Dennis Kaarsemaker for the patch. Fix breakage of --host-record parsing, resulting in infinite loop at startup.

Regression in 2. Thanks to Haim Gelfenbeyn for spotting this. Thanks to Gene Czarcinski and Vladislav Grishenko for work on this. Fix DHCPv6 to do access control correctly when it's configured with --listen-address. Thanks to Gene Czarcinski for sorting this out. Thanks to Wouter Ibens for pointing this out. Makefile tweak to do dependency checking on header files.

Thanks to Johan Peeters for the patch. Check interface for outgoing unsolicited router advertisements, rather than relying on interface address configuration.

Thanks to Gene Czarinski for the patch. Handle better attempts to transmit on interfaces which are still doing DAD, and specifically do not just transmit without setting source address and interface, since this can cause very puzzling effects when a router advertisement goes astray.

Thanks again to Gene Czarinski. Get RA timers right when there is more than one dhcp-range on a subnet. Check that tftp-root directories are accessible before start-up. Thanks to Daniel Veillard for the initial patch. Allow more than one --tfp-root flag. The per-interface stuff is pointless without that.

Add --bind-dynamic. A hybrid mode between the default and --bind-interfaces which copes with dynamically created interfaces. A couple of fixes to the build system for Android.

Thanks to Metin Kaya for the patches. These were a still-born attempt to allow automatic isolated configuration by libvirt, but have never to my knowledge been used, had very strange semantics, and have been superseded by other mechanisms. Fixed bug logging filenames when duplicate dhcp-host addresses are found. Thanks to John Hanks for the patch.

Fix regression in 2. Thanks to Atul Gupta for the bug report. Allow the target of a --cname flag to be another --cname. Thanks to Francois-Xavier Le Bail for the suggestion. Allow "w" for week as multiplier in lease times, as well as seconds, minutes, hours and days.

Update French translation. Thanks to Gildas Le Nadan. Allow a DBus service name to be given with --enable-dbus which overrides the default, uk. Thanks to Mathieu Trudel-Lapierre for the patch.

Set the "prefix on-link" bit in Router Advertisements. Thanks to Gui Iribarren for the patch. Thanks to Conrad Kostecki. Cope with router-solict packets which don't have a valid source address.

Fixed bug which caused missing periodic router advertisements with some configurations. Thanks to Andre Coetzee for spotting this. Fix non-response to router-solicitations when router-advertisement configured, but DHCPv6 not configured.

Thanks to Marien Zwart for the patch. Add --dns-rr, to allow arbitrary DNS resource records. Fixed bug which broke RA scheduling when an interface had two addresses in the same network. Thanks to Jim Bos for his help nailing this. This is more portable, more straightforward, and allows us to find the prefix length for IPv6 addresses. Add ra-names, ra-stateless and slaac keywords for DHCPv6.

Thanks to Dave Taht for help with this. Explicitly send DHCPv6 replies to the correct port, instead of relying on clients to send requests with the correct source address, since at least one client in the wild gets this wrong.

Thanks to Conrad Kostecki for help tracking this down. Send a preference value of in DHCPv6 replies when --dhcp-authoritative is in effect. This tells clients not to wait around for other DHCP servers. Better logging of DHCPv6 options. Add --host-record. Thanks to Rob Zwissler for the suggestion. The size of the file, address to which it was sent and complete pathname are supplied.

Note that version 2. Suggestion from Shantanu Gadgil. Suggestion from Malte Forkel. Arrange that addresses specified with --listen-address work even if there is no interface carrying the address.

This is chiefly useful for IPv4 loopback addresses, where any address in Thanks to Mathieu Trudel-Lapierre for the idea and initial patch. Fix crash, introduced in 2. Thanks to Stephane Glondu for the bug report. Add a new DHCP lease time keyword, "deprecated" for --dhcp-range. The effect is that clients can continue to use the address for existing connections, but new connections will use other addresses, if they exist. This makes hitless renumbering at least possible.

Thanks to SamLT for work on this. Don't cache data from non-recursive nameservers, since it may erroneously look like a valid CNAME to a non-existent name. Thanks to Ben Winslow for finding this. This makes the OpenStack use-case of one dnsmasq per virtual interface work. This is only available on Linux; it's not supported on other platforms.

Thanks to Vishvananda Ishaya and the OpenStack team for the suggestion. Updated French translation. Thanks to Rob Zwissler for spotting this. Add --tftp-lowercase option. Thanks to Oliver Rath for the patch. Thanks to Antoaneta-Ecaterina Ene for the patch. Thanks to Brad Smith for spotting this. Thanks to Olaf Flebbe for the patch. Add --dhcp-client-update option. Add Lua integration. Document the latter better, and describe how to set them from the make command line.

Thanks to Dave Taht for the patch. Improve start-up speed when reading large hosts files containing many distinct addresses. Fix problem if dnsmasq is started without the stdin, stdout and stderr file descriptors open. Thanks to Chris Moore for finding this. Thanks to Mark Mitchell for the patch.

This allows for round-robin to multiple servers, in the same way as --dhcp-boot. A good suggestion from Cristiano Cumer. Allows builds for multiple archs from the same source tree with eg.

Suggestion from Mark Mitchell. Support DHCPv6. Support is there for the sort of things the existing v4 server does, including tags, options, static addresses and relay support. Missing is prefix delegation, which is probably not required in the dnsmasq niche, and an easy way to accept prefix delegations from an upstream DHCPv6 server, which is. These will be added as the standards mature.

This code has been tested, but this is the first release, so don't bet the farm on it just yet. Many thanks to all testers who have got it this far. Support IPv6 router advertisements. This is a simple-minded implementation, aimed at providing the vestigial RA needed to go alongside IPv6.

Is picks up configuration from the DHCPv6 conf, and should just need enabling with --enable-ra. Fix long-standing wrinkle with --localise-queries that could result in wrong answers when DNS packets arrive via an interface other than the expected one.

Thanks to Lorenzo Milesi and John Hanks for spotting this one. Thanks to Brielle Bruns for the bug report. Improve dnsmasq's behaviour when network interfaces are still doing duplicate address detection DAD.

Previously, dnsmasq would wait up to 20 seconds at start-up for the DAD state to terminate. This is broken for bridge interfaces on recent Linux kernels, which don't start DAD until the bridge comes up, and so can take arbitrary time. The new behaviour lets dnsmasq poll for an arbitrary time whilst providing service on other interfaces.

Thanks to Stephen Hemminger for pointing out the problem. Fixes build failure on openBSD. Thanks to Didier Rabound for spotting the problem. Add --dhcp-sequential-ip flag, to force allocation of IP addresses in ascending order. Note that the default pseudo-random mode is in general better but some server-deployment applications need this. Fix problem where a server-id of 0. Thanks to Mike Ruiz for assistance in chasing this one down.

Thanks to Tom Fernandes for spotting the problem. Relax the need to supply a netmask in --dhcp-range for networks which use a DHCP relay. Whilst this is still desirable, in the absence of a netmask dnsmasq will use a default based on the class A, B, or C of the address. This should at least remove a cause of mysterious failure for people using RFC addresses and relays. Add support for Linux conntrack connection marking. If enabled with --conntrack, the connection mark for incoming DNS queries will be copied to the outgoing connections used to answer those queries.

This allows clever firewall and accounting stuff. Thanks to Ed Wildgoose for the initial idea, testing and sponsorship of this function. Provide a sane error message when someone attempts to match a tag in --dhcp-host. Tweak the behaviour of --domain-needed, to avoid problems with recursive nameservers downstream of dnsmasq. Thanks to Sushil Agrawal for the patch. When two tagged dhcp-options for a particular option number are both valid, use the one which is valid without a tag from the dhcp-range.

Allows overriding of the value of a DHCP option for a particular host as well as per-network values. Fix bug which resulted in truncated files and timeouts for some TFTP transfers. The bug only occurs with netascii transfers and needs an unfortunate relationship between file size, blocksize and the number of newlines in the last block before it manifests itself.

Many thanks to Alkis Georgopoulos for spotting the problem and providing a comprehensive test-case. Many thanks to Loic Pefferkorn for finding this. Thanks to Michael Stapelberg for the suggestion. Update Polish translation, thanks to Jan Psota. This has proved more or less defective over the years and the final straw is that it's effectively empty on Android. Correct wrong casts of arguments to ctype.

Thanks to Matthias Andree for spotting this. Allow build with IDN support independently from i18n. IDN support continues to be included automatically when i18n is included. Modify check on extraneous command line junk added in 2. Otherwise this breaks libvirt. Thanks to Dj Padzensky for this. Thanks to Clemens Fischer for spotting that. Many thanks to Jan 'RedBully' Seiffert for the patches. This makes things consistent with DHCP logging.

Thanks to Adam Pribyl for spotting the problem. Ensure that dnsmasq terminates cleanly when using --syslog-async even if it cannot make a connection to the syslogd. Add --add-mac option. This is to support currently experimental DNS filtering facilities.

Thanks to Benjamin Petrin for the original patch. Fix bug which meant that tags were ignored in dhcp-range configuration specifying PXE-proxy service. Thanks to Cristiano Cumer for spotting this. Raise an error if there is extra junk, not part of an option, on the command line. Flag a couple of log messages in cache. Thanks to Olaf Westrik for the patch.

Omit timestamps from logs when a logging to stderr and b --keep-in-foreground is set. The logging facility on the other end of stderr can be assumed to supply them. Thanks to John Hallam for the patch. Don't complain about strings longer than characters in --txt-record, just split the long strings into character chunks instead. Fix crash on double-free. This bug can only happen when dhcp-script is in use and then only in rare circumstances triggered by high DHCP transaction rate and a slow script.

Thanks to Ferenc Wagner for finding the problem. Only log that a file has been sent by TFTP after the transfer has completed successfully. Thanks to Fred Damen for spotting this. Many thanks for that.

Never cache DNS replies which have the 'cd' bit set, or which result from queries forwarded with the 'cd' bit set. Without this change it's possible to pollute the dnsmasq cache with bad data by making a query with the 'cd' bit set and subsequent queries would return this data without its being marked as suspect.

Thanks to Anders Kaseorg for pointing out this problem. Add --proxy-dnssec flag, for compliance with RFC Dnsmasq will now clear the 'ad' bit in answers returned from upstream validating nameservers unless this option is set. Allow a filename of "-" for --conf-file to read stdin. Suggestion from Timothy Redaelli. Rotate the order of SRV records in replies, to provide round-robin load balancing when all the priorities are equal. Thanks to Peter McKinney for the suggestion.

Thanks again to Peter McKinney. Make it possible to override this behaviour by defining the semantics if the same domain appears in both --server and --address. Similarly when setting an IPv6 address only this will allow forwarding of IPv4 queries. Thanks to William for pointing out the need for this.

Allow more than one --dhcp-optsfile and --dhcp-hostsfile and make them understand directories as arguments in the same way as --addn-hosts. Suggestion from John Hanks. Ignore rebinding requests for leases we don't know about.

Rebind is broadcast, so we might get to overhear a request meant for another DHCP server. NAKing this is wrong. Thanks to Brad D'Hondt for assistance with this. Fix cosmetic bug which produced strange output when dumping cache statistics with some configurations.

Thanks to Fedor Kozhevnikov for spotting this. Thanks to Gianluigi Tiesi for finding this. Thanks to Arno Wald for finding this one. Allow the empty domain ". Thanks to Axel Beckert and Petr Salinger. Fix code to avoid scary strict-aliasing warnings generated by gcc 4.

Fixed bug which caused bad things to happen if a resolv. Thanks to Nikolai Saoukh for the patch. Rationalised the DHCP tag system. The NOT operator changes to '! Dhcp-host directives can set more than one tag now. The old ' ' NOT, "net:" prefix and no-prefixes are still honoured, so no existing config file needs to be changed, but the documentation and new-style config files should be much less confusing.

Added --tag-if to allow boolean operations on tags. This allows complicated logic to be clearer and more general. A great suggestion from Richard Voigt. Allow --dhcp-broadcast to be unconditional. Thanks to Max Turkewitz for assistance finding this. If we send vendor-class encapsulated options based on the vendor-class supplied by the client, and no explicit vendor-class option is given, echo back the vendor-class from the client.

Fix bug which stopped dnsmasq from matching both a circuitid and a remoteid. Thanks to Ignacio Bravo for finding this. Add --dhcp-proxy, which makes it possible to configure dnsmasq to use a DHCP relay agent as a full proxy, with all DHCP messages passing through the proxy. This is useful if the relay adds extra information to the packets it forwards, but cannot be configured with the RFC server-override option.

The idea is that such a line can be added automatically by libvirt or equivalent systems, without disturbing any manual configuration. This fixes a bug which caused nonsense IP addresses to be logged.

Thanks to Sergei Zhirikov for finding and analysing the problem. Fix a problem where, if a client got a lease, then went to another subnet and got another lease, then moved back, it couldn't resume the old lease, but would instead get a new address.

Thanks to Leonardo Rodrigues for spotting this and testing the fix. Fix weird bug which sometimes omitted certain characters from the start of quoted strings in dhcp-options. Thanks to Dayton Turner for spotting the problem.

Thanks to AJ Weber for prompting this addition. This improves performance when large numbers of hosts with similar MAC addresses all try and get an IP address at the same time.

Thanks to Paul Smith for his work on this. Thanks to Pawel Golaszewski for prompting this and Eric Cooper for further testing. Add --dhcp-generate-names. Suggestion by Ferenc Wagner. Tweak DNS server selection algorithm when there is more than one server available for a domain, eg. Add --max-ttl. Thanks to Fredrik Ringertz for the patch.

Suggestion from Clemens Fischer. The dot to the left of the domain has been implied and not required for a long time, but it should be accepted for backward compatibility. Thanks to Andrew Burcin for spotting this. Add --rebind-domain-ok and --rebind-localhost-ok. Log replies to queries of type TXT, when --log-queries is set. Thanks to Shantanu Gadgil for the patch. Updated Polish translation.

Updated German translation. Thanks to Matthias Andree. Thanks to Fedor Kozhevnikov for spotting the problem. Updated Spanish translation. Thanks to Chris Chatham. Note that this is fixed in kernel 2. Also fix dnsmasq bug which reported the wrong address when this failed.

Thanks to Fedor for finding this. This handles the case that loopback interfaces do not exist when dnsmasq is first started. Tweak the PXE code to support port This should reduce broadcasts and make things more reliable when other servers are around. It also improves inter-operability with certain clients.

Make a pxe-service configuration with no filename or boot service type legal: this does a local boot. Now we only do A for A processing for four decimal numbers delimited by dots. A couple of tweaks to fix compilation on Solaris. Thanks to Joel Macklow for help with this. Another Solaris compilation tweak, needed for Solaris Thanks to Lee Essen for that.

Increased the default limit on number of leases to from This is mainly a defence against DoS attacks, and for the average "one for two class C networks" installation, IP address exhaustion does that just as well. Making the limit greater than the number of IP addresses available in such an installation removes a surprise which otherwise can catch people out. Thanks to Gildas Le Nadan for spotting this. A good suggestion from Gildas Le Nadan.

This can be reconfigured using --edns-packet-max if needed. Thanks to Francis Dupont for pointing this out. It has been supported since version Thanks to Arek Dreyer for spotting this. Thanks to Arek Dreyer for providing this. Thanks to Oschtan for the bug report. This could cause spurious "Ignoring domain Thanks to Fedor Kozhevnikov for finding and analysing the problem. This function is only available if dnsmasq is compiled with internationalisation support, and adds a dependency on GNU libidn.

Without i18n support, dnsmasq continues to be compilable with just standard tools. Thanks to Yves Dorfsman for the suggestion. Suggestions from Michael Rack. Fix regression which broke echo of relay-agent options.

Thanks to Michael Rack for spotting this. Don't treat option 67 as being interchangeable with dhcp-boot parameters if it's specified as dhcp-option-force. Make the code to call scripts on lease-change compile-time optional.

Thanks to Ralf for the patch. Thanks to Felix Schwarz for pointing this out. Teach --conf-dir to take an option list of file suffices which will be ignored when scanning the directory. Useful for backup files etc. Thanks to Helmut Hullen for the suggestion. Add new DHCP option named tftpserver-address, which corresponds to the third argument of dhcp-boot. This allows the complete functionality of dhcp-boot to be replicated with dhcp-option.

Useful when using dhcp-optsfile. Test which upstream nameserver to use every 10 seconds or 50 queries and not just when a query times out and is retried. This should improve performance when there is a slow nameserver in the list. Thanks to Joe for the suggestion. Don't do any PXE processing, even for clients with the correct vendorclass, unless at least one pxe-prompt or pxe-service option is given.

Thanks to Spencer Clark for spotting this. Many netboot ROMs can't cope with fragmented packets. Thanks to Niels Basjes for the bug report. Thanks to Steve Grubb at Red Hat for spotting this. This problem has Bugtraq id: and CVE: version 2. Thanks to Jose Luis Duran for spotting this. Log TFTP "file not found" errors. These were not logged, since a normal PXELinux boot generates many of them, but the lack of the messages seems to be more confusing than routinely seeing them when there is no real error.

The current changelog now runs from version 2. Fixed bug which broke binding of servers to physical interfaces when interface names were longer than four characters.

Fixed netlink code to check that messages come from the correct source, and not another userspace process. Thanks to Steve Grubb for the patch. Maintainability drive: removed bug and missing feature workarounds for some old platforms. Solaris 9, OpenBSD older than 4. Don't read included configuration files more than once: allows complex configuration structures without problems. Mark log messages from the various subsystems in dnsmasq: messages from the DHCP subsystem now have the ident string "dnsmasq-dhcp" and messages from TFTP have ident "dnsmasq-tftp".

Allow --addn-hosts to take a directory: all the files in the directory are read. Thanks to Phil Cornelius for the suggestion. Support --bridge-interface on all platforms, not just BSD. Added support for advanced PXE functions. It's now possible to define a prompt and menu options which will be displayed when a client PXE boots. It's also possible to hand-off booting to other boot servers.

See the --pxe-prompt and --pxe-service keywords. Improvements to DHCP logging. Thanks to Tom Metro for useful suggestions. Add ability to build dnsmasq without DHCP support. Thanks to Mahavir Jain for the patch. Added --test command-line switch - syntax check configuration files only.

Fixed interface enumeration code to work on NetBSD 5. Updated config. Handle duplicate address detection on IPv6 more intelligently. In IPv6, an interface can have an address which is not usable, because it is still undergoing DAD such addresses are marked "tentative".

Previously, on getting such an error, dnsmasq would silently abandon the address, and never listen on it. Now, it retries once per second for 20 seconds before generating a fatal error. Thanks to Martin Krafft for the bug report. Add DBus introspection. Patch from Jeremy Laine. Update Dbus configuration file. Patch from Colin Walters. This is useful for eg iPXE, which expect all its private options to be encapsulated inside a single option Enhance --dhcp-match to allow testing of the contents of a client-sent option, as well as its presence.

This application in mind for this is RFC client-architecture specifiers, but it's generally useful. Joey Korkames suggested the enhancement.

Thanks to Bastian Machek for the heads-up. Thanks to Jon Nelson for the patch. Thanks to Peter Naulls for the bug report. In this case it's not possible to supply a complete configuration, but individually-configured options eg PAC may be useful. Thanks to Ib Uhrskov for the suggestion.

Addresses which end in. See Microsoft KB We therefore no longer allocate these addresses to avoid hard-to-diagnose problems. Delete the PID-file when dnsmasq shuts down. Note that by this time, dnsmasq is normally not running as root, so this will fail if the PID-file is stored in a root-owned directory; such failure is silently ignored.

To take advantage of this feature, the PID-file must be stored in a directory owned and write-able by the user running dnsmasq. Thanks to Olaf Westrik for the suggestion. Remove ISC-leasefile reading code. This has been deprecated for a long time, and last time I removed it, it ended up going back by request of one user. This time, it's gone for good; otherwise it would need to be re-worked to support multiple domains see below.

This is a long-standing request. Clients are assigned to a domain based in their IP address. When this is set, there must be a domain associated with each client, and only fully-qualified domain names are added to the DNS.

The advantage is that the only the FQDN needs to be unique, so that two or more DHCP clients can share a hostname, as long as they are in different domains. This may be useful information to have now that it's variable.

Tighten up data-checking code for DNS packet handling. Thanks to Steve Dodd who found certain illegal packets which could crash dnsmasq. No memory overwrite was possible, so this is not a security issue beyond the DoS potential. Update example config dhcp option 47, the previous suggestion generated an illegal, zero-length, option. Thanks to Matthias Andree for finding this.

Rewrite hosts-file reading code to remove the limit of characters per line. John C Meuser found this. Create a net-id tag with the name of the interface on which the DHCP request was received.

Fixed minor memory leak in DBus code, thanks to Jeremy Laine for the patch. Thanks to Jeremy Laine for the patch. Allow for more that one MAC address in a dhcp-host line. This is useful to give a fixed address to a host which has two network interfaces say, a laptop with wired and wireless interfaces. It's very important to ensure that only one interface at a time is up, since dnsmasq abandons the first lease and re-uses the address before the leased time has elapsed.

John Gray suggested this. Thanks to Chris Marget for spotting this improvement. Add --cname option. This provides a limited alias function, usable for DHCP names. Thanks to AJ Weber for suggestions on this. Thanks to Steven Barth and Grant Coady for bugreport.

Also reject out-of-range port spec, which could break things too: suggestion from Gilles Espinasse. Thanks to Carlos Carvalho for help chasing this down. Again introduced in 2. This bug has never been reported in the wild. Fix crash in netlink code introduced in 2.

Thanks to Jean Wolter for finding this. Patch to enable compilation of latest Mac OS X. Thanks to David Gilman. Thanks to Christopher Chatham. Flag errors when configuration options are repeated illegally. The user is assumed to known what they are doing in this case. Hosts without the time spec still get infinite leases for BOOTP, over-riding the default in the dhcp-range.

Thanks to Peter Katzmann for uncovering this. Fix problem matching relay-agent ids. Thanks to Michael Rack for the bug report. Add --naptr-record option. Suggestion from Johan Bergquist. Apply patches from Stefan Kruger for compilation on Solaris 10 under Sun studio. Yet more tweaking of Linux capability code, to suppress pointless wingeing from kernel 2. Improve error checking during startup. Previously, some errors which occurred during startup would be worked around, with dnsmasq still starting up.

Some were logged, some silent. Now, they all cause a fatal error and dnsmasq terminates with a non-zero exit code. The errors are those associated with changing uid and gid, setting process capabilities and writing the pidfile.

Thanks to Uwe Gansert and the Suse security team for pointing out this improvement, and Bill Reimers for good implementation suggestions. Thanks to Stephane Billiart for the patch. Implement random source ports for interactions with upstream nameservers. New spoofing attacks have been found against nameservers which do not do this, though it is not clear if dnsmasq is vulnerable, since to doesn't implement recursion.

By default dnsmasq will now use a different source port and socket for each query it sends upstream. Explicit source-port specifications in --server configs are still honoured. Replace the random number generator, for better security. Don't attempt to change user or group or set capabilities if dnsmasq is run as a non-root user. Without this, the change from soft to hard errors when these fail causes problems for non-root daemons listening on high ports.

Thanks to Patrick McLean for spotting this. Copy lines Copy permalink View git blame Reference in new issue. You signed in with another tab or window. Reload to refresh your session.

You signed out in another tab or window. Use the values of --min-port and --max-port in outgoing. This keeps as much entropy. This replaces. Previously, such queries would all be forwarded. This is, in theory, inefficent but in practise. An attacker can send a query multiple times, and for each repeat,. The chance of a. The new behaviour detects repeated queries and.

Improve behaviour in the face of network interfaces which come. Alter calculation of preferred and valid times in router. Proof if ever it were needed that one can never have too many clamps. After the glue had set overnight, I ran the resulting legs across the jointer and was astounded by the quality of the finish already remember this jointer is new to me.

With the legs glue up and now square it was time to cut them to length and glue up the two H sections that form either end of the frame structure. But first, it was domino time. The Festool Domino machine is an absolute joy to use.

I had a few test cuts on some scraps before using it on the real thing. Within 30 minutes I had the hang of it using some shims under the machine where required on the table leg faces and had the domino mortices cut in short order. It's really fun turning 2 sheets of 4x8 Plywood into a real thing. To break down the sheets I summoned the Makita Track Saw which made light work of the task.

I won't give too much away so that you still have a need to purchase Ron Paulk's plans. But in his YouTube video that accompanies the plans he shows making a router template to route the holes in the sides of the torsion box. I had a horrible time with a template cutter and opted to use the tracksaw for this job coupled with a 1" forstner bit in the corners.

Time for a dry fit to get an idea of the final sizes and see how it feels in person, always a fun moment. This project marked my first foray into HVLP spraying. The Fuji Mini Mite 4 was the unit I ended up purchasing as it should be able to handle everything from finish sprays like Lacquer and Polyurethane to super thick Latex paint with a little thinning. The options available in this space are rather bewildering at first so take your time and do your research.

The first spray might have over sprayed primer onto the concrete beneath, might. I was lucky and caught it soon enough that a quick pressure wash sorted the problem but the tarp was the real solution. Unless you have a really well ventilated space expect the paint over spray to go everywhere as a fine dust. Wearing a respirator feels like a non-optional choice to me. Once the bench was primed with 3 coats of multi-purpose primer from Sherwin-Williams, it was time to put the final colour on the bench.

I picked a shade of blue from the Red Bull F1 team media kit, the closest colour that Sherwin could do for me was 'Crackle Blue' and I think it looks absolutely gorgeous. This was my first attempt at spraying anything and after some early drips which I later sanded out in the corners I managed to end up with a finish quality that absolutely blew me away.

The prevailing wisdom says that once you spray a finish, you'll never want to brush one on ever again - I concur.

Just look at it! I used Latex paint from Sherwin Williams for this. Despite the entire internet saying how difficult Latex paint was to spray, within a few minutes I had the consistency correct via thinning using a bit of distilled water and some Floetrol. The paint took about 4 to 5 coats to reach this stage. I found that less was more and that more coats equals less retouching and ultimately is less work than a couple of thick coats that either orange peel the surface looks like orange peel - this is bad or start dripping.

Once the legs were painted I added a couple of coats of Polyurethane just to attempt to harden the softer Latex paint against knocks and bangs - time will tell how wise that was but it looks so good! I spilt the finish of the torsion box into two halves. The first was to use water based satin Polyurethane on the bottom, sides and insides and second was to use BLO on the top itself.

My rationale is that it is a workbench and Polyurethane creates a durable, but slick finish. I've experienced with Poly based finishes before a high friction coefficient to get heavy items moving but once they're moving, they just keep sliding.

It is my hope that with BLO, this is will not be an issue - time will tell. I flooded the top with BLO and let it soak for 10 minutes before thoroughly wiping the excess off with a rag. It's important to note that BLO rags should be allowed to dry thoroughly spread out, they can be a source of fire if crumpled and put in a bin with other combustibles so take care.

You can see the beautiful sheen the BLO gives the top versus the naked Plywood below.

Wood Furniture Woodworking Projects Price Amazon Prime Woodturning Tools 12 Open Hardware Now Update