%!$ Easy Diy Woodworking Bench Plans For You #!@

mini-kreg-jig-pocket-hole-kit-home-depot-air Bench Clamp with Bench Clamp Base. Adaptive Cutting System Splinter Guards. It's the one to get if you are planning on building a deck. Verified Reviewer. Buying Format. Kreg will even sell you a case to keep them all in! Maximum thickness hoe approximately one and one-half inches, which is the actual size of all 2x posts and boards such as 2 x 4s and 2 x 6s.

Width: Most jigs work with a minimum width of about one inch. There is no practical maximum on width. Standard guides work for anything up to four inches wide. After that, you just keep adding holes six inches apart until you're done.

Thickness: Most jigs work with a minimum thickness of one-half inch. Maximum thickness is approximately one and one-half inches, which is the actual size of all 2x posts and boards such as 2 x 4s and 2 x 6s. Pocket-hole jigs have three basic components:. Drill bit with adjustable collar to set correct depth; Too shallow and the joint won't be strong.

Too deep and the point of the screw might go through the joint, marring the outer surface. The Kreg Tool Company doesn't just make pocket-hole jigs. There is also a handy decking jig so you can fix your boards without ugly nail heads showing , a specialist drawer-side jig of particular interest to cabinetmakers , and several other additions.

However, they are all variations of the pocket-hole idea, so that's what we're focusing on here. The accuracy of the drill guide is vital.

Some manufacturers use aluminum. It's light, so it's easy to move around, but it's prone to wear, particularly from a high-speed steel drill bit. Kreg Jigs are made from a nylon material reinforced with fiberglass. The tough composite then has hardened steel drill guides inserted, which come with a lifetime warranty. This ensures precision and repeatability.

Clamping the workpiece firmly in the jig is another important aspect. Wood is soft, so the clamp can't be too aggressive or it will mark the surface.

Some makers use a threaded version. Kreg favors a toggle clamp which has more positive closure or, on the top-end K5, an adjustable ratchet. If the material is too large to move to the jig, Kreg drill guides are all demountable, and each has its own specific clamping point. This gives unrestricted mobility, and it means you can often carry out furniture repairs in situ. If you buy a full Kreg Jig system, you'll find a clamp included the K5 model is even self-adjusting.

Many DIY woodworkers, as well as professionals, already own C-clamps that will do the job. Setting up the jig has to be clear and simple. Measurements on Kreg Jigs are molded into the body so there's no mistake. Hole depth and screw size charts are also provided.

Nothing is left to chance. You have a choice of jig systems. You can buy a comprehensive system like the K5, or start smaller and add components as you need them. Kreg will even sell you a case to keep them all in! Waste always presents challenges to woodworkers. The bench-mounting Kreg jigs have expanded recesses for better chip clearance. Some have dust extraction ports.

We looked at a number of cheaper pocket-hole jigs that compete with Kreg. The main problems with them are excessive play in the components which makes accuracy very hit-and-miss and less robust construction. In general, they aren't as versatile, and most are two-hole rather than three-hole systems.

Kit contents can appear impressive, but the numbers are often padded with small items like screws or dowels. A Kreg Jig is an investment, though it doesn't have to be a large one. That's not a great deal extra for the long-term accuracy and durability that has made Kreg the market leader. What is your Building Skill Level? How many Projects do you complete in a Year?

How would you rate the Quality of your product? How would you rate the Ease of Use of your product? Would you Recommend this Product? You are connected as. Connect with:. Thank you for posting a review!

We value your input. Share your review so everyone else can enjoy it too. Your review was sent successfully and is now waiting for our staff to publish it. Thank you for posting a question! Please click on the link in the confirmation email we just sent you to submit your question. Your question will appear on the site once someone answers it.

Filter Reviews. Search Reviews. Instructions Frame Size Problems Material Quality. More Filters. Scores filter All Score all. Images filter All All reviews. Show Reviews. Clear All. Updating Results. This is very helpful. Seems Kreg don't provide much useful information on this little jig. Everything online is about the R3 on up. Sounds like we need the three equations - one for jig position from the edge, one for the position of the stop and one for the screw length.

With that you could use the jig for any of the thicknesses above though I have my doubts if you can use it for 2" material. Do you have a fitting chart for using a Kreg Jig HD for thicker wood sizes? Please help! Kreg-Mini Cheat Sheet Like this article? Thank you!

This article represents my own opinion and may contain affiliate links. Please read my disclosures for more information. First you want to adjust the collar on the 2-set drill bit to control the depth of the pocket hole. Next you want to make sure you clamp down the Kreg-Mini the appropriate distance from the edge of the material based on the thickness of the wood you are joining. Did you like these plans?

If you'd like to say thanks for the Mini Kreg Jig Pocket Hole Kit Home Depot Youtube info click here. Labels : Jigs , Tips , Tools 26 comments. Unknown July 8, at AM. Unknown July 18, at PM. Unknown October 20, at PM.

Unknown November 14, at PM. Anonymous December 13, at PM. X March 1, at PM.

Mallet Toe Vs Hammer Toe 00 Small Wood Carving Machine 2020 Etape Digital Tape Measure Uk Zoom Bora Wood Rack Screws You