%!$ Easy Diy Woodworking Bench Plans For You #!@

belt-and-disc-sander-clarke-youtube Our History | American Sanders

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.

This product is belt and disc sander clarke youtube against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which belt and disc sander clarke youtube be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. The following should be supplied inside the box.

If any parts are missing, please contact your local Clarke dealer. Read and become familiar with the Clarke Belt And Disc Sander Spares Youtube entire operating manual.

Damage should be properly repaired or the part replaced. If in doubt. Ensure that lighting is placed so that you will not be working in your own saander. All visitors should be kept a safe distance from the bflt area, especially when the machine is being used. Follow maintenance instructions. For best footing, wear rubber soled footwear. Keep floor clear of oil, scrap wood, etc. Loose clothing or jewellery may get caught in moving parts.

Wear protective hair covering to contain long hair. Turn power off. Do not leave the machine until it comes to a complete stop. Do not use in an explosive atmosphere around paint, flammable liquids etc.

Sanddr dangerous environments. Belt and disc sander clarke youtube the tool begins to make an abnormal noise, or produce excessive vibrations, smoke or burning odour, turn the tool off immediately and do not operate, until repaired. Be aware that harmful or idsc dusts could be produced when sanding some woods. Nails etc. Read these electrical safety instructions thoroughly before connecting the product to the mains supply.

Before switching the product on, make sure that the voltage of your electricity supply Clarke Belt And Disc Sander Spares Question is the same as that indicated on the rating plate. This product is designed to operate on. This product may be fitted with a non-rewireable plug. If it is necessary to change the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or damaged, the plug must not be used until a suitable replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due to damage, it should be cut off and a replacement fitted, following the wiring instructions shown below. Belt and disc sander clarke youtube old plug must be disposed of safely, as insertion into a mains socket could cause an electrical hazard. The wires in the power cable of this product are coloured in accordance with the following code:.

If the colours of the wires sanddr the power cable of this product do not correspond with the markings on the terminals of your plug, proceed as follows. Sanding operations are inherently dusty. The use of a mask or respirator is still recommended even when a dust-collection system is in use. Mark the workbench through the mounting holes located in the sander base.

Drill holes in the workbench clwrke the marks. Use long bolts, spring washers and nuts not suppliedto secure the sander to the workbench as shown. Position table-support bracket so that the "pivot pin" fits into the corresponding hole on the sander frame and the radius slot aligns with the threaded hole in the frame.

Place washer on threaded shaft of knob, insert through radius slot, and tighten into bet hole. Position the backstop against the belt frame so that the slot aligns with threaded hole in frame. Remove sanding disc from disc plate. Sanding discs are attached to the plate using Ryobi 200 W Belt And Disc Sander Youtube a pressuresensitive adhesive. Align perimeter of disc with plate and ahd disc firmly into position on plate, leaving no loose edges. Remove the tray located on the bottom of the belt sanding arm by loosening the two screws belt and disc sander clarke youtube the back of the belt sanding arm.

Clrke new sanding belt over the drive and idler drums. Ensure the belt is centred on both drums and is the right way round. The belt-tracking adjustment is set at the factory so that the abrasive belt will run true on the drums. If, however, the belt should track to one side or the other, an adjustment can be made by turning the tracking knob. Note whether the belt tends to wander off its track, and to which side left or right of the sander.

The sanding belt can be used in the vertical or horizontal position, depending on operator needs and the workpiece. When sanding flat broad surfaces on the belt hold the workpiece firmly on the surface of the belt and against the backstop, keeping fingers away from the sanding belt. Consider using a push or hold-down stick. When using the sander without the backstop, ensure that you you have a firm hold on the workpiece at all times and take extra care.

Hold the workpiece firmly, keeping fingers away from the sanding belt. Keep the curve pressed firmly against the idler drum, moving the work evenly back and forth across belt and disc sander clarke youtube drum.

Always sand outside curves using the sanding disc and moving the workpiece from the left side of centre, as shown. Keep the curve pressed firmly against the sanding disc, moving the work evenly from the left side of the sanding disc. Be sure to hold the workpiece firmly against the surface of the table.

A mitre gauge can be used on the work table, as aand. The mitre gauge head can be set anywhere up to 60 o. Always move the workpiece across the left side dust chute end of machine of the sanding disc and be sure to hold the workpiece down tightly onto the table surface. During normal use, sanding belts and disc can become loaded belt and disc sander clarke youtube sanding debris. Use a stick belt cleaner available at most hardware stores to remove build-up.

For complaints, use another form. Study lib. Upload document Create flashcards. Flashcards Collections. Documents Last activity.

Add to Add to collection s Add to saved. This guarantee does not effect your statutory rights. AlWAYS check for damage before using the machine, check for alignment of moving parts, breakage of parts, and any other condition that may affect the machines operation.

Consult your local dealer. Everyday eyeglasses do not have impact resistant lenses, and are not safety glasses. Cluttered areas belt and disc sander clarke youtube benches invite accidents. Avoid accidental starting.

Be aware that accidents are caused by carelessness due to familiarity. Avoid contact with earthed surfaces - pipes, radiators etc.

NEVER operate belt and disc sander clarke youtube while belt and disc sander clarke youtube the influence of uoutube, alcohol or any medication.

NEVER leave machine running unattended. NEVER force the machine, it will do a better and safer job at the rate for which it was designed. NEVER use power tools in damp or wet locations or expose them to rain. ALWAYS yojtube the mains cable well away from the machine and ensure an adequate electrical dsic is close at hand so that the operation is not restricted by the length youtuve the cable. NEVER allow the ventilation slots in the motor to become blocked.

NEVER sand pieces which cannot be held firmly by hand. This product is designed to operate on VAC 50Hz. Connecting it to any other power source may cause damage.

Always fit a 13 Amp fuse. Earth Green and Yellow Neutral Blue Live Brown Ensure that the outer sheath of the cable is firmly held by the clamp We strongly recommend that this machine is connected to the mains supply via a Residual Current Device RCD If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

Position the sander on the workbench where you intend to use it. Adjust table to angle desired for sanding task. Secure the backstop to frame with 2 x socket head screws, washers as shown. Do not overtighten. Secure hose in place with a hose clamp. Remove mitre gauge and work table assembly.

Soon schools were ordering the Clarke Sander to restore wood desks, so, in he moved to Chicago to oversee the manufacturing and sales of his increasingly popular invention. Through the mid’s demand increased, and Clarke added a handle to his sander for use in wood floor restoration. Nov 21,  · On a belt sander, a single loop of seamless sandpaper is held taught between two motorized cylinders that drive the loop quickly in one www.- “belt” portion, on both stationary and handheld belt sanders functions as the sanding surface. With their powerful electric motors, belt sanders are designed to tackle larger, more extensive sanding projects than orbital or hand-powered sanders. 6" x 48" belt tilts & locks at any angle from 0 to 90° Spring adjuster to regulate belt tension 9" (mm) sanding disc Supplied with mm x mm sanding table that is adjustable between 0 & 45°. Can be used with either sanding belt or disc. Complete with finger guard on belt, full disc guarding & .

Reddit Woodworking Sites Pdf Mallet Rubber Head Hammer Queen Best Raspbian Apps Zip