%!$ Easy Diy Woodworking Bench Plans For You #!@

make-a-frame-play-tent-you DIY A-Frame Play Tent Step 1: Build the Tent Frame. From the top of each moulding, measure and mark 6″ down. With your drill and 3/4″ spade Step 2: Paint the Frame. After you have drilled all of your holes, it’s time to paint! Using the Waverly Inspirations Step 3: Assemble the Tent. Cut your. Aug 16,  · To assemble your Kids Play Tent: 1. Cut your main fabric (in my case, the floral) into two 34″ x 51″ panels (this gives about a 2″ seam allowance). Cut the accent fabric (in my case, the stripe) into a 22″ x 51″ panel (this also gives about a 2″ seam allowance). Dec 12,  · Drill a hole through the center of each strip, 6 in (15 cm) from the top. Alternatively, you can drill a screw into each strip until it goes all the way through the wood. Once your screw clears Sand each of the holes if your wood splinters using a small piece of to grit sandpaper if there 67%(3).
Aug 16,  · To assemble your Kids Play Tent: 1. Cut your main fabric (in my case, the floral) into two 34″ x 51″ panels (this gives about a 2″ seam allowance). Cut the accent fabric (in my case, the stripe) into a 22″ x 51″ panel (this also gives about a 2″ seam allowance). Dec 12,  · Drill a hole through the center of each strip, 6 in (15 cm) from the top. Alternatively, you can drill a screw into each strip until it goes all the way through the wood. Once your screw clears Sand each of the holes if your wood splinters using a small piece of to grit sandpaper if there 67%(3). Aug 27,  · TIPS: For a little extra detail and to keep the tent cover taut, I fed twine through some holes of the cover and tied it to the legs of the www.- helps prevent the tent cover from sagging. Also, if you are using this on wood floors the legs may have a hard time staying up. I find that if you put your tent on top of a blanket it will help it from just falling flat.

Miter Fold Dado Set Windows Plan Chaise Adirondack Bois 11