%!$ Easy Diy Woodworking Bench Plans For You #!@

laguna-1412-canada-engineering Water must have snuck in at some point and found the one spot that didn't have paint. RobBob Posts: laguna 1412 canada engineering Now to issues with the upper guide blocks. This saw with the CI wheels takes a long time to spin down to a stop, 30 seconds or more. Great suggestion, Betty.

I picked up a Laguna 14BX last fall and super glad I did. I did tons of research on the choices in that range and kept coming up with Laguna on top. I spent a little extra to get the V version which also includes the brake. Having a brake makes me breathe a little easier since I have kids who come pester me in the shop.

I can stop it in a second before I turn around to see what they're up to. I just moved into a new house this Spring and had a chance to set up the bandsaw again. It was much easier the second time through and I was resawing fir chunks lickety split.

I picked up a couple of blades from Timberwolf and they seem like great quality for an excellent price. The fit and finish is very nice for the saw as well. The only super minor nitpik was the underside of my table had a bit of rust. Water must have snuck in at some point and found the one spot that didn't have paint.

I also like the fact that the tower is one piece - I think the regular is two pieces? The fence is also super handy and easy to true up if your blade is off a bit. I would definitely recommend the Laguna and especially the 14bx. Take this all with a grain of salt though, it's my first bandsaw. Gj12 Posts: I have the Rikon I bought it on amazon when they had a crazy deal. The only thing I wish it had was a brake.

My other choice at that time after a lot of research was the BX, volt version. It was unbelievable how true the cut was! Deke Posts: I'm late here, but I have had the Rikon for quite a few years. I upgraded it with Carter guides and a Kreg fence and I really like it and use it for all types of cuts.

Previous to that I had an old Walker Turner and learned to "tune up" a bandsaw pretty well. Sadly it cracked. A friend bought the Laguna 14 when it came out and I Laguna 1412 Canada Repair helped him set it up. I was really jealous. Like almost everyone, I agonized over which saw to get. Even though I am happy with my Rikon, if the Laguna 14 had been available when I bought my Rikon, the choice would have been super easy - Laguna all the way.

I know Rikon has made some improvements, but the Laguna has a higher level of overall quality and engineering. The one concern is the table is a bit lower on the Laguna. I'm not sure if that would bother me or not, but my friend seems to have no complaints about that. Our Woodcraft stores now carry the lower cost Laguna saws, so that is also a plus. JCLP Posts: Very happy with my purchase. Don T Posts: Phoenix, Az.

Take a look at the Rikon it has a brake. Quote from: Bob D. I've owned the Rikon for several years. It's a great saw. I retrofitted mine with the spring loaded guides and they work well; make it much easier to setup after changing blades. The lower guides are still a little hard to get to though. I have never used the fence included with the saw.

Instead I purchased the Carter Magfence II and find that this makes it much easier to adjust the fence for the right resew cuts since you can place the fence anywhere you want and just turn on the 2 magnets. Clamps Suction Vises. Nailers Staplers. Vises Lifting Systems. NEW Festool Planex.

Shop Now. Doorbuster Deals from Jet. Stabila Sale. Browse Categories. New Products. Add to Cart. Add to Wish List Add to Compare. SKU: FT SKU: FE Out of stock. Free Shipping We offer free shipping on a variety of products, delivers typically in business days. What beautiful beast! At first, things were going a little slow interpreting the instruction manual illustrations.

The thing that strikes me about this machine is its precision engineering and tight tolerances. Just a quality piece of equipment with no flimsy components.

So, for a temporary test-run to check blade drift, I used a wrap of duct tape. I have read some very negative comments on critical issues with the Rikon, especially with adjustment for the lower bearing guides.

Based on this review and the comments, I will soon be purchasing the Laguna saw. Great review and very detailed. Any thoughts on Laguna BX? Is it worth the upcharge for a break system. I am a hobby woodworker and had a 9 inch Black and Decker table top bandsaw. It went out with the trash after 10 years of frustration Not sure if I should go with the or BX.

Any long term updates you could share? I am going to buy a bandsaw soon and this is my likely choice. I too worry about the dust collection.

Hi Joe. The saw has continued to perform like a champ. I found that in practice the single dust collection port was not a problem. The inside of the cabinet remained pretty clean during heavy use and overall I feel that it collects well for a bandsaw. Just purchased one of these guys, this review helped a lot. Can you tell me the height of the stand? The specs only have the height of the table and the height of the total machine.

This is going to be a Birthday present by my Family to me I guess 70 is a magic number I have been looking for a while And it can be a little overwhelming. After prolonged discussions and email with Laguna customer service they agreed to replace both. Yes, the locking knob is completly loose.

Mechanism seems to fall apart when the wheel is loosened, and only is correctly by tightening it very tightly. The lower ones are pretty much inaccessible. Tightening the lower ones take a pair of long reach water pump pliers for me to get at them.

Maybe I got a lemon. I agree! At first I was Laguna 1412 Canada 7th Edition happy with it but after I have had it for a while my opinion has changed. Some of these might seem picky but at this price point my expectations are higher and these should not be an issue. Which is slightly scary when you are working with wood. Furthermore, one of the lower blocks keeps sliding out and falling off. I often find it laying inside the cabinet and have to re-install it. I am waiting for the day it gets sucked up by the dust collector.

The greatest depth of re-saw that I have done is 8 inches. And truthfully HSS blades need to be longer to handle greater depths because the blade gets really hot.

I had to spend more money to get the mobile base and its terrible. Bolts will randomly fall off, because the feet on the base scrape the floor when the lift wheel is engaged in the up position. So I have to lift up on the saw to prevent the scraping but then the feet fall out.

There is a magnetic strip that holds a protective door over the blade. That strip was the first to fall off. The configuration of the saw makes it really difficult to change the blade. The vertical saw support has a slit in it to accept the blade, but its really hard getting the blade into and out of this slit. Every time I put a blade in the teeth rub on it and I feel like I am dulling half the teeth on the blade. Here in the past month the saw has started to shake.

I am unsure why. I am concerned the upper wheel is out of balance some how. Sorry, but it sounds like poor assembly and maintenance from whomever assembled and is operating it. Believe it or not, it is possible to get a lemon…. Just purchased the 14 12, in part because of your review. Can you describe how you set-up the guides? The manual says some of the guides should touch the blade, a series of YouTube videos I believe produced by Laguna says all the guides should touch the blade, and when I spoke to customer service, I was told that none of the guides should touch the blade.

Hi Jeff. I have always set the guides so that they are in contact on all 10 points. The ceramic should just kiss the blade and it will do a great job supporting it. Thanks for your reply Paul — much appreciated. Just a bit confused, what are the 10 points?

Old Masters Gel Stain Application Salad Bowl Finish Home Depot Australia Health Ometer Digital Tape Measure Light Dewalt Router Sign Making Design