%!$ Easy Diy Woodworking Bench Plans For You #!@

gel-stain-special-walnut Get Inspired Take hold of inspiration. Drying Time Approximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain gel stain special walnut the surface. Learn More. Weathered Wood. If a lacquer topcoat is desired, test for compatibility before using. Keep container closed when not in use. See How Simple!

They have been reproduced using digital production techniques. Always test stain on a hidden area of the wood to verify desired color. The better the wood preparation, the better the final result. Looking for speed and convenience? Minwax Design Series washes, wood effects and waxes offer new options for bare wood and wood that's already stained. Combine the Minwax Design Series with other Minwax stains to produce on-trend looks, finishes and special effects.

For superior durability and long-lasting beauty, the choice is clear — protective clear finishes from Minwax! Packaged Colors. See Product Details. Get Tips on Choosing a Stain Color. Learn How To Transform. Surface defects should be repaired with an appropriate patching material. Application Stain application varies based on surface material. Please see application instructions below. Application on Bare Wood: Apply stain liberally with brush Gel Stain Application Temperature Zip or soft rag and remove excess, wiping in the direction of the grain.

For a darker color, re-stain when first coat is dry. For a lighter color, wipe with a rag dampened with paint thinner before stain has dried. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while the stain is wet.

Wipe brush often on a lint-free rag to remove excess stain. Application over Painted Surfaces: To create a simulated wood look, apply stain to painted surface with foam or bristle brush or cheesecloth using long, smooth strokes.

Application over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet. If applying stain exteriorly, top coating with an exterior clear finish is strongly recommended. Mixing and Tinting Custom colors can be achieved by intermixing colors or by adding up to 10 ounces of universal or industrial colorant per gallon.

The amount of colorant added may affect its performance and extend dry time. Stir for uniform consistency. Coverage: Approximately 1, to 1, square feet per gallon. If the wood is finely sanded or nonporous, coverage is approximately to 1, square feet per gallon. If the surface is porous, coverage is approximately to square feet per gallon. Coverage will vary significantly depending on application method and condition of wood. Drying Time Approximately 6 to 8 hours depending upon temperature, humidity, air movement, and the amount of stain on the surface.

For additional color depth, a second coat of stain can be applied after 8 hours. Dry time may also be extended due to excess stain application or lack of stain penetration. Cleanup Using a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup.

The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy. However, this stain can be top coated with most clears.

If a lacquer topcoat is desired, test for compatibility before using. When applying water-based finishes, allow a minimum of 24 hours before top coating. Old Masters uses only the finest ingredients to create the highest quality stains available today. Old Masters stains can be used to:. Stain Scrap test piece Stir stick Drop cloth Bristle brush, synthetic brush, foam brush applicator, cheese cloth, or rags Lint-free cloth Mineral spirits or paint thinner Rubber gloves.

Gel Stain. Available colors:. Aged Oak. American Walnut. Carbon Black. Crimson Fire.

Installing Rear Mount Drawer Slides Layout Open Hardware Monitor Ubuntu Auto